User Manual
Table Of Contents
- 目錄
- 安全性須知
- 限用物質名稱及含量列表
- 關於這本使用手冊
- K14PA-U12 規格列表
- 第一章:產品介紹
- 第二章:硬體裝置資訊
- 第三章:開啟電源
- 第四章:BIOS 程式設定
- 4.1 管理、更新您的 BIOS 程式
- 4.2 BIOS 設定程式
- 4.3 主選單(Main)
- 4.4 效能調整選單(Performance Tuning menu)
- 4.5 進階選單(Advanced menu)
- 4.5.1 可信賴運算(Trusted Computing)
- 4.5.2 Redfish Host 介面設定(Redfish Host Interface Settings)
- 4.5.3 AMD CBS
- 4.5.4 內建網路設置(Onboard LAN Configuration)
- 4.5.5 UEFI 變量保護(UEFI Variables Protection)
- 4.5.6 序列埠主控台重新導向(Serial Port Console Redirection)
- 4.5.7 CPU 設定(CPU Configuration)
- 4.5.8 PCI 子系統設定(PCI Subsystem Settings)
- 4.5.9 USB 設定(USB Configuration)
- 4.5.10 網路堆疊設定(Network Stack Configuration)
- 4.5.11 NVMe 設定(NVMe Configuration)
- 4.5.12 SATA 設定(SATA Configuration)
- 4.5.13 進階電源管理設定(APM Configuration)
- 4.5.14 AMD 記憶體設定狀態(AMD Mem Configuration Status)
- 4.5.15 T1s Auth
- 4.5.16 第三方 UEFI 驅動程式設定
- 4.5.17 驅動程式狀態(Driver Health)
- 4.6 晶片選單(Chipset menu)
- 4.7 安全性選單(Security menu)
- 4.8 開機選單(Boot menu)
- 4.9 工具選單(Tool menu)
- 4.10 事件記錄選單(Event Logs menu)
- 4.11 伺服器管理選單(Server Mgmt menu)
- 4.12 離開 BIOS 程式(Exit menu)
- 第五章:安裝驅動程式
- 附錄
A-4
附錄
ACTION PHASE POST CODE TYPE DESCRIPTION
PSP Boot
PSP Boot Loader
phase (Error Post
Codes)
0x2A error Invalid die ID executes MCM related function
0x2B error Invalid MCM conguration table read from bootrom
0x2C error Valid boot mode wasn't detected
0x2D error NVStorage init failure
0x2E error NVStorage generic error
0x2F error MCM 'error' to indicate slave has more data to send
0x30 error MCM error if data size exceeds 32B
0x31 error Invalid client id for SVC MCM call
0x32 error
MCM slave status register contains bad bits
0x33 error MCM call was made in a single die environment
0x34 error PSP secure mapped to invalid segment (should be 0x400_0000)
0x35 error No physical x86 cores were found on die
0x36 error Insufcient space for secure OS (range of free SRAM to SVC stack base)
0x37 error SYSHUB mapping memory target type is not supported
0x38
error Attempt to unmap permanently mapped TLB to PSP secure region
0x39 error Unable to map an SMN address to AXI space
0x3A error Unable to map a SYSHUB address to AXI space
0x3B error The count of CCXs or cores provided by bootrom is not consistent
0x3C error Uncompressed image size doesn't match value in compressed header
0x3D error Compressed option used in case where not supported
0x3E error Fuse info on all dies don't match
0x3F error PSP sent message to SMU; SMU reported an error
0x40 error Function RunPostX86ReleaseUnitTests failed in memcmp()
0x41 error Interface between PSP to SMU not available.
0x42 error Timer wait parameter too large
0x43 error Test harness module reported an error
0x44 error x86 wrote C2PMSG_0 interrupting PSP, but the command has an invalid format
0x45 error Failed to read from SPI the Bios Directory or Bios Combo Directory
0x46 error Failed to nd FW entry in SPL Table
0x47 error Failed to read the combo bios header
0x48 error SPL version mismatch
0x49 error Error in Validate and Loading AGESA APOB SVC call
0x4A error Correct fuse bits for DIAG_BL loading not set
0x4B error The UmcProgramKeys() function was not called by AGESA
0x4C error Unconditional Unlock based on serial numbers failure
0x4D error Syshub register programming mismatch during readback
0x4E error Family ID in MP0_SFUSE_SEC[7:3] not correct
0x4F error An operation was invoked that can only be performed by the GM
0x50 error Failed to acquire host controller semaphore to claim ownership of SMB
0x51 error Timed out waiting for host to complete pending transactions
0x52 error Timed out waiting for slave to complete pending transactions
0x53 error Unable to kill current transaction on host, to force idle
0x54 error One of: Illegal command, Unclaimed cycle, or Host time out
0x55 error An smbus transaction collision detected, operation restarted
0x56 error Transaction failed to be started or processed by host, or not completed
0x57 error An unsolicited smbus interrupt was received
0x58 error An attempt to send an unsupported PSP-SMU message was made
(下頁繼續)