User Guide

ManualsBrandsASUS ManualsOtherM2N32-WS-PRO

Motherboard

M2N32 WS

Professional

Summary of content (130 pages)

PAGE 1
Professional Motherboard M2N32 WS
PAGE 2
E2560 First Edition V1 May 2006 Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
PAGE 3
Contents Notices......................................................................................................... vii Safety information..................................................................................... viii About this guide.......................................................................................... ix M2N32 WS Professional specifications summary.................................... xi Chapter 1: Product introduction 1.1 Welcome!..................................
PAGE 4
Contents 2.6 2.7 Jumper......................................................................................... 2-25 Connectors.................................................................................. 2-27 2.7.1 2.7.2 Chapter 3: 3.1 3.2 3.2.1 Using the dual function power switch............................... 3-2 BIOS setup 4.1.1 ASUS Update utility......................................................... 4-1 4.1.3 ASUS EZ Flash 2 utility.................................................
PAGE 5
Contents 4.3.7 HDD SMART Monitoring................................................ 4-18 4.3.9 Usable Memory.............................................................. 4-18 4.4.1 JumperFree Configuration............................................. 4-19 4.4.3 PEG Link Mode.............................................................. 4-23 4.4.5 Chipset........................................................................... 4-27 4.3.8 4.4 Advanced menu.......................................
PAGE 6
Contents Chapter 5: 5.1 5.2 Support CD information............................................................... 5-1 5.2.1 Running the support CD.................................................. 5-1 5.2.3 Utilities menu................................................................... 5-3 5.2.2 5.2.4 5.2.5 5.2.6 5.2.7 vi Software support Installing an operating system.................................................... 5-1 Drivers menu............................................................
PAGE 7
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 8
Safety information Electrical safety • • • • • • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
PAGE 9
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
PAGE 10
Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
PAGE 11
M2N32 WS Professional specifications summary CPU Socket AM2 for AMD Athlon™64 FX/Athlon™ 64 X2/ Athlon™ 64/Sempron™ processor Supports AMD Cool ‘n’ Quiet™ Technology AMD64 architecture enables simultaneous 32-bit and 64-bit computing Chipset NVIDIA® nForce® 590 SLI™ MCP(NVIDIA® LinkBoost™ Technology, NVIDIA® Tritium Technology certified) North bridge: NVIDIA® C51XE South bridge: NVIDIA® MCP55PXE PCI-X bridge: NEC uPD720404 System bus 2000 / 1600 MT/s Memory Dual-channel memory architecture - 4 x 24
PAGE 12
M2N32 WS Professional specifications summary High Definition Audio SoundMAX® ADI AD1988B 8-channel CODEC Supports Jack-Sensing, Enumeration, Multi-Streaming, and Jack-Retasking Technology Optical and Coaxial S/PDIF Out interfaces IEEE 1394 T1 1394 controller supports: - 2 x IEEE 1394a connectors (at mid-board) USB Supports up to 10 USB 2.0/1.
PAGE 13
M2N32 WS Professional specifications summary Rear panel 1 x PS/2 keyboard port (purple) 1 x PS/2 mouse port (green) 1 x Parallel port 1 x External Serial ATA 3.0 Gb/s 1 x Optical S/PDIF Out port 1 x Coaxial S/PDIF Out port 2 x LAN (RJ-45) ports 4 x USB 2.0/1.1 ports 8-channel audio ports Internal connectors 3 x USB 2.0 connectors support six additional USB 2.
PAGE 14
xiv
PAGE 15
This chapter describes the motherboard features and the new technologies it supports.
PAGE 16
Chapter summary 1 1.1 Welcome!....................................................................................... 1-1 1.3 Special features............................................................................. 1-2 1.2 Package contents..........................................................................
PAGE 17
1.1 Welcome! Thank you for buying an ASUS® M2N32 WS Professional motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents Check your motherboard package for the following items.
PAGE 18
1.3 Special features 1.3.1 Product highlights Latest processor technology The motherboard comes with a 940-pin AM2 socket that supports AMD Athlon™ 64 X2/Athlon™ 64/Athlon™ FX/Sempron™ processor. With an integrated lowlatency high-bandwidth memory controller and a highly scalable HyperTransport™ technology-based system bus, the motherboard provides a powerful platform for your diverse computing needs, increased office productivity, and enhanced digital media experience. See page 2-7 for details.
PAGE 19
PCI Express™ interface The motherboard fully supports PCI Express, the latest I/O interconnect technology that speeds up the PCI bus. PCI Express features point‑to‑point serial interconnections between devices and allows higher clockspeeds by carrying data in packets. This high speed interface is software compatible with existing PCI specifications. See page 2-18 for details. Serial ATA I/II technology and SATA-On-The-Go The motherboard fully supports the Serial ATA II 3.
PAGE 20
Dual Gigabit LAN solution The motherboard comes with dual Gigabit LAN controllers to provide the total solution for your networking needs. These network controllers use the PCI Express segment to provide faster data bandwidth for your wired or wireless Internet, LAN, and file sharing requirements. See page 2-27 for details.
