E5889_M4A88TD-V EVO_Contents V2.
E5889 Second Edition (V2) May 2010 Copyright © 2010 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”).
Contents Notices ....................................................................................................................... vii Safety information..................................................................................................... viii About this guide.......................................................................................................... ix M4A88TD-V EVO specifications summary................................................................
Contents 2.8 Connectors................................................................................................ 2-24 2.8.1 Rear panel connectors............................................................... 2-24 2.8.2 Audio I/O connections................................................................ 2-27 2.8.3 Internal connectors.................................................................... 2-29 2.8.4. ASUS Q-Connector (system panel)...........................................
Contents 3.6 3.7 3.8 3.9 3.10 3.5.10 DRAM Driving Configuration...................................................... 3-20 3.5.11 CPU & NB Voltage Mode........................................................... 3-20 3.5.12 CPU VDDA Voltage.................................................................... 3-21 3.5.13 DRAM Voltage........................................................................... 3-21 3.5.14 HT Voltage...................................................................
Contents Chapter 4: 4.1 4.2 4.3 Software support Installing an operating system.................................................................. 4-1 Support DVD information........................................................................... 4-1 4.2.1 Running the support DVD............................................................ 4-1 4.2.2 Obtaining the software manuals.................................................. 4-2 Software information...............................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
M4A88TD-V EVO specifications summary CPU AMD® Socket AM3 for AMD® Phenom™ II / Athlon™ II / Sempron™ 100 Series Processors AMD® 140W CPU Support AMD® Cool ‘n’ Quiet™� ���������� Technology Supports 45nm CPU Chipset AMD® 880G / SB850 System bus Up to 5200 MT/s; HyperTransport™ 3.0 Memory 4 x DIMM, max. 16GB, DDR3 2000 (O.C.) / 1333 / 1066 MHz, ECC / non-ECC, un-buffered memory Dual channel memory architecture * AMD AM3 100 and 200 Series CPU support up to DDR3 1066 MHz.
M4A88TD-V EVO specifications summary IEEE 1394 VIA® VT6330 controller supports 2 IEEE 1394a ports (one at midboard, one at the back panel) ASUS unique features ASUS Xtreme Design ASUS Hybrid Processor – TurboV EVO - TurboV, Auto Tuning, CPU Level UP and GPU Boost ASUS Hybrid OS – Express Gate ASUS Hybrid Switches - Turbo Key II - Core Unlocker ASUS Power Solutions - ASUS 8+2 Phase Power Design - ASUS EPU ASUS Exclusive Features - MemOK! - Anti-Surge Protection ASUS Quiet Thermal Solutions - A
M4A88TD-V EVO specifications summary Back panel I/O ports 1 x PS/2 keyboard / mouse combo port 1 x HDMI Out port 1 x DVI-D Out port 1 x D-Sub port 1 x Optical S/PDIF Out port 1 x eSATA port 1 x IEEE 1394a port 1 x LAN (RJ-45) port 6 x USB 2.0 ports 8-channel audio I/O ports Internal connectors / switches / buttons 4 x USB 2.0 connectors support additional 8 USB 2.0 ports 1 x IDE connector 5 x SATA 6.
xiv E5889_M4A88TD-V EVO_Contents V2.
Chapter 1 Chapter 1: Product introduction 1.1 Welcome! Thank you for buying an ASUS® M4A88TD-V EVO motherboard! Chapter 1 The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents Check your motherboard package for the following items.
1.3 Special features 1.3.1 Product highlights Chapter 1 AMD® Phenom™ II / Athlon™ II / Sempron™ 100 Series Processors (socket AM3) This motherboard supports AMD® AM3 multi-core processors with unique L3 cache and delivers better overclocking capabilities with less power consumption. It features dual-channel DDR3 1333 memory support and accelerates data transfer rate up to 5200MT/s via HyperTransport™ 3.0 based system bus. This motherboard also supports AMD® CPUs in the 45nm manufacturing process.
