User's Guide

1. Push a pin into the hole on the Nano SIM card tray to eject it.
Insert the Nano SIM card(s) into the card slot(s).
Installing a Nano SIM card
To install a Nano SIM card:
2. Push the tray to close it.
Nano-SIM1
Nano-SIM2
NOTES:
• Forsafetypurposes,ONLY use the bundled power adapter
and cable to avoid damaging your device and prevent the
risk of injury.
• Forsafetypurposes,ONLY use the bundled power adapter
and cable to charge your ROG Phone.
• Theinputvoltagerangebetweenthewalloutletandthis
adapter is AC 100V - 240V. The output voltage of the USB
Type-C cable is +5V-10V 3A, 30W (for ASUS_I001D / ASUS_
I001DC).
IMPORTANT!
• WhenusingyourROGPhonewhileitispluggedtoapower
outlet, the grounded power outlet must be near to the unit
and easily accessible.
• WhenchargingyourROGPhonethroughyourcomputer,
ensure that you plug the USB Type-C cable to your
computer’s USB port.
• DONOTchargeyourROGphoneunderwaterorwhenthe
USB connector is wet.
• AvoidchargingyourROGPhoneinanenvironmentwith
ambient temperature of above 35
°
C (95
°
F).