PAGE 21
1.3.2 ASUS Special features AI Gear AI Gear allows users to choose from four modes to adjust CPU, FSB speed and Vcore voltage, minimizing noise and power consumption. Users can choose the mode that best suits their needs. See page 4-20 for details AI Nap With AI Nap, the system can continue running at minimum power and noise when the user is temporarily away. To wake the system and return to the OS environment, simply click the mouse or press a key.
PAGE 22
ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 allows users to restore corrupted BIOS data from a USB flash disk containing the BIOS file. This utility saves users the cost and hassle of buying a replacement BIOS chip. See page 4-9 for details. ASUS EZ Flash 2 EZ Flash 2 is a user-friendly BIOS update utility. Simply press the predefined hotkey to launch the utility and update the BIOS without entering the OS.
PAGE 23
Q-Connector The ASUS Q-Connector allows you to connect or disconnect chassis front panel cables in one easy step with one complete module. This unique adapter eliminates the trouble of plugging in one cable at a time, making connection quick and accurate. ASUS O.C. Profile The motherboard features the ASUS BIOS Profile that allows users to conveniently store or load multiple BIOS settings.
PAGE 24
1- Chapter 1: Product introduction
PAGE 25
This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.
PAGE 26
Chapter summary 2 2.1 Before you proceed...................................................................... 2-1 2.3 Central Processing Unit (CPU).................................................... 2-7 2.2 2.4 2.5 2.6 2.7 Motherboard overview.................................................................. 2-2 System memory.......................................................................... 2-12 Expansion slots...........................................................................
PAGE 27
2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or to a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on them.
PAGE 28
2.2 Motherboard overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. 2.2.1 Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct orientation.
PAGE 29
2.2.3 ASUS Stack Cool 2 The motherboard comes with the ASUS Stack Cool 2 cooling solution that lowers the temperature of critical heat generating components by 20ºC. The motherboard uses a special design on the printed circuit board (PCB) to dissipate heat that critical components generate.
PAGE 30
2.2.5 Motherboard layout 24.5cm (9.6in) PS/2KBMS T: Mouse B: Keyboard SPS_FAN1 PCIEX1_1 NEC uPD720404 EXT_SATA1 PCIX_SPEED Marvell 88SE614x PCIX_1 Marvell 88E1116 PRI_IDE PCIEX16_1 EXT_SATA3 EXT_SATA2 Marvell 88E1116 ® nVIDIA C51XE 30.5cm (12.
PAGE 31
2.2.4 Layout contents Slots 1. 2. 3. 4. 5. DDR2 DIMM slots PCI slots PCI Express x16 slots PCI Express x1 slot PCI-X slots Page 2-12 2-18 2-18 2-18 2-18 Jumper 1. Clear RTC RAM (3-pin CLRTC) Page 2-25 Rear panel connectors 1. PS/2 mouse port (green) 2. Parallel port 3. LAN 1 (RJ-45) port 4. LAN 2 (RJ-45) port 5. Rear Speaker Out port (black) 6. Center/Subwoofer port (orange) 7. Line In port (light blue) 8. Line Out port (lime) 9. Microphone port (pink) 10. Side Speaker Out port (gray) 11. USB 2.
PAGE 32
Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) 2. NVIDIA® IDE connector (40-1 pin PRI_IDE) 3. Marvell® IDE connector (40-1 pin PRI_EIDE) 4. NVIDIA® nForceNVIDIA® 590 SLI Southbridge Serial ATA connectors (7-pin SATA1 [red], SATA2 [red], SATA3 [red], SATA4 [red], SATA5 [red], SATA6 [red]) 5. Marvell® 88SE614x Serial ATA connector (7-pin EXT_ SATA1, EXT_SATA2, EXT_SATA3) 6. USB connectors (10-1 pin USB56, USB78, USB910) 7.
PAGE 33
2.3 Central Processing Unit (CPU) The motherboard comes with a 940-pin AM2 socket designed for the AMD Athlon™ 64 X2/Athlon™ 64 FX/Athlon™ 64/Sempron™ processor. The AM2 socket has a different pinout from the 939-pin socket designed for the AMD Opteron™ processor. Make sure you use a CPU is designed for the AM2 socket. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 2.3.
PAGE 34
3. 4. Position the CPU above the socket such that the CPU corner with the gold triangle matches the socket corner with a small triangle. Carefully insert the CPU into the socket until it fits in place. Gold triangle Small triangle 5. 6. 2- When the CPU is in place, push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked. Install a CPU heatsink and fan following the instructions that came with the heatsink package.
PAGE 35
2.3.2 Installing the heatsink and fan The AMD Athlon™ 64FX/Athlon™ 64/Athlon™ 64 X2/Sempron™ processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. Make sure that you use only AMD-certified heatsink and fan assembly. To install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU, making sure that the heatsink fits properly on the retention module base.
PAGE 36
2. Attach one end of the retention bracket to the retention module base. 3. Align the other end of the retention bracket (near the retention bracket lock) to the retention module base. A clicking sound denotes that the retention bracket is in place. Make sure that the fan and heatsink assembly perfectly fits the retention mechanism module base, otherwise you cannot snap the retention bracket in place. 4.
