User Manual
ROG Spatha Gaming Mouse
5
Getting started
To set up your ROG Spatha Gaming Mouse as a wired mouse:
1. Connect the micro USB cable to your ROG Spatha Gaming Mouse.
2. Connect the USB cable to your computer’s USB port.
To set up your ROG Spatha Gaming Mouse as a wireless mouse:
1. Connect the micro USB cable to your wireless receiver/charging dock.
2. Connect the USB cable to your computer’s USB port.
NOTE: Download the driver from http://www.asus.com then install it in your computer.
Replacing the switches
NOTE: Refer to www.asus.com for the list of compatible switches.
If you want to replace the switches, follow the steps below:
1. Remove the four (4) screws and set it aside.
2. Remove the top cover.
3. Replace the switches.
Switch socket
Switch socket
Mouse switches
IMPORTANT!
• Ensure to install the switch into the switch socket with its button facing the front of the mouse.
• Ensure that the switches are seated properly in the switch sockets.
4. Place the top cover and secure it with the four (4) screws.
English