Owner's manual

Chapter 2: BIOS setup 2-21

2.6 Boot menu

The Boot menu items allow you to change the system boot options. Select an item then

press <Enter> to display the submenu.

Select Screen

Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit

Boot Settings Conguration

Security

Species the Boot

Device Priority

sequence.

A virtual oppy disk

drive (Floppy Drive B:)

may appear when you set

the CD-ROM drive as the

rst boot device.

BIOS SETUP UTILITY

Main Advanced Power Boot Tools Exit

Boot Device Priority

Boot Settings

2.6.1 Boot Device Priority

1st ~ xxth Boot Device

These items specify the boot device priority sequence from the available devices. The

number of device items that appears on the screen depends on the number of devices

installed in the system. Conguration options: [1st FLOPPY DRIVE] [Hard Drive] [ATAPI CD-

ROM ] [Disabled]

Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.

Add On ROM Display Mode [Force BIOS]

Sets the display mode for option ROM. Conguration options: [Force BIOS] [Keep Current]

2.6.2 Boot Settings Conguration

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to

decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the

POST items. Conguration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature. Conguration

options: [Disabled] [Enabled]