PAGE 37
5. When the fan and heatsink assembly is in place, connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. CPU_FAN GND CPU FAN PWR CPU FAN IN CPU FAN PWM M2N32 WS PRO ® M2N32 WS PRO CPU fan connector Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector.
PAGE 38
2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to prevent installation on a DDR DIMM socket.
PAGE 39
2.4.2 Memory configurations You may install 256 MB, 512 MB, and 1 GB unbuffered ECC/non-ECC DDR2 DIMMs into the DIMM sockets. • For dual-channel configuration, the total size of memory module(s) installed per channel must be the same (DIMM_A1 + DIMM_B1 = DIMM_A2 + DIMM_B2). • Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor. Visit the ASUS website (www.asus.com) for the latest Qualified Vendors List.
PAGE 40
Qualified Vendors Lists (QVL) DDR2-800 SIZE Type Vendor Module 256Mbytes 512Mbytes Unbuffer Unbuffer Samsung Hynix M378T3253FZ3-CE7 HYMP564U64AP8-S6 SIZE Type Vendor Module 256Mbytes Unbuffer Unbuffer Unbuffer Unbuffer Hynix Micron Samsung HYMP532U64AP6-Y5 AA MT8HTF3264AY-667B5 M378T3253FZ0-CE6 ECC Unbuffer Unbuffer Unbuffer Unbuffer Unbuffer Unbuffer Unbuffer Unbuffer Unbuffer ECC ECC Unbuffer Unbuffer Unbuffer Apacer Adata Hynix Hynix Kingmax Micron Micron Samsung Samsung Samsung Corsair
PAGE 41
2.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. 2 To install a DIMM: 1. 2. 3. 3 Unlock a DIMM socket by pressing the retaining clips outward. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket.
PAGE 42
2.5 Expansion slots In the future, you may need to install expansion cards. The following sub‑sections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 2.5.1 Installing an expansion card To install an expansion card: 1. 2. 3. 4. 5. 6.
PAGE 43
2.5.
PAGE 44
2.5.4 PCI slot The PCI slot supports cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. Refer to the figure below for the location of the slot. 2.5.5 Two PCI-X slots The PCI-X slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI-X 1.0 specifications. Refer to the figure below for the location of the slots. 2.5.
PAGE 45
• Connect a rear chassis fan to the chassis (CHA_FAN1 or CHA_FAN2) connector when using two graphics cards for better thermal environment. See page 2-33 for details. • In single card mode, you may use either the blue or black slot for PCI Express x16 cards. • In NVIDIA® SLI™ mode, the PCI Express x16 slots work at the full bandwidth of PCI Express x16 for a combined bandwidth of x32. • We recommend that you provide sufficient power when running NVIDIA® SLI™ mode. See page 2-31 for details.
PAGE 46
Qualified graphics cards Model Type: Type: PCI PCI Connect Interface OS Environment WinXP Pro Status Chipset ATI GC-R92SEPCI-C3 Rev.1.1 (BIOS: V8.011.006) PCI1 Pass ATI Radeon 9200SE Gecube R7000PCI-A3 Rev. 1.1 (BIOS: V008.004) PCI1 Win2000 Pro (CHT) Pass ATI Radeon 7000 Gecube R9250PCI-D3 Rev. 1.0 (BIOS: V008.011) PCI1 Win2003 R2 Standard (CHS) Pass ATI Radeon 9250 Matrox G200 MMS Rev. A (BIOS: V3.3 b34) PCI1 Win2000 Pro (CHT) Pass Matrox G200 Matrox PH-P256 Rev. A (BIOS: V1.1.
PAGE 47
Qualified graphics cards Model Type: PCIEX16 PCI Type: Connect Interface OS Environment Status Chipset ASUS EAX1300 (BIOS: V113.AA77100.102) PCIEX16_1 Win2003-64 R2 Standard Pass ATI Radeon X1300 ASUS EAX1800XT 512MB (BIOS: V7100.9.12.4.2.AS01) PCIEX16_1 WinXP Pro. Pass ATI Radeon X1800XT ASUS EAX1600XT Silent 256MB V.1.00 (BIOS: 71C0.9.12.4.2) PCIEX16_2 Win2000 Pro Pass ATI Radeon X1600XT ASUS EAX1900CrossFire (BIOS: 7249.9.12.5.2AS05) PCIEX16_1 WinXP Pro.
PAGE 48
Qualified graphics cards Model Type: Type:PCIEX16 PCI Connect Interface OS Environment Status Chipset Elsa Gladiac 660GT 128MB3 Rev: 2B (BIOS: V5.43.02.46.E1) PCIEX16_1 PCIEX16_2 WinXP Pro.(CHT) Pass nVidia GeForce 6600GT Elsa Gladiac 780GTX 256B3 (BIOS: V5.70.02.11.E1) PCIEX16_1 PCIEX16_2 WinXP Pro.(CHT) Pass nVidia GeForce 7800GTX Gecube RADEON X550 256M (BIOS:V008.015.028.000) PCIEX16_1 WinXP Pro. Pass ATI Radeon X550 Gecube RADEON X1300PRO (BIOS: V133.A671B1.
