User's Manual

4-26
Chapter 4: BIOS setup
Address/Command Fine Delay
Conguration options: [Auto] [No delay] [1/64 MEMCLK delay] [2/64 MEMCLK
delay] [3/64 MEMCLK delay] [4/64 MEMCLK delay] [5/64 MEMCLK delay]...[30/64
MEMCLK delay] [31/64 MEMCLK delay]
Address/Command Setup Time
Conguration options: [Auto] [1/2 MEMCLK] [1 MEMCLK]
Read DQS Timing Control
Conguration options: [Auto] [No delay] [1/64 MEMCLK delay] [2/64 MEMCLK
delay] [3/64 MEMCLK delay] [4/64 MEMCLK delay] [5/64 MEMCLK delay]...[46/64
MEMCLK delay] [47/64 MEMCLK delay]
Write Data Timing Control
Conguration options: [Auto] [No delay] [1/64 MEMCLK delay] [2/64 MEMCLK
delay] [3/64 MEMCLK delay] [4/64 MEMCLK delay] [5/64 MEMCLK delay]...[46/64
MEMCLK delay] [47/64 MEMCLK delay]
DQS Receiver Enable Timing
Conguration options: [Auto] [0 ps] [50 ps] [100 ps] [150 ps] [200 ps] [250 ps]
[300 ps] [350 ps] [400 ps]...[8550 ps] [8600 ps] [8650 ps] [8700 ps]
Output Driver Control
CKE Drive Strength
Conguration options: [Auto] [1.00x] [1.25x] [1.50x] [2.00x]
CS/ODT Drive Strength
Conguration options: [Auto] [1.00x] [1.25x] [1.50x] [2.00x]
Add/CMD Drive Strength
Conguration options: [Auto] [1.00x] [1.25x] [1.50x] [2.00x]
MEMCLK Drive Strength
Conguration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]
Data Drive Strength
Conguration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]
DQS Drive Strength
Conguration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]
DRAM Drivers Weak Mode
Conguration options: [Auto] [Normal] [Weak]
SLI Ready Memory [Disabled]
Allows you to select the SPD prole for SLI-Ready memory modules. The conguration
options may vary depending on the type of module you installed.
Conguration options: [Disabled] [Optimal] [High Frequency] [High Performance]
AMD Cool ‘n’ Quiet Function [Enabled]
Enables or disables the AMD Cool ‘n’ Quiet technology.
Conguration options: [Disabled] [Enabled]
AMD Live! [Disabled]
Enables or disables the AMD Live! technology.
Conguration options: [Disabled] [Enabled]