GPU Boost 1.3.3 Chapter 1 GPU Boost overclocks the integrated GPU in real time for the best graphics performance. User-friendly UI facilitates flexible frequency and voltage adjustments. Its ability to deliver multiple overclocking profiles also provides rapid and stable system-level upgrades. ASUS Xtreme Design—Hybrid Switches* Turbo Key II Enjoy superb performance by auto-tuning your processor to an extreme yet stable state.
Anti-Surge Protection Chapter 1 This special design protects expensive devices and the motherboard from damage caused by power surges from switching power supply unit (PSU). ASUS Quiet Thermal Solutions ASUS Quiet Thermal solution makes system more stable and enhances the overclocking capability. Fanless Design: stylish heatsink solution The brand-new 2-color Wing Heatsink features a 0-dB thermal solution that offers users a noiseless PC environment.
Chapter 2 Chapter 2: Hardware information 2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
2.2 Motherboard overview 2.2.1 Motherboard layout 1 2 3 2 4 24.4cm(9.6in) CPU_FAN KB_USB56 2 SPDIFO_ HDMI 7 Turbo Key II O2LED1 Core Unlocker 6 8 MemOK! 9 10 1 30.5cm(12.
Layout contents Connectors/Jumpers/Slots Page 1. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) 2-35 2. CPU, chassis, and power fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN, 3-pin PWR_FAN) 2-33 3. AM3 CPU Socket 2-5 4. DDR3 DIMM slots 2-10 5. Turbo Key II LED (O2LED2) 2-39 6. Turbo Key II switch 2-21 7. Core Unlocker LED (O2LED1) 2-39 8. Core Unlocker switch 2-23 9. MemOK! switch 2-22 10. DRAM LED (DRAM_LED) 2-38 11. AMD® SB850 Serial ATA 6.
2.2.3 Placement direction When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below. 2.2.4 Screw holes Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
2.3 Central Processing Unit (CPU) The motherboard comes with an AM3 socket designed for AMD® Phenom™ II / Athlon™ II / Sempron™ 100 Series Processors. Ensure that all power cables are unplugged before installing the CPU. The AM3 socket has a different pinout from the 940-pin socket designed for the AMD Opteron processor. Ensure that you use a CPU designed for the AM3 socket. The CPU fits in only one correct orientation.
3. Position the CPU above the socket such that the CPU corner with the gold triangle matches the socket corner with a small triangle. 4. Carefully insert the CPU into the socket until it fits in place. Gold triangle Small triangle Chapter 2 5. When the CPU is in place, push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked. 6.
2.3.2 Installing the CPU heatsink and fan The AMD® AM3 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. Ensure that you use only AMD-certified heatsink and fan assembly. To install the CPU heatsink and fan: Place the heatsink on top of the installed CPU, ensuring that the heatsink fits properly on the retention module base. • The retention module base is already installed on the motherboard upon purchase.
Chapter 2 2. Attach one end of the retention bracket to the retention module base. 3. Align the other end of the retention bracket to the retention module base. A clicking sound denotes that the retention bracket is in place. Ensure that the fan and heatsink assembly perfectly fits the retention mechanism module base, otherwise you cannot snap the retention bracket in place. 4. Push down the retention bracket lock on the retention mechanism to secure the heatsink and fan to the module base.
5. When the fan and heatsink assembly is in place, connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. CPU FAN PWM CPU FAN IN CPU FAN PWR GND CPU_FAN Chapter 2 M4A88TD-V EVO M4A88TD-V EVO CPU fan connector • Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. • This connector is backward compatible with old 3-pin CPU fan. ASUS M4A88TD-V EVO E5889_M4A88TD-V EVO_Contents V2.
2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for better performance with less power consumption.
2.4.2 Memory configurations • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • We recommend that you install the memory modules from the blue slots for better overclocking capability. • Always install DIMMs with the same CAS latency.