PAGE 49
Qualified graphics cards (Work station level) Model Type: Type: PCIEX16 PCI Connect Interface OS Environment Status Chipset ASUS EN6600 128M Rev V1.00A (BIOS: V5.43.02.61) PCIEX16_1 WinXP Pro. (CHT) Pass nVidia GeForce 6600 GIGABYTE GV-RX19X512VBRH (Bios:113A52021-104) PCIEX16_2 WinXP-64 Pro. Pass ATI Radeon X1900XTX Leadtek WinFast PX6200TC 64M Rev. A (BIOS: V5.44.02.
PAGE 50
SCSI RAID controllers Model PCI-X Type: PCI Intel SRCU42L (BIOS: V2.34.05-Ro43) Model Type: PCI Mylex AcceleRAID 170 Rev.A (BIOS: V6.01-30) Model PCIEX8 Type: PCI Intel SRCU42E Ultra320 (BIOS: H420) Connect Interface PCIX_2 Connect Interface PCI1 Connect Interface PCIEX16_2 OS Environment Status WinXP Pro. Pass OS Environment Status Win2003 R2 Standard Pass OS Environment Status WinXP Pro.
PAGE 51
2.6 Jumper Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Remove the onboard battery. 3. Move the jumper cap from pins 1-2 (default) to pins 2-3.
PAGE 52
2. PCI-X Speed setting (6-pin PCIX_SPEED) This jumper allows you to set the PCI-X slots’ maximum frequency capability. Default setting [Auto]: a single PCI-X card installed on a PCI-X slot can provide 133 MHz capability, and two PCI-X cards installed on both PCI-X slots can provide 100 MHZ capability for reliability. 3~4: the slots will have 133 MHZ capability whether you install one or two cards. 5~6: the slots will have 100 MHZ capability whether you install one or two cards.
PAGE 53
2.7 Connectors 2.7.1 Rear panel connectors 1 2 16 1. 2. 3. 4. 15 14 13 3 4 12 11 56 78 10 9 PS/2 mouse port (green). This port is for a PS/2 mouse. Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices. LAN 1 (RJ-45) port. Supported by Marvell® 88E1116 Gigabit LAN controller, this port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED indications. LAN 2 (RJ-45) port.
PAGE 54
9. Microphone port (pink). This port connects a microphone. 10. Side Speaker Out port (gray). This port connects the side speakers in an 8-channel audio configuration. Refer to the audio configuration table below for the function of the audio ports in 2, 4, 6, or 8-channel configuration. Audio 2, 4, 6, or 8-channel configuration Port Light Blue Lime Pink Gray Black Orange 11.
PAGE 55
2.7.2 1. Internal connectors Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive. Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5. FLOPPY NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.
PAGE 56
PRI_IDE NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. M2N32 WS PRO ® M2N32 WS PRO IDE connector 3. Marvell® IDE connector (40-1 pin PRI_EIDE) This connector is for the Ultra DMA 133/100/66 signal cable. The Marvell IDE connector supports up to 2 IDE hard disk drives for easier data storage. PRI_EIDE NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.
PAGE 57
4. NVIDIA® nForce® 590 SLI Southbridge Serial ATA connectors (7-pin SATA1 [red], SATA2 [red], SATA3 [red], SATA4 [red], SATA5 [red], SATA6 [red]) These connectors are for the Serial ATA signal cables for Serial ATA 3.0 Gb/s hard disk and optical disk drives. The Serial ATA 3.0 Gb/s is backward compatible with Serial ATA 1.5 Gb/s specification.
PAGE 58
5. Marvell® 88SE614x Serial ATA connectors (7-pin EXT_SATA1, EXT_SATA2, EXT_SATA3) These connectors are for Serial ATA signal cables. These connectors support Serial ATA hard disk drives.
PAGE 59
USB connectors (10-1 pin USB56, USB78, USB910) These connectors are for USB 2.0 ports. Connect the USB/GAME module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. USB+5V USB_P10USB_P10+ GND NC 6. 1 ® 1 M2N32 WS PRO USB 2.
PAGE 60
8. CPU, Chassis, and Power Fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN1, 3-pin CHA_FAN2, 3-pin CHA_FAN3, 3-pin CHA_FAN4, 3-pin SPS_FAN1) The fan connectors support cooling fans of 350 mA ~ 2000 mA (24 W max.) or a total of 1 A ~ 3.48 A (41.76 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors.
PAGE 61
9. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event.
PAGE 62
For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 600 W. • Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot. • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.
PAGE 63
12. Internal audio connector (4-pin CD [Black]) M2N32 WS PRO CD (black) Right Audio Channel Ground Ground Left Audio Channel These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card. ® M2N32 WS PRO Internal audio connector 13 Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.
PAGE 64
14. TPM connector (20-1 pin TPM) ® TPM M2N32 WS PRO TPM connector 1 SERIRQ X X M2N32 WS PRO GND X X LAD2 LAD1 GND CK_33M_TPM LFRAMEn LRESETn LAD3 +3.3V LAD0 +3.3V X GND LPC_PD# This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. The TPM module is purchased separately.
