User Manual
Table Of Contents
- 目錄
- 安全性須知
- 限用物質名稱及含量列表
- 關於這本使用手冊
- K14PA-U12 規格列表
- 第一章:產品介紹
- 第二章:硬體裝置資訊
- 第三章:開啟電源
- 第四章:BIOS 程式設定
- 4.1 管理、更新您的 BIOS 程式
- 4.2 BIOS 設定程式
- 4.3 主選單(Main)
- 4.4 效能調整選單(Performance Tuning menu)
- 4.5 進階選單(Advanced menu)
- 4.5.1 可信賴運算(Trusted Computing)
- 4.5.2 Redfish Host 介面設定(Redfish Host Interface Settings)
- 4.5.3 AMD CBS
- 4.5.4 內建網路設置(Onboard LAN Configuration)
- 4.5.5 UEFI 變量保護(UEFI Variables Protection)
- 4.5.6 序列埠主控台重新導向(Serial Port Console Redirection)
- 4.5.7 CPU 設定(CPU Configuration)
- 4.5.8 PCI 子系統設定(PCI Subsystem Settings)
- 4.5.9 USB 設定(USB Configuration)
- 4.5.10 網路堆疊設定(Network Stack Configuration)
- 4.5.11 NVMe 設定(NVMe Configuration)
- 4.5.12 SATA 設定(SATA Configuration)
- 4.5.13 進階電源管理設定(APM Configuration)
- 4.5.14 AMD 記憶體設定狀態(AMD Mem Configuration Status)
- 4.5.15 T1s Auth
- 4.5.16 第三方 UEFI 驅動程式設定
- 4.5.17 驅動程式狀態(Driver Health)
- 4.6 晶片選單(Chipset menu)
- 4.7 安全性選單(Security menu)
- 4.8 開機選單(Boot menu)
- 4.9 工具選單(Tool menu)
- 4.10 事件記錄選單(Event Logs menu)
- 4.11 伺服器管理選單(Server Mgmt menu)
- 4.12 離開 BIOS 程式(Exit menu)
- 第五章:安裝驅動程式
- 附錄
華碩 K14PA-U12 主板使用手冊
A-5
ACTION PHASE POST CODE TYPE DESCRIPTION
PSP Boot
PSP Boot Loader
phase (Error Post
Codes)
0x59 error An error/data corruption detected on response from SMU for sent msg
0x5A error MCM Steady-state unit test failed
0x5B error S3 Enter failed
0x5C error AGESA BL did not set PSP SMU reserved addresses via SVC call
0x5D error Reserved PSP/SMU memory region is invalid
0x5E error CcxSecBisiEn not set in fuse RAM
0x5F error Received an unexpected result
0x60 error VMG Storage Init failed
0x61 error
Failure in mbedTLS user app
0x62 error An error occured whilst attempting to SMN map a fuse register
0x63 error Fuse burn sequence/operation failed due to internal SOC error
0x64 error Fuse sense operation timed out
0x65 error Fuse burn sequence/operation timed out waiting for burn done
0x66 error The PMU FW Public key certicate loading or authentication fails
0x67 error
This PSP FW was revoked
0x68
error The platform model/vendor id fuse is not matching the BIOS public key token
0x69 error The BIOS OEM public key of the BIOS was revoked for this platform
0x6A error PSP level 2 directory not match expected value.
0x6B error BIOS level 2 directory not match expected value.
0x6C error Reset image not found
0x6D error Generic error indicating the CCP HAL initialization failed
0x6E error Failure to copy NVRAM to DRAM.
0x6F error Invalid key usage ag
0x70 error Unexpected fuse set
0x71 error RSMU signaled a security violation
0x72 error Error programming the WAFL PCS registers
0x73 error Error setting wa PCS threshold value
0x74 error Error loading OEM trustlets
0x75 error Recovery mode accross all dies is not sync'd
0x76 error Uncorrectable WAFL error detected
0x77 error Fatal MP1 error detected
0x78 error Bootloader failed to nd OEM signature
0x79 error Error copying BIOS to DRAM
0x7A error Error validating BIOS image signature
0x7B error OEM Key validation failed
0x7C error Platform Vendor ID and/or Model ID binding violation
(下頁繼續)