Specifications

5-505-50
5-505-50
5-50
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
5.5 Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows
®
2000/XP operating system. You can create a RAID driver disk using your
motherboard support CD.
To create a RAID driver disk:
1. Insert the motherboard support CD into the CD-ROM drive.
2. Insert a clean floppy disk into the floppy disk drive.
3. To create an NVIDIA
®
RAID driver disk, click
Make an NvidiaMake an Nvidia
Make an NvidiaMake an Nvidia
Make an Nvidia
Chipset Driver DiskChipset Driver Disk
Chipset Driver DiskChipset Driver Disk
Chipset Driver Disk item from the
Drivers Drivers
Drivers Drivers
Drivers menu.
To create a Silicon Image SATARaid™ RAID driver disk, click
MakeMake
MakeMake
Make
Silicon SATA/RAID Driver DiskSilicon SATA/RAID Driver Disk
Silicon SATA/RAID Driver DiskSilicon SATA/RAID Driver Disk
Silicon SATA/RAID Driver Disk item from the
Drivers Drivers
Drivers Drivers
Drivers menu.
For additional information on RAID installation and configuration, refer to
the Manuals menu of the support CD.
4. Follow succeeding screen information to complete process.
5. Write-protect the floppy disk to avoid computer virus infection.
To install the RAID driver:
1. During the OS installation, the system prompts you to press the
F6F6
F6F6
F6
key to install third-party SCSI or RAID driver.
2. Press <F6> then insert the floppy disk with RAID driver into the floppy
disk drive.
3. Follow the succeeding screen instructions to complete the installation.
Refer to section “5.2.2 Drivers menu” for details.