PAGE 65
15. System panel connector (20-pin PANEL) This connector supports several chassis-mounted functions. +5V Ground Ground Speaker SPEAKER PLED- PLED+ PLED M2N32 WS PRO RESET IDE_LED ® Reset Ground PWR Ground IDE_LED+ IDE_LED- PANEL PWRSW * Requires an ATX power supply.
PAGE 66
2-40 Chapter 2: Hardware information
PAGE 67
This chapter describes the power up sequence and ways of shutting down the system.
PAGE 68
Chapter summary 3.1 3.2 3 Starting up for the first time......................................................... 3-1 Powering off the computer...........................................................
PAGE 69
3.1 Starting up for the first time 1. After making all the connections, replace the system case cover. 3. Connect the power cord to the power connector at the back of the system chassis. 2. 4. 5. Be sure that all switches are off. Connect the power cord to a power outlet that is equipped with a surge protector. Turn on the devices in the following order: a. Monitor c. System power b. 6. 7.
PAGE 70
3.2 Powering off the computer 3.2.1 Using the OS shut down function If you are using Windows® 2000: 1. 2. 3. Click the Start button then click Shut Down... Make sure that the Shut Down option button is selected, then click the OK button to shut down the computer. The power supply should turn off after Windows® shuts down. If you are using Windows® XP: 1. Click the Start button then select Turn Off Computer. 3. The power supply should turn off after Windows® shuts down. 2.
PAGE 71
This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
PAGE 72
Chapter summary 4 4.1 Managing and updating your BIOS............................................. 4-1 4.3 Main menu................................................................................... 4-14 4.2 4.4 4.5 4.6 4.7 4.8 BIOS setup program................................................................... 4-10 Advanced menu.......................................................................... 4-19 Power menu.................................................................................
PAGE 73
4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS Update (Updates the BIOS in Windows® environment.) 3. Award BIOS Flash Utility (Updates the BIOS in DOS mode using a bootable floppy disk.) ASUS EZ Flash 2 (Updates the BIOS in DOS using a floppy disk or the motherboard support CD.) 2.
PAGE 74
Quit all Windows® applications before you update the BIOS using this utility. Updating the BIOS through the Internet To update the BIOS through the Internet: 4- 1. Launch the ASUS Update utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIOS from the Internet option from the drop‑down menu, then click Next. 3. Select the ASUS FTP site nearest you to avoid network traffic, or click Auto Select.
PAGE 75
4. 5. From the FTP site, select the BIOS version that you wish to download. Click Next. Follow the screen instructions to complete the update process. The ASUS Update utility is capable of updating itself through the Internet. Always update the utility to avail all its features. Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: 1. 2. 3. 4. Launch the ASUS Update utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate.
PAGE 76
4.1.2 1. Creating a bootable floppy disk Do either one of the following to create a bootable floppy disk. DOS environment a. Insert a 1.44MB floppy disk into the drive. b. At the DOS prompt, type format A:/S then press . Windows® XP environment a. Insert a 1.44 MB floppy disk to the floppy disk drive. b. Click Start from the Windows® desktop, then select My Computer. c. Select the 3 1/2 Floppy Drive icon. d. Click File from the menu, then select Format.
PAGE 77
4.1.3 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS‑based utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing + during the Power-On Self Tests (POST). To update the BIOS using EZ Flash 2: 1. 2. 3. Visit the ASUS website (www.asus.com) to download the latest BIOS file for the motherboard.
PAGE 78
4.1.4 Updating the BIOS The Basic Input/Output System (BIOS) can be updated using the AwardBIOS Flash Utility. Follow these instructions to update the BIOS using this utility. 1. Download the latest BIOS file from the ASUS web site. Rename the file to M2N32-WS.BIN and save it to a floppy disk, CD ROM or a USB flash disk in FAT 16/12 format. Save only the updated BIOS file in the floppy disk to avoid loading the wrong BIOS file. 2. 3. 4. 5. 6. Copy the AwardBIOS Flash Utility (awdflash.
PAGE 79
7. 8. Press when the utility prompts you to save the current BIOS file. The following screen appears. The utility verifies the BIOS file in the floppy disk, CD ROM or a USB flash disk and starts flashing the BIOS file. AwardBIOS Flash Utility for ASUS V1.14 (C) Phoenix Technologies Ltd. All Rights Reserved For C51XEMCP55PXE-M2N32-WS-00 Flash Type - Unknown Flash File Name to Program: DATE:04/13/2006 0107.
PAGE 80
4.1.5 Saving the current BIOS file You can use the AwardBIOS Flash Utility to save the current BIOS file. You can load the current BIOS file when the BIOS file gets corrupted during the flashing process. Make sure that the floppy disk, CD ROM or a USB flash disk has enough disk space to save the file. To save the current BIOS file using the AwardBIOS Flash Utility: 1. 2. Follow steps 1 to 6 of the previous section. Press when the utility prompts you to save the current BIOS file.
PAGE 81
4.1.6 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD or the floppy disk that contains the updated BIOS file. Prepare the motherboard support CD or the floppy disk containing the updated motherboard BIOS before using this utility.
