Network Card User Manual

4 Chapter 2 Hardware Installation

2. HW Installattion

2.2 LAN/SCSI card Settings

1) SCSI Controller Setting (SCSI_EN)

This jumper allows you to enable/disable the SCSI controller function. The default

setting is Enable.

SCSI Controller Setting

123

Disable

Enable

SCSI_EN

LAN_EN

2) LAN Controller Setting (LAN_EN) (only on model with LAN controller)

This jumper allows you to enable/disable the LAN controller function. The default

setting is Enable.

LAN Controller Setting

123

Disable

Enable

LAN_EN

SCSI_EN