Network Card User Manual

8 Chapter 2 Hardware Installation
2. HW Installattion
2.6 Connecting Devices
You can connect a total of 30 SCSI devices to the ASUS LS99 LAN/SCSI card, with
up to 15 devices on each SCSI channel. Before connecting devices, be sure to review
2.5 Setting Up SCSI Devices.
2.6.1 Connecting Internal Ultra160 and Ultra2 Devices
A special 68-pin LVD cable is provided to connect internal Ultra160 or Ultra2 SCSI
devices. If your cables are not marked, you can identify most LVD cables as having
twisted pairs of the flat ribbon cable between the device connectors.
The ASUS LS99 LAN/SCSI card has two separate Ultra160 SCSI channels, as shown
in 2.1 ASUS LS99 LAN/SCSI card Layout. Each channel has an internal LVD/SE
connector to which you can connect internal SCSI devices. Follow these steps to
connect your internal Ultra160 and Ultra2 devices.
NOTE: We recommend that Ultra160 and Ultra2 SCSI devices are
kept on a separate SCSI channel from Ultra SCSI devices. This allows
the newer Ultra160 and Ultra2 SCSI devices to transfer data at their
maximum speed.
Internal Ultra160 and Ultra2 SCSI Connectors
Internal Ultra160
1
35
34
68
CHA-WIDE
Internal Ultra160
1
35
34
68
CHB-WIDE
®
1. Locate the provided 68-pin internal LVD SCSI cable, which has the twisted
wires.
2. Plug the non-terminated end of the cable(s) to the internal LVD/SE connector(s).
Pin-1 must match on all connections.