PAGE 82
4.2 BIOS setup program This motherboard supports a programmable Low-Pin Count (LPC) chip that you can update using the provided utility described in section “4.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to“Run Setup.” This section explains how to configure your system using this utility. Even if you are not prompted to use the Setup program, you can change the configuration of your computer in the future.
PAGE 83
4.2.1 BIOS menu screen Menu items Main Menu bar Advanced Power Configuration fields Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit System Time System Date Language 15 : 30 : 36 Thu, Apr 6 2006 [English] Legacy Diskette A: [1.44M, 3.5 in.
PAGE 84
4.2.3 Legend bar At the bottom of the Setup screen is a legend bar. The keys in the legend bar allow you to navigate through the various setup menus. The following table lists the keys found in the legend bar with their corresponding functions.
PAGE 85
4.2.7 Pop-up window Select a menu item then press to display a pop-up window with the configuration options for that item. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit System Time System Date Language 15 : 30 : 36 Thu, Apr 6 2006 [English] Legacy Diskette A: [1.44M, 3.5 in.] A: Primary IDE Master Legacy Diskette [ST321122A] Primary IDE Slave [ASUS CDS520/A] Disabled ..... [ ] SATA 1 720K , 3.5 in. ..... [ ] SATA 2 1.44M, 3.5 in. .....
PAGE 86
4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. Refer to section “4.2.1 BIOS menu screen” for information on the menu screen items and how to navigate through them. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit System Time System Date Language 15 : 30 : 36 Thu, Apr 6 2006 [English] Legacy Diskette A: [1.44M, 3.5 in.
PAGE 87
4.3.5 Primary IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press to display the IDE device information.
PAGE 88
Access Mode [Auto] The default [Auto] allows automatic detection of an IDE hard disk drive. Select [CHS] for this item if you set the IDE Primary Master/Slave to [Manual]. Configuration options: [CHS] [LBA] [Large] [Auto] Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. Capacity Displays the auto-detected hard disk capacity.
PAGE 89
4.3.6 SATA 1-6 While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press to display the SATA device information.
PAGE 90
Head Shows the number of the hard disk read/write heads. This item is not configurable. Landing Zone Shows the number of landing zone per track. This item is not configurable. Sector Shows the number of sectors per track. This item is not configurable. After entering the IDE hard disk drive information into BIOS, use a disk utility, such as FDISK, to partition and format new IDE hard disk drives. This is necessary so that you can write or read data from the hard disk.
PAGE 91
4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit Select Menu JumperFree Configuration AI NET2 PEG Link Mode Item Specific Help Adjust system frequency/ voltage.
PAGE 92
Standard Loads the standard settings for the system. AI Overclock Loads overclocking profiles with optimal parameters for stability when overclocking. AI N.O.S. The ASUS Non-delay Overclocking System feature intelligently determines the system load and automatically boosts the performance for the most demanding tasks. The following item becomes user-configurable when you set AI Tuning to [AI Overclocking]. Overclock Options [Disabled] Allows you to set the overclocking options.
PAGE 93
DDR2 Voltage Control [Auto] Allows you to set the operating DDR2 voltage. Configuration options: [Auto] [1.800V] [1.825V] [1.850V] ~ [2.500V] CPU Multiplier [Auto] Allows you to set the operating CPU multiplier. The configuration options may vary depending on the type of CPU installed. Configuration options: [Auto] [5x] [6x] ~ [13x] CPU Voltage [Auto] Allows you to set the operating CPU voltage. Configuration options: [Auto] [1.400v] [1.375v] ...[0.
PAGE 94
Vcore Offset Voltage [+ 50mV] Allows you to set the Vcore offset voltage. Configuration options: [+ 50mV] [+100mV] [+150mV] [+200mV] P_+1.2V HT Voltage [+1.250V] Allows you to set the P_+1.2V HT voltage. Configuration options: [+1.250V] [+1.275V] [+1.300V]...[+1.425V] P_+1.3V HT MCP Voltage [Auto] Allows you to set the P_+1.3V HT MCP voltage. Configuration options: [Auto] [+1.300V] [+1.325V] [+1.350V]...[+1.500V] P_+1.5VSB Voltage [+1.500V] Allows you to set the P_+1.5VSB voltage.
PAGE 95
4.4.3 PEG Link Mode Phoenix-Award BIOS CMOS Setup Utility Advanced Select Menu PEG Link Mode PEG Link Mode [Auto] Item Specific Help Enhance performance on PCIE serial graphic card. PEG Link Mode [Auto] Allows you to enhance the performance of your PCI Express graphics card. Configuration options: [Auto] [Disabled] [Normal] [Fast] [Faster] Setting to [Fast] or [Faster] may cause your system to be unstable. If this happens, revert to the default setting [Auto]. 4.4.
