Owner's manual

3-32 Chapter 3: BIOS setup
Chapter 3
Restore On AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On From S5 By PME# [Disabled]
[Disabled] Disables the PME to wake up from S5 by PCI/PCIE devices.
[Enabled] Allows you to turn on the system through a PCI/PCIE LAN or modem card.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Power On From S5 By Ring [Disabled]
[Disabled] Disables to power up the computer when the external modem receives a
call while the computer is in Soft-off mode.
[Enabled] The computer could be powered up when the external modem receives a
call while the computer is in Soft-off mode.
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the rst try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By PS/2 Keyboard [Disabled]
Enables or disables PS/2 keyboard to generate a wake event. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead. Conguration options: [Disabled]
[Space Bar] [Power Key] [Ctrl-Esc]
Power On From S5 By RTC Alarm [Disabled]
[Disabled] Disables RTC to generate a wake event.
[Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and System
Time will become user-congurable with set values.
3.7.4 APM Conguration
E5888_M4A88TD-V EVO-USB3_Content32 32 5/26/10 3:45:47 PM