M4A88TD-V EVO Motherboard Qualified Vendors Lists (QVL) DDR3 2000 (O.C.) MHz capability DIMM support Size SS/DS Chip Brand Chip No. Timing Voltage KINGSTON KHX2000C8D3T1K3/3GX(XMP) 3072MB(kit of 3) SS - - - 1.65V • KINGSTON KHX2000C9D3T1K3/3GX(XMP) 3072MB(kit of 3) SS - - - 1.65V • KINGSTON KHX2000C8D3T1K3/6GX(XMP) 6144MB(Kit of 3 ) DS - - - 1.65V • Transcend 4096MB(Kit of 2) DS - - 9-9-9-24 1.65V • Vendor Part No.
DDR3 1600 (O.C.) MHz capability Size G.SkiLL F3-12800CL8T-6GBPI(XMP) 6144MB(Kit of 3 ) DS - - 8-8-8-21 1.6-1.65V • G.SKILL F3-12800CL9T-6GBNQ(XMP) 6144MB(Kit of 3) DS - - 9-9-9-24 1.5V~1.
DDR3 1333MHz capability DIMM support 1 DIMM 2 DIMM 4 DIMM SS/ Chip DS Brand Chip No. Timing Voltage F3-10600CL7D-2GBPI(XMP) 1024MB SS G.SKILL - - - • • • F3-10600CL8D-2GBHK 1024MB SS G.SKILL - - - • • • G.SKILL F3-10600CL9D-2GBPK 1024MB SS G.SKILL - - - • • • G.SKILL F3-10666CL7T-3GBPK 3072MB(Kit of 3) SS - - 7-7-7-18 1.5~1.6V • • • G.SKILL F3-10666CL9T-3GBNQ 3072MB(Kit of 3) SS - - 9-9-9-24 1.5~1.6V • • • G.
DDR3 1333MHz capability DIMM support 1 DIMM 2 DIMM 4 DIMM Vendor Part No. Size SS/ Chip DS Brand Chip No.
2.4.3 Installing a DIMM Ensure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. DIMM notch 1. Unlock a DIMM socket by pressing the retaining clips outward. 2. Align a DIMM on the socket such that the notch on the DIMM matches the DIMM slot key on the socket.
2.5 Expansion slots In the future, you may need to install expansion cards. The following subsections describe the slots and the expansion cards that they support. Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 2.5.1 Installing an expansion card 1. Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card. 2.
2.5.
2.5.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. Refer to the figure below for the location of the slots. 2.5.5 PCI Express 2.0 x1 slot This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply with the PCI Express specifications. Refer to the figure below for the location of the slots. 2.5.6 PCI Express 2.0 x16 slots Chapter 2 This motherboard has two PCI Express 2.
VGA configuration PCI Express operating mode PCIe x16_1 PCIe x16_2 Single VGA/PCIe card x16 (Recommended for single VGA card) N/A Dual VGA/PCIe card x16 x4 Chapter 2 2.6 • In single VGA card mode, use first the PCIe 2.0 x16_1 slot (blue) for a PCI Express x16 graphics card to get better performance. • We recommend that you provide sufficient power when running CrossFireX™ mode. See page 2-35 for details.
2.7 • If the steps above do not help, remove the onboard battery and move the jumper again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery. • You do not need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values.
2. MemOK! switch Installing DIMMs that are incompatible with the motherboard may cause system boot failure, and the DRAM_LED near the MemOK! switch lights continuously. Press and hold the MemOK! switch until the DRAM_LED starts blinking to begin automatic memory compatibility tuning for successful boot. M4A88TD-V EVO Chapter 2 M4A88TD-V EVO MemOK! switch • Refer to section 2.9 Onboard LEDs for the exact location of the DRAM_LED. • The DRAM_LED also lights when the DIMM is not properly installed.
3. Core Unlocker switch This switch allows you to unlock the extra cores of your CPU. For ensuring the system performance, turn the switch setting to Enable when the system is powered off. Chapter 2 M4A88TD-V EVO M4A88TD-V EVO Core Unclocker switch • The O2LED1 LED near the Core Unlocker switch lights when the switch setting is turned to Enable. Refer to section 2.9 Onboard LEDs for the exact location of the O2LED1 LED.