PAGE 96
Memory Clock Frequency [Auto] Sets the memory clock frequency. Configuration options: [Auto] [DDR2 400] [DDR2 533] [DDR2 667] [RSVD] [DDR2 800] Tcl [Auto] Configuration options: [Auto][3] [4] [5] [6] Trcd [Auto] Configuration options: [Auto] [3] [4] [5] [6] Trp [Auto] Configuration options: [Auto] [3] [4] [5] [6] Tras [Auto] Configuration options: [Auto] [5] [6] [7] ~ [18] 1T/2T Memory Timing [Auto] Sets the memory timing.
PAGE 97
Trfc Configuration options: [Auto] [0] [1] [2] [3] [4] DRAM Termination Configuration options: [Auto] [Disabled] [75 ohms] [150 ohms] [50 ohms] Max Async Latency Configuration options: [Auto] [0 ns] [1 ns] [2 ns] [3 ns]...
PAGE 98
Address/Command Setup Time Configuration options: [Auto] [1/2 MEMCLK] [1 MEMCLK] Read DQS Timing Control Configuration options: [Auto] [No delay] [1/96 MEMCLK delay] [2/96 MEMCLK delay] [3/96 MEMCLK delay] [4/96 MEMCLK delay] ...[47/96] Write Data Timing Control Configuration options: [Auto] [No delay] [1/96 MEMCLK delay] [2/96 MEMCLK delay] [3/96 MEMCLK delay] [4/96 MEMCLK delay] ...
PAGE 99
4.4.
PAGE 100
CPU Spread Spectrum [Center] Enables or disables Spread Spectrum for CPU. Configuration options: [Disabled] [Center] [Down] PCIE Spread Spectrum [Disabled] Enables or disables Spread Spectrum for PCI Express. Configuration options: [Disabled] [Enabled] SATA Spread Spectrum [Disabled] Enables or disables Spread Spectrum for SATA. Configuration options: [Disabled] [Enabled] HT Spread Spectrum [Disabled] Disables or sets the spread Spectrum for Hyper Transport.
PAGE 101
4.4.6 PCIPnP Phoenix-Award BIOS CMOS Setup Utility Advanced PCIPnP Select Menu Plug & Play O/S [No] Item Specific Help Resources Controlled By x IRQ Resources [Auto] Select Yes if you are using a Plug and Play capable operating system. Select No if you need the BIOS to configure non-boot devices. Plug & Play O/S [No] When set to [No], the BIOS configures all the devices in the system.
PAGE 102
4.4.
PAGE 103
Serial-ATA Configuration This sub-menu allows you to change Serial ATA settings. Select an item then press to edit.
PAGE 104
Onboard 1394 Controller [Enabled] Allows you to disable or enable the onboard 1394 device support. Configuration options: [Disabled] [Enabled] Onboard 1st/2nd Nvidia LAN [Enabled] Enables or disables the onboard NVIDIA® LAN controller. Configuration options: [Disabled] [Enabled] OnBoard nVidia LAN Boot ROM [Disabled] Allows you to enable or disable the onboard LAN boot ROM.
PAGE 105
Parallel Port Mode [Bi-Directional] Allows you to select the Parallel Port mode. Configuration options: [Normal] [EPP] [ECP] [Bi-Directional] The “ECP Mode Use DMA” item becomes user-configurable when the “ Parallel Port Mode” item is set to [ECP] or [Bi-Directional] ECP Mode Use DMA [3] Allows selection of ECP Mode.
PAGE 106
4.5 Power menu The Power menu items allow you to change the settings for the Advanced Configuration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press to display the configuration options. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit ACPI Suspend Type ACPI APIC support APM Configuration Hardware Monitor F1:Help ESC: Exit 4.5.
PAGE 107
4.5.
PAGE 108
Power On By RTC Alarm [Disabled] Allows you to enable or disable RTC to generate a wake event. When this item is set to Enabled, the items Date of Month Alarm and Time (hh:mm:ss) Alarm items become user-configurable with set values. Configuration options: [Disabled] [Enabled] Date of Month Alarm [Disabled] To set the date of alarm, highlight this item and press to display the Date of Month Alarm pop-up menu. Key-in a value within the specified range then press .
PAGE 109
4.5.4 Hardware Monitor The items in this sub-menu displays the hardware monitor values automatically detected by the BIOS. It also allows you to change CPU Q-Fan feature-related parameters. Select an item then press to display the configuration options. Power Phoenix-Award BIOS CMOS Setup Utility Hardware Monitor Q-Fan Controller Vcore Voltage 3.
PAGE 110
4.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press to display the sub-menu. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit Select Menu Boot Device Priority Removable Drives Hard Disk Drives CDROM Drives Boot Settings Configuration Security F1:Help ESC: Exit 4.6.
PAGE 111
4.6.2 Removable Drives Phoenix-Award BIOS CMOS Setup Utility Boot Removable Drives 1. Floppy Disks Select Menu Item Specific Help 1. Floppy Disks Allows you to assign a removable drive attached to the system. 4.6.3 Hard Disk Drives Phoenix-Award BIOS CMOS Setup Utility Boot Hard Disk Drives 1. 1st Master: XXXXXXXXX Select Menu Item Specific Help 1. SATA 1: XXXXXXXXX Allows you to assign hard disk drives attached to the system. 4.6.
PAGE 112
4.6.
