User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Powering Up
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 Redfish Host Interface Settings
- 4.5.3 AMD CBS
- 4.5.4 Onboard LAN Configuration
- 4.5.5 UEFI Variables Protection
- 4.5.6 Serial Port Console Redirection
- 4.5.7 CPU Configuration
- 4.5.8 PCI Subsystem Settings
- 4.5.9 USB Configuration
- 4.5.10 Network Stack Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 SATA Configuration
- 4.5.13 APM Configuration
- 4.5.14 AMD Mem Configuration Status
- 4.5.15 T1s Auth
- 4.5.16 Third-party UEFI driver configurations
- 4.5.17 Driver Health
- 4.6 Chipset menu
- 4.7 Security menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Server Mgmt menu
- 4.12 Exit menu
- Chapter 5: Driver Installation
- Appendix
4-8
4.4 Performance Tuning menu
The Performance Tuning menu items allow you to change performance related settings for
different scenarios.
Optimized Performance Setting [Default]
Allows you to select performance settings for different scenarios.
[Default] Default settings.
[By Benchmark] Optimize for different kinds of benchmarks. Select this option, then select a
benchmark type from the >> list.
[By Workload] Optimize for different kinds of workloads. Select this option, then select a
workload type from the >> list.
This function will reset some BIOS settings that you have changed back to their default
values. Please check your BIOS settings again.
The following item appears only when Power Balancer is set to [Disabled], or if Optimized
Performance Setting is set to [Default] or [By Benchmark].
Core Optimizer [Disabled]
Allows you to keep the processor operating at the turbo highest frequency for the
maximum performance.
Configuration options: [Disabled] [Auto] [Manual]
The following item appears only when you set Core Optimizer to [Manual].
CPU Max frequency [XXXX]
The default value for this option will be the maximum supported frequency of
the CPU installed and may vary between different CPUs.
The following item appears only when Optimized Performance Setting is set to [Default]
or [By Benchmark].
Engine Boost [Disabled]
Enable this item to boost the CPU's frequency. Recommended operation at an ambient
temperature of 25°C or below for optimized performance.
Configuration options: [Disabled] [Normal] [Aggressive]
Operate with an ambient temperature of 25
o
C or lower for optimized performance.