2.8 Connectors 2.8.1 Rear panel connectors Chapter 2 Rear panel connectors 1. PS/2 keyboard/Mouse Combo port (purple) 7. HDMI Out port*** 2. Optical S/PDIF Out port 8. DVI-D Out pot 3. D-Sub Out port 9. IEEE 1394a port 4. USB 2.0 ports 3 and 4 10. External SATA port 5. LAN (RJ-45) port* 11. USB 2.0 ports 1 and 2 6. USB 2.0 ports 5 and 6 12. Audio I/O ports** *and **: Refer to the tables on the next page for LAN port and audio port definitions.
* LAN port LED indications ACT/LINK SPEED LED LED Activity Link LED Speed LED Status Description Status Description OFF No link OFF 10 Mbps connection ORANGE Linked ORANGE 100 Mbps connection BLINKING Data activity GREEN 1 Gbps connection LAN port ** Audio 2, 4, 6, or 8-channel configuration Headset 2-channel 4-channel 6-channel 8-channel Light Blue Line In Line In Line In Line In Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out Pink Mic In Mic In Mic
Troubleshooting on HDTV overscaling or underscaling: If your desktop is extending beyond the viewable display area or the desktop or image is not filling the entire display area while using the onboard HDMI out port and the HDMI cable, you can resize the desktop appearing on your HDTV screen. To resize your HDTV desktop: 1. Install AMD Chipset Driver from the motherboard support DVD. 2. Right-click the desktop and select ATI CATALYST(R) Control Center. 3.
2.8.2 Audio I/O connections Audio I/O ports Chapter 2 Connect to Headphone and Mic Connect to Stereo / 2.1-channel Speakers ASUS M4A88TD-V EVO E5889_M4A88TD-V EVO_Contents V2.
Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Chapter 2 Connect to 7.1 channel Speakers 2-28 E5889_M4A88TD-V EVO_Contents V2.
2.8.3 1. Internal connectors IDE connector (40-1 pin PRI_EIDE) The onboard IDE connector is for the Ultra DMA 133/100/66 signal cable. There are three connectors on each Ultra DMA 133/100/66 signal cable: blue, black, and gray. Connect the blue connector to the motherboard’s IDE connector, then select one of the following modes to configure your device. PRI_EIDE Chapter 2 PIN1 M4A88TD-V EVO NOTE:Orient the red markings on the IDE ribbon cable to PIN 1.
2. AMD® SB850 Serial ATA Serial ATA 6.0 Gb/s connectors (7-pin SATA 1/2/3/5/6) These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 5, or RAID 10 configuration through the onboard AMD® SB850 controller.
3. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. COM1 PIN 1 Chapter 2 M4A88TD-V EVO M4A88TD-V EVO Serial port (COM1) connector The COM module is purchased separately. 4. IEEE 1394a port connector (10-1 pin IE1394_1) This connector is for an IEEE 1394a port.
5. USB connectors (10-1 pin USB78; USB910; USB1112; USB1314) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.
6. CPU, chassis, and power fan connectors (4-pin CPU_FAN; 3-pin CHA_FAN; 3-pin PWR_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU FAN PWM CPU FAN IN CPU FAN PWR GND CPU_FAN PWR_FAN GND +12V Rotation Chapter 2 CHA_FAN Rotation +12V GND M4A88TD-V EVO M4A88TD-V EVO fan connectors Do not forget to connect the fan cables to the fan connectors.
7. Digital audio connector (4-1 pin SPDIF_OUT) +5V SPDIFOUT GND This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. M4A88TD-V EVO Chapter 2 SPDIF_OUT M4A88TD-V EVO Digital audio connector The S/PDIF module is purchased separately. 8.
9. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
10. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. +5V Ground Ground Speaker SPEAKER PLED- PLED+ PLED PANEL IDE_LED PWRSW Reset Ground PWR Ground M4A88TD-V EVO IDE_LED+ IDE_LED- PIN 1 RESET * Requires an ATX power supply Chapter 2 M4A88TD-V EVO System panel connector • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector.
2.8.4. ASUS Q-Connector (system panel) Use the ASUS Q-Connector to connect/disconnect the chassis front panel cables. To install the ASUS Q-Connector: Connect the front panel cables to the ASUS Q-Connector. Refer to the labels on the Q-Connector to know the detailed pin definitions, and then match them to their respective front panel cable labels. The labels on the front panel cables may vary depending on the chassis model. IDE_LED+ IDE_LED- PWR Ground Reset Ground 2.
2.9 1. Onboard LEDs Standby Power LED The motherboard comes with a standby power LED. The green LED lights up to indicate that the system is ON, in sleep mode, or in soft‑off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. SB_PWR M4A88TD-V EVO Chapter 2 OFF ON Standby Power Powered Off M4A88TD-V EVO Onboard LED 2.
3. Turbo Key II LED The Turbo Key II LED lights when the Turbo Key II switch is turned to Enable. O2LED2 M4A88TD-V EVO 4. Chapter 2 M4A88TD-V EVO Turbo Key II LED Core Unlocker LED The Core Unlocker LED lights when the Core Unclocker switch is turned to Enable. O2LED1 M4A88TD-V EVO M4A88TD-V EVO Core Unlocker LED The Core Unlocker LED keeps on lighting even though the ASUS Core Unlocker item in the BIOS menu is set to [Disabled]. ASUS M4A88TD-V EVO E5889_M4A88TD-V EVO_Contents V2.
2.10 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices in the following order: 6. a. Monitor b. External SCSI devices (starting with the last device on the chain) c.
Chapter 3 Chapter 3: 3.1 BIOS setup Knowing BIOS BIOS (Basic Input and Output System) stores system hardware settings such as storage device configuration, overclocking settings, advanced power management, and boot device configuration that are needed for system startup in the motherboard CMOS. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimum performance.
3.2.1 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® environment. The ASUS Update utility allows you to: • Save the current BIOS file • Download the latest BIOS file from the Internet • Update the BIOS from an updated BIOS file • Update the BIOS directly from the Internet • View the BIOS version information This utility is available in the support DVD that comes with the motherboard package.
3. Select the ASUS FTP site nearest you to avoid network traffic, or click Auto Select. Click Next. 4. From the FTP site, select the BIOS version that you wish to download. Click Next. 5. Follow the onscreen instructions to complete the update process. The ASUS Update utility is capable of updating itself through the Internet. Always update the utility to avail all its features. Updating the BIOS through a BIOS file 1. 2.
3.2.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a bootable floppy disk or an OS‑based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2: 1. Insert the USB flash disk that contains the latest BIOS file to the USB port, and then launch EZ Flash 2 in any of these two ways: • Press + during POST to display the following.
3.2.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. • Before using this utility, rename the BIOS file in the USB flash drive into M4A88TDV. ROM.
3.2.4 ASUS BIOS Updater The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or gets corrupted during the updating process. The succeeding utility screens are for reference only. The actual utility screen displays may not be same as shown. Before updating BIOS 1. Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single partition. 2.
Backing up the current BIOS To back up the current BIOS file using the BIOS Updater: Ensure that the USB flash drive is not write-protected and has enough free space to save the file. 1. At the FreeDOS prompt, type bupdater /o[filename] and press . D:\>bupdater /oOLDBIOS1.rom Filename Extension The [filename] is any user-assigned filename with no more than eight alphanumeric characters for the filename and three alphanumeric characters for the extension. 2.
Updating the BIOS file To update the BIOS file using BIOS Updater: 1. At the FreeDOS prompt, type bupdater /pc /g and press . D:\>bupdater /pc /g 2. The BIOS Updater screen appears as below. Update ROM 3. Press to switch between screen fields and use the keys to select the BIOS file and press . BIOS Updater checks the selected BIOS file and prompts you to confirm BIOS update. Chapter 3 Are you sure to update BIOS? Yes 4. No Select Yes and press .
