User Manual

2-8
Chapter 2: Hardware Information
5. SlidethecarrierframewithCPUintothe
railframe,thenremovethePnPcap.
ThecarrierframewithCPUtsinonly
one correct orientation. DO NOT force
thecarrierframewithCPUintothe
rail frame.
6. Gently push the rail frame just enough
toletitsitontopoftheCPUsocket.
7. Closetheloadplatejustenoughtolet
itsitontopoftheCPU,thensecure
each screw one by one in the sequence
shown on the socket to completely
secure the load plate.
TheloadplatescrewsareT20
models. A torque value of 12 inch-lbf
is recommended.
Rail frame
Carrier frame
with CPU
PnP cap
Carrier frame
with CPU