User Manual

2-30
Chapter 2: Hardware Information
13. Chassis Intrusion connectors (2-pin INTRUSION)
This lead is for the intrusion detection feature for chassis with intrusion sensor or
microswitch.Whenyouremoveanychassiscomponent,thesensortriggersandsends
a high level signal to these leads to record a chassis intrusion event. The default setting
isshortCASEOPENandGNDpinbyjumpercaptodisablethefunction.
14. OCUPCIE connectors (MPCIE_HD1-6)
ConnectsthePCIEsignaltotheNVMEportonthebackplane.