Specifications
4-44
Chapter 4: BIOS setup
Load from File
Allows you to load the previous BIOS le saved in the hard disk/oppy disk/USB
ash disk with the FAT32/16/12 format. Follow the instructions below to load the
BIOS le.
1. Insert the storage devices that contains the “xxx.CMO” le.
2. Turn on the system.
3. Enter BIOS setup program. Go to the “Tools” menu to select “Load from
File.” Press <Enter> then the setup screen will appear.
4. Press <Tab> to switch between drives before the correct “xxx.CMO” le
is found. Then press <Enter> to load the le.
5. A pop-up message will inform you when the loading process nishes.
• Suggest only to update the BIOS le coming from the same memory/CPU
conguration and BIOS version.
• Only the “xxx.CMO” le can be loaded.
Select Menu
Item Specic Help
Load BIOS Prole from
Prole 1.
Load BIOS Prole
Load from Prole 1
Load from Prole 2
Load from File
Phoenix-AwardBIOS CMOS Setup Utility
Tools
Select Menu
Item 0 Help
Save current BIOS Prole
to Prole 1.
Save BIOS Prole
Save to Prole 1
Save to Prole 2
Save to File
Phoenix-AwardBIOS CMOS Setup Utility
Tools
Save BIOS Prole
Save to Proe 1/2
Allows you to save the current BIOS le to the BIOS Flash. Press <Enter> to save
the le.