Specifications

ASUS K8N4-E DeluxeASUS K8N4-E Deluxe

ASUS K8N4-E Deluxe

2-212-21

2-21

2.2.

IDE connectors (40-1 pin PRI_IDE, SEC_IDE)IDE connectors (40-1 pin PRI_IDE, SEC_IDE)

IDE connectors (40-1 pin PRI_IDE, SEC_IDE)

These connectors are for an Ultra DMA 133/100/66 signal cable. The

Ultra DMA 133/100/66 signal cable has three connectors: a blue

connector for the primary IDE connector on the motherboard, a black

connector for an Ultra DMA 133/100/66 IDE slave device (optical

drive/hard disk drive), and a gray connector for an Ultra DMA 133/

100/66 IDE master device (hard disk drive). If you install two hard disk

drives, you must configure the second drive as a slave device by setting

its jumper accordingly. Refer to the hard disk documentation for the

jumper settings.

• Pin 20 on the IDE connector is removed to match the covered hole

on the Ultra DMA cable connector. This prevents incorrect insertion

when you connect the IDE cable.

• Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE

devices.

K8N4-E

K8N4-E DELUXE IDE connectors

SEC_IDE

PRI_IDE

PIN 1PIN 1

NOTE: Orient the red marking

(usually zigzag) on the IDE

ribbon cable to PIN 1.