Specifications

3-14 Chapter 3: BIOS setup
Chapter 3
3.5.8 Memory Conguration
Ai Tweaker
Memory Conguration
Bank Interleaving [Auto]
Channel Interleaving [XOR of Address bit]
MemClk Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
DCT Unganged Mode [Auto]
Power Down Enable [Disabled]
Enable Bank Memory
Interleavng.
Bank Interleaving [Auto]
Conguration options: [Disabled] [Auto]
Channel Interleaving [XOR of Address bit]
Conguration options: [Disabled] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
MemClk Tristate C3/ATLVID [Disabled]
Conguration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Conguration options: [Disabled] [Enabled]
DRAM Unganged Mode [Auto]
Conguration options: [Auto] [Enabled] [Disabled]
Power Down Enable [Disabled]
Enables or disables the DDR power down mode.
Conguration options: [Disabled] [Enabled]
Power Down Mode [Channel]
Allows you to set the DDR power down mode. This item appears only when you enable
the previous item. Conguration options: [Channel] [Chip Select]
The following two items appear only when you set the AI Overclocking Tuner item to
[Manual].
3.5.7 HT Link Speed [Auto]
Allows you to select the HyperTransport link speed.
Conguration options: [Auto] [200MHz] [400MHz] [600MHz] [800MHz] [1 GHz] [1.2 GHz]
[1.4 GHz] [1.6 GHz] [1.8 GHz]