3.3 BIOS setup program A BIOS Setup program is provided for BIOS item modification. When you start up the computer, the system provides you with the opportunity to run this program. Press during the Power-On Self-Test (POST) to enter the Setup utility. Otherwise, POST continues with its test routines. If you wish to enter Setup after POST, restart the system by pressing + + , or by pressing the reset button on the system chassis.
3.3.3 Navigation keys At the bottom right corner of a menu screen are the navigation keys for that particular menu. Use the navigation keys to select items in the menu and change the settings. The navigation keys may differ from one screen to another. 3.3.4 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items.
3.4 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. Select an item and press to display the submenu. Refer to section 3.3.1 BIOS menu screen for information on the menu screen items and how to navigate through them. 3.4.1 SATA 1/2/3/5/6, E-SATA Chapter 3 While entering Setup, the BIOS automatically detects the presence of SATA devices. There is a separate submenu for each SATA device.
Type [Auto] Allows you to select the type of device installed. [Not Installed] [Auto] [CDROM] [ARMD] Select this option if no device is installed. Allows automatic selection of the appropriate device type. Select this option if you are specifically configuring a CD-ROM drive. Select [ARMD] (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive. This item appears in SATA 5/SATA 6 only.
3.4.2 SATA Configuration The SATA Configuration menu allows you to configure your storage devices. Select an item then press to display the submenu. OnChip SATA Speed [Auto] [Auto] [SATA 3.0Gb/s] [SATA 6.0Gb/s] Allows automatic detection of the SATA speed. Set this item to [SATA 3.0Gb/s] if you installed 3.0Gb/s SATA HDDs on this motherboard. Set this item to [SATA 6.0Gb/s] if you installed 6.0Gb/s SATA HDDs on this motherboard.
3.4.3 System Information This menu gives you an overview of the general system specifications. The BIOS automatically detects the BIOS information, CPU specification, and system memory in this menu. Chapter 3 3-14 E5889_M4A88TD-V EVO_Contents V2.
3.5 Ai Tweaker menu The Ai Tweaker menu items allow you to configure overclocking-related items. Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this chapter vary depending on the CPU and DIMM model you installed on the motherboard. Chapter 3 Scroll down to display the following items: ASUS M4A88TD-V EVO E5889_M4A88TD-V EVO_Contents V2.
3.5.1 CPU Level UP [Auto] Allows you to select a CPU level, and the related parameters will be automatically adjusted according to the selected CPU level. If you want to manually configure the settings in detail, set CPU Overclocking to [Manual] after selecting a CPU level. Configuration options: [Auto] [Phenom II-955] [Phenom II-3.4G] [Phenom II-3.6G] 3.5.2 • The configuration options vary depending on the CPU model you install on the motherboard.
DRAM O.C. Profile [DDR3-1600MHz] This item appears only when you set the CPU OverClocking item to [D.O.C.P.] and allows you to select a DRAM O.C. profile, which applies different settings to DRAM frequency, DRAM timing and DRAM voltage. Configuration options: [DDR3-1600MHz] [DDR3-1800MHz] [DDR3-1866MHz] [DDR3-2000MHz] Profile Info : xxxxMHz–x-x-x-xx This item appears only when you set the CPU OverClocking item to [D.O.C.P.] and displays the current DRAM profile information.
3.5.5 CPU/NB Frequency [Auto] Allows you to select the CPU/NB frequency. Configuration options: [1400MHz] [1600MHz] [1800MHz] [2000MHz] 3.5.6 HT Link Speed [Auto] Allows you to select the HyperTransport link speed. Configuration options: [Auto] [200MHz] [400MHz] [600MHz] [800MHz] [1000MHz] [1200MHz] [1400MHz] [1600MHz] [1800MHz] [2000MHz] 3.5.7 [Enabled] [Disabled] GPU Booster [Enabled] Enables auto-optimization of the iGPU frequency. Set this item to [Disabled] for a fixed iGPU frequency.
