User Guide
Table Of Contents
- Notices
- Safety information
- Care and Cleaning
- Disposing of your old product
- ASUS contact information
- Takeback services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Adjusting the mini stands
- 2.2 Attaching the stand (arm/base)
- 2.3 Detaching the stand (for VESA wall mount)
- 2.4 Installing the cable clips
- 2.5 Adjusting the monitor
- 2.6 Connecting the cables
- 2.7 Turning on/off the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Troubleshooting (FAQ)
- 3.3 Supported operating modes
- Chapter 4: Specifications summary
- 4.1 Display
- 4.2 Power
- Chapter 5: Dimension
vi
Care and Cleaning
• The OLED Display does not require any scheduled maintenance activities. In any
case of doubts, contact the ASUSTeK Computer Inc.
• Before you lift or reposition your monitor, it is better to disconnect the cables and
power cord. Follow the correct lifting techniques when positioning the monitor.
When lifting or carrying the monitor, grasp the edges of the monitor.
• Do not lift the display by the stand or the cord.
• Cleaning: Turn your monitor off and unplug the power cord. Clean the monitor
surface with a dry soft cloth or soft tissue, to clean the unit.
• Avoid using a cleaner containing alcohol or acetone. Never spray cleaner directly
on the screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
• When the same image is displayed for hours, an afterimage of the previous screen
may remain after switching the image. The screen will recover slowly or you can
turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore, contact your
dealer or service center to fix it. Do not repair the screen by yourself!