User manual

2 ASUS Internet Radio
Rear view
1
2
3
ON OFF DC
LAN
R L
LINE OUT
LINE IN
Antenna
1. Power switch: Turn on/off the device.
2. DC power jack: Connect the supplied power cord to this
jack.
3. LAN port: Connect a network cable to this port.
4 Line In jack: If you intend to use the device solely as a
speaker, connect an audio cable to this jack. The device will
automatically switch to AUX mode.
5. Left/right Line Out jack: Connect audio cables to these
jacks to use an additional stereo.
6. Antenna: Set the antenna to a vertical position to ensure
best reception of wireless signal.
4
5
6
NOTE: The front panel functions are repeated on the remote control.
Refer to page 3 and 4 for more information.