3.5.9 DRAM Timing Configuration The configuration options for some of the following items vary depending on the DIMMs you install on the motherboard.
DRAM Refresh Rate [Auto] Configuration options: [Auto] [Every 7.8ms] [Every 3.9ms] DRAM Command Rate [Auto] Configuration options: [Auto] [1T] [2T] 3.5.10 DRAM Driving Configuration The configuration options for some of the following items vary depending on the DIMMs you install on the motherboard. CKE drive strength [Auto] Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x] CS/ODT drive strength [Auto] Configuration options: [Auto] [1x] [1.25x] [1.
CPU/NB Offset Voltage [Auto] This item appears only when you set the CPU & NB Voltage Mode item to [Offset] and allows you to set the CPU/NB Offset voltage. The values range from 0.003125V to 0.500000V with a 0.003125V interval. CPU Voltage [Auto] This item appears only when you set the CPU & NB Voltage Mode item to [Manual] and allows you to set a fixed CPU voltage.
3.5.19 SidePort Memory Voltage [Auto] Allows you to set the SidePort memory voltage. The values range from 1.50V to 1.80V with a 0.10V interval. 3.5.20 • Setting the above voltages to a high level may damage the CPU, memory module, and chipset permanently. Proceed with caution. • The system may require a better cooling system to work stably under high voltage settings. CPU Load-Line Calibration [Auto] Allows you to select the CPU Load-Line mode.
3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 3.6.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. Chapter 3 The items shown in this screen may be different due to the CPU you installed.
Microcode Updation [Enabled] [Enabled] [Disabled] Allows the system to update the Microcode automatically, enhancing system performance. Disables this function. Secure Virtual Machine Mode [Disabled] [Enabled] [Disabled] Enables the AMD Secure Virtual Machine mode. Disables this function. Cool‘n’Quiet [Enabled] [Enabled] [Disabled] Enables the AMD Cool’n’Quiet function. Disables this function. ACPI SRAT Table [Enabled] [Enabled] [Disabled] Enables the building of ACPI SRAT Table.
3.6.2 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press to display the submenu. NorthBridge Chipset Configuration Chapter 3 DRAM Controller Configuration Bank Interleaving [Auto] Allows you to enable the bank memory interleaving.
Memory Hole Remapping [Enabled] Configuration options: [Disabled] [Enabled] DCT Unganged Mode [Always] Configuration options: [Auto] [Always] Power Down Enable [Disabled] Enables or disables the DDR power down mode. Configuration options: [Disabled] [Enabled] ECC Configuration ECC Mode [Disabled] Disables or sets the DRAM ECC mode that allows the hardware to report and correct memory errors. Chapter 3 [Disabled] [Basic] [Good] [Super] [Max] [User] Disables the DRAM ECC mode.
Internal Graphics Configuration Primary Video Controller [GFX0-GPP-IGFX-PCI] Configuration options: [GFX0-GPP-IGFX-PCI] [GPP-GFX0-IGFX-PCI] [PCI-GFX0-GPP-IGFX] [IGFX-GFX0-GPP-PCI] Internal Graphics Mode [UMA+SidePort] Selects the internal graphics mode. Configuration options: [Disabled] [UMA] [SidePort] [UMA+SidePort] UMA Frame Buffer Size [Auto] This item appears only when you set the Internal Graphics Mode item to [UMA] or [UMA+SIDEPORT].
Frame Buffer Location [Above 4G] Allows you to select the FB Location. Configuration options: [Below 4G] [Above 4G] AMD HDMI Audio [Enabled] Allows you to disable or enable the AMD 880 HD Audio. Configuration options: [Disabled] [Enabled] 3.6.3 Onboard Devices Configuration Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address.
VT6330 1394/IDE Controller [Enabled] [Enabled] [Disabled] Enables the onboard IEEE 1394a/IDE controller. Disables the controller. VT6330 IDE Boot ROM [Enabled] [Enabled] Enables the VT6330 IDE Boot ROM. [Disabled] Disables the VT6330 IDE Boot ROM. 3.6.4 PCIPnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.
