User Guide

1-20 Chapter 1: Product Introduction

7. USB 2.0 ports 3 and 4.

These two 4-pin Universal Serial Bus (USB) ports are

available for connecting USB 2.0 devices.

8. USB 2.0 ports 1 and 2.

These two 4-pin Universal Serial Bus (USB) ports are

available for connecting USB 2.0 devices

9. Video Graphics Adapter port.

This 15-pin port is for a VGA monitor or other

VGA-compatible devices.

10.

Serial port.

This 9-pin COM1 port is for pointing devices or other serial devices.

11. PS/2

keyboard port (purple).

This port is for a PS/2 keyboard.

1.10.2 Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY)

This connector is for the provided oppy drive (FDD) signal cable. Insert one

end of the cable to this connector, then connect the other end to the signal

connector at the back of the oppy disk drive.

K8V-VM Floppy Disk Drive Connector

NOTE: Orient the red markings on

the floppy ribbon cable to PIN 1.

PIN 1

FLOPPY

K8V-VM

Pin 5 on the connector is removed to prevent incorrect cable connection when

using an FDD cable with a covered Pin 5.