PAGE 113
Typematic Rate (Chars/Sec) [6] Allows you to select the rate at which a character repeats when you hold a key. Configuration options: [6] [8] [10] [12] [15] [20] [24] [30] Typematic Delay (Msec) [250] Allows you to set the delay before keystrokes begin to repeat. Configuration options: [250] [500] [750] [1000] OS Select for DRAM > 64MB [Non-OS2] Set this item to OS2 only when you are running on an OS/2 operating system with an installed RAM of greater than 64 KB.
PAGE 114
3. When prompted, confirm the password by typing the exact characters again, then press . The password field setting is changed to Set. To clear the password: 1. Select the password field and press twice. The following message appears: PASSWORD DISABLED !!! Press any key to continue... 2. Press any key to continue. The password field setting is changed to Clear. A note about passwords The Supervisor password is required to enter the BIOS Setup program preventing unauthorized access.
PAGE 115
4.7 Tools menu The Tools menu items allow you to configure options for special functions. Select an item then press to display the sub-menu. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit ASUS Music Alarm ASUS O.C. Profile ASUS EZ Flash 2 F1:Help ESC: Exit 4.7.
PAGE 116
Alarm Date: Sunday/Monday/Tuesday/Wednesday/Thursday/Friday/ Saturday [Enabled] Allows you to enable or disable the alarm for a particular day. Configuration options: [Disabled] [Enabled] Alarm Time (hh:mm) 0 : 0 Allows you to set the alarm time. Press to select the field, then use <+> or <-> to change the value.
PAGE 117
4.7.2 ASUS O.C. Profile This item allows you to store or load multiple BIOS settings. Phoenix-Award BIOS CMOS Setup Utility Tools ASUS O.C. Profile Load BIOS Profile Save BIOS Profile Select Menu Item Specific Help Press [Enter] to select. Load BIOS Profile Phoenix-Award BIOS CMOS Setup Utility Tools Load BIOS Profile Load from Profile 1 Load from Profile 2 Load from File Select Menu Item Specific Help Load BIOS Profile from Profile 1.
PAGE 118
Save BIOS Profile Phoenix-Award BIOS CMOS Setup Utility Tools Save BIOS Profile Select Menu Save to Profile 1 Save to Profile 2 Save to File Item Specific Help Save current BIOS Profile to Profile 1. Save to Profile 1/2 Allows you to save the current BIOS file to the BIOS Flash. Press to save the file. Save to File Allows you to save the current BIOS file to the hard disk/floppy disk/USB flash disk with the FAT32/16/12 format. Follow the instructions below to save the BIOS file. 1.
PAGE 119
4.7.3 ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. Please see page 4-5, section 4.1.3 for details.
PAGE 120
4.8 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit Exit & Save Changes Exit & Discard Changes Load Setup Default Discard Changes F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu Select Menu Item Specific Help This option save data to CMOS and exiting the setup menu.
PAGE 121
This chapter describes the contents of the support CD that comes with the motherboard package.
PAGE 122
Chapter summary 5.1 5.2 5 Installing an operating system...................................................... -1 Support CD information.................................................................
PAGE 123
5.1 Installing an operating system This motherboard supports Windows® 2000/2003 Server/XP/64-bit XP operating systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. 5.2 • Motherboard settings and hardware options vary. Use the setup procedures presented in this chapter for reference only. Refer to your OS documentation for detailed information.
PAGE 124
5.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Installation Wizard for Drivers Launches the ASUS InstallAll driver installation wizard. Nvidia Chipset Driver Program Installs the NVIDIA® Chipset drivers for the NVIDIA® nForce™ 4 SLI chipset. AMD Cool ‘n’ Quiet Driver Installs the AMD Cool ‘n’ Quiet™ technology driver.
PAGE 125
5.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll - Installation Wizard for Utilities Launches the ASUS InstallAll utilities installation wizard. ASUS Cool ‘n’ Quiet Utility Installs the AMD Cool ‘n’ Quiet™ software.
PAGE 126
ASUS PC Probe II This smart utility monitors the fan speed, CPU temperature, and system voltages, and alerts you of any detected problems. This utility helps you keep your computer in healthy operating condition. ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in Windows® environment. This utility requires an Internet connection either through a network or an Internet Service Provider (ISP). Adobe Acrobat Reader V7.
PAGE 127
5.2.4 Make Disk menu The Make Disk menu contains items to create the NVIDIA® nForce™ 4 or Silicon Image SATA/PATA RAID driver disk. Make nVidia 32bit/64bit SATA RAID Driver Allows you to create an NVIDIA® Serial ATA RAID driver disk for a 32-bit/64-bit system. Marvell 614x RAID Driver Disk Allows you to create a Marvell 614x RAID driver disk.
PAGE 128
5.2.5 Manuals menu The Manuals menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most user manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening a user manual file.
PAGE 129
5.2.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. 5.2.7 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support CD. Click an icon to display the specified information. Motherboard Info Displays the general specifications of the motherboard.
PAGE 130
Browse this CD Displays the support CD contents in graphical format. Technical support Form Displays the ASUS Technical Support Request Form that you have to fill out when requesting technical support.