User Manual

4-23
KNPA-U16
4.4.15 iSCSI Configuration
AllowsyoutoconguretheiSCSiparameters.
USB hardware delays and time-outs
USB transfer time-out [20 sec]
Allowsyoutoselecttime-outvalueforControl,Bulk,andInterrupttransfers.
Congurationoptions:[1sec][5sec][10sec][20sec]
Device reset time-out [20 sec]
Allows you to select time-out value for USB mass storage device Start Unit command.
Congurationoptions:[10sec][20sec][30sec][40sec]
Device power-up delay [Auto]
Allowsyoutoselectmaximumtimethedevicewilltakebeforeitproperlyreportsitselftothe
HostController.
Congurationoptions:[Auto][Manual]
Mass Storage Devices
AMI Virtual CDROM0-2 / Floppy / HDisk0 1.00 [Auto]
Allows you to select the mass storage device emulation type.
Congurationoptions:[Auto][Floppy][ForcedFDD][HardDisk][CD-ROM]