User`s manual

xii
Figure 9.4 NAPT – Map Any Internal PCs to a Single Global IP Address............................................................48
Figure 9.5 Reverse Static NAT – Map a Global IP Address to An Internal PC....................................................48
Figure 9.6 Reverse NAPT – Relayed Incoming Packets to the Internal Host Base on the Protocol, Port
Number or IP Address......................................................................................................................................48
Figure 9.7. Inbound ACL Configuration Page.........................................................................................................49
Figure 9.8. Inbound ACL configuration example....................................................................................................52
Figure 9.9. Outbound ACL Configuration Page......................................................................................................54
Figure 9.10. Outbound ACL Configuration Example..............................................................................................57
Figure 9.11. URL Filter Configuration Page............................................................................................................59
Figure 9.12. URL Filter Rule Example.....................................................................................................................60
Figure 9.13. Self Access Rule Configuration Page.................................................................................................61
Figure 9.14. Service List Configuration Page..........................................................................................................63
Figure 9.15. DoS Configuration Page......................................................................................................................66
Figure 9.16. Application Filter Configuration Page.................................................................................................69
Figure 9.17 Network Diagram for FTP Filter Example – Blocking FTP Delete Command..................................69
Figure 9.18. FTP Filter Example – Configuring FTP Filter Rule............................................................................70
Figure 9.19 FTP Filter Example – Firewall Configuration Assistant......................................................................70
Figure 9.20 FTP Filter Example – Add an FTP Filter to Deny FTP Delete Command........................................70
Figure 9.21. FTP Filter Example – Associate FTP Filter Rule to an ACL Rule....................................................71
Figure 9.22. HTTP Filter Example – Configuring HTTP Filter Rule.......................................................................71
Figure 9.23. HTTP Filter Example – Associate HTTP Filter Rule to an ACL Rule...............................................72
Figure 9.24. Modify an Application Filter.................................................................................................................73
Figure 9.25 IP Pool Configuration Page..................................................................................................................74
Figure 9.26. Network Diagram for IP Pool Configuration.......................................................................................75
Figure 9.27. IP Pool Example – Add Two IP Pools – MISgroup1 and MISgroup2..............................................76
Figure 9.28. IP Pool Example – Deny QUAKE-II Connection for MISgroup1......................................................76
Figure 9.29. NAT Pool configuration page..............................................................................................................77
Figure 9.30. Network Diagram for NAT Pool Example...........................................................................................79
Figure 9.31. NAT Pool Example – Create a Static NAT Pool................................................................................79
Figure 9.32. NAT Pool Example – Associate a NAT Pool to an ACL Rule...........................................................80
Figure 9.33. Time Range Configuration Page........................................................................................................81
Figure 9.34. Time Range Example – Create a Time Range..................................................................................82
Figure 9.35. Time Range Example – Deny FTP Access for MISgroup1 During OfficeHours.............................82
Figure 9.36. Firewall active connections statistics..................................................................................................83
Figure 10.1. VPN Tunnel Configuration Page – Pre-shared Key Mode...............................................................91
Figure 10.2. VPN Tunnel Configuration Page – Manual Key Mode......................................................................93
Figure 10.3. VPN Statistics Page.............................................................................................................................96