User Manual

A-9
ACTION PHASE POST CODE TYPE DESCRIPTION
PSP Boot
PSP Boot Loader
phase (Status Post
Codes)
0xE5 error Bootloader read the MP1 SRAM successfully
0xE6 error Bootloader successfully reset MP1
0xE7 error DF init successfully done (in absence of AGESA)
0xE8 error UMC init successfully done (in absence of AGESA)
0xE9 error LX6 Boot ROM code ready
0xEA error Bootloader successfully asserted LX6 reset
0xEB error LX6 load to SRAM success
0xEC error Bootloader successfully set LX6 reset vector to SRAM
0xED error Bootloader successfully de-asserted LX6 reset
0xEE error LX6 firmware is running and ready
0xEF error Loading of S3 image done successfully
0xF0 error Bootloader successfully verify signed image using 4K/2K key
0xF1 error Bootloader identified as running on SP32P or multi-socket boot
0xF2 error Security Policy check successful (only in secure boot)
0xF3 error Bootloader successfully loaded SS3
0xF4 error Bootloader successfully load fTPM Driver
0xF5 error Bootloader successfully loaded sys_drv
0xF6 error Bootloader successfully loaded secure OS
0xF7 error Bootloader about to transfer control to secureOS
0xFF error Bootloader sequence finished
Quick VGA
PEI(Pre-EFI
Initialization) phase
0x10 Progress PEI Core Entry
0x11 Progress PEI cache as ram CPU initial
0x15 Progress NB Initialization before installed memory
0x19 Progress SB Initialization before installed memory
(continued on the next page)