Owner's manual

2-12 ASUS M3N78-AM
The following item appears only when the CPU Overclocking item is set to [Manual].
CPU Frequency [200]
Allows you to set the CPU/HT Reference Clock. The valid value is between 200 MHz
and 550 MHz.
The following item appears only when the CPU Overclocking item is set to [Overclock
Prole].
Overcloking Options [Auto]
Allows you to set the overclocking options. Conguration options: [Auto] [Overclock
3%] [Overclock 5%] [Overclock 7%] [Test Mode]
PCIE Overclocking [Auto]
Allows you to select the PCIE Overclocking. Conguration options: [Auto] [Manual]
The following item appears only when the PCIE Overclocking item is set to [Manual].
PCIE Frequency [100]
Allows you to set the PCIE frequency. The valid value is between 100 and 150.
Processor Frequency Multiplier [Auto]
Allows you to select the processor frequency. Conguration options: [Auto] [x4.0 800 MHz]
[x5.0 1000 MHz] [x6.0 1200 MHz] [x7.0 1400 MHz] [x8.0 1600 MHz] [x9.0 1800 MHz]
Processor Voltage [Standard]
Allows you to select the processor voltage or set it to auto for safe mode.
Conguration options: [Power Saving Mode] [Standard] [+ 50mv] [+ 100mv]
HyperTransport Speed [Auto]
The Hyper Transport link will run at this speed if it is slower than or equal to the system clock
and the board is capable. Conguration options: [200 Mhz] [400 Mhz] [600 Mhz] [800 Mhz]
[1 Ghz] [Auto]
GPU Overclocking [Auto]
Allows you to select the GPU Overclocking. Conguration options: [Auto] [Manual]
The following item appears only when the GPU Overclocking item is set to [Manual].
GPU Frequency [500]
Allows you to set the GPU engine clock. The valid value is between 500 and 999.
Shader Frequency [1200]
Allows you to enter an integer value from 1000MHz to 2000MHz to overclock for
shader.