User's Manual

2 ASUS KCMA-D8KCMA-D8

15G065314100

6. Close the load plate (A), then push

the load lever (B) until it snaps into the

retention tab.

8. Remove the PnP cap from the CPU

socket.

7. Apply some Thermal Interface Material to the exposed area of the CPU that the

heatsink will be in contact with, ensuring that it is spread in an even thin layer. Some

heatsinks come with pre-applied Thermal Interface Material. If so, skip this step.

The CPU ts in only one correct

orientation. DO NOT force the CPU

into the socket to prevent bending

the connectors on the socket and

damaging the CPU!

5. Position the CPU over the socket, ensuring

that the gold triangle is on the bottom-right

corner of the socket, and then t the socket

alignment keys into the CPU notches.

Gold triangle mark

CPU notch

IE6016_KCMA-D8_Insert.indd 2 10/4/13 5:00:56 PM