3.6.5 USB Configuration The items in this menu allow you to change the USB-related features. Select an item and press to display the configuration options. The USB Devices Enabled item shows the auto-detected values. If no USB device is detected, the item shows None. USB Functions [Enabled] [Enabled] [Disabled] Enables the USB Host Controllers. Disables the controllers. The following items appear only when you set USB Support to [Enabled].
3.7 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press to display the configuration options. 3.7.1 Suspend Mode [Auto] Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used for system suspend. [Auto] The system automatically configures the ACPI suspend mode. [S1 (POS) only] Sets the ACPI suspend mode to S1/POS (Power On Suspend).
3.7.4 APM Configuration Restore On AC Power Loss [Power Off] [Power On] [Power Off] [Last State] The system goes into on state after an AC power loss. The system goes into off state after an AC power loss. The system goes into either off or on state, whatever the system state was before the AC power loss. Power On From S5 By PME# [Disabled] [Disabled] [Enabled] Disables the PME to wake up from S5 by PCI/PCIE devices. Allows you to turn on the system through a PCI/PCIE LAN or modem card.
3.7.5 Hardware Monitor CPU Temperature(PECI) / MB Temperature ������������� [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignored if you do not wish to display the detected temperatures.
CPU Q-Fan Mode [Standard] [Turbo] Sets to [Turbo] to achieve maximum CPU fan speed. [Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on the CPU temperature. [Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan operation. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. Chassis Q-Fan Function [Disabled] [Disabled] [Enabled] Disables the Chassis Q-Fan feature. Enables the Chassis Q-Fan feature.
3.8 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press to display the submenu. 3.8.1 Boot Device Priority 1st – xxth Boot Device [Removable Dev.] • To select the boot device during system startup, press when ASUS Logo appears. • To access Windows OS in Safe Mode, do any of the following: - Press when ASUS Logo appears. - Press after POST. ASUS M4A88TD-V EVO E5889_M4A88TD-V EVO_Contents V2.
3.8.2 Boot Settings Configuration Quick Boot [Enabled] [Disabled] When set to [Disabled], BIOS performs all the POST items. [Enabled] When set to [Enabled], BIOS skips some power on self tests (POST) while booting to decrease the time needed to boot the system. Full Screen Logo [Enabled] [Enabled] [Disabled] Enables the full screen logo display feature. Disables the full screen logo display feature. Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
3.8.3 Security The Security menu items allow you to change the system security settings. Select an item and press to display the configuration options. Change Supervisor Password Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed. To set a Supervisor Password: 1. Select the Change Supervisor Password item and press . 2.
Change User Password Select this item to set or change the user password. The User Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed. To set a User Password: 1. Select the Change User Password item and press . 2. On the password box that appears, type a password composed of up to six letters and/or numbers, then press . 3. Confirm the password when prompted.
3.9 Tools menu The Tools menu items allow you to configure options for special functions. Select an item then press to display the submenu. 3.9.1 ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. For more details, refer to section 3.2.2 ASUS EZ Flash 2 utility. Express Gate [Auto] Chapter 3 3.9.
[No] Sets to [No] to disable the Reset User Data function when entering the Express Gate. The first time wizard will run again when you enter the Express Gate environment after clearing its settings. 3.9.3 ASUS O.C. Profile This item allows you to store or load multiple BIOS settings. Chapter 3 Add Your CMOS Profile Allows you to save the current BIOS file to the BIOS Flash.
Start O.C. Profile Allows you to run the utility to save and load CMOS. Press to run the utility. This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/CPU configuration and BIOS version. • Only the CMO file can be loaded. Chapter 3 3.9.
3.10 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Pressing does not immediately exit this menu. Select one of the options from this menu or from the legend bar to exit. Exit & Save Changes Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM.
Chapter 4 Chapter 4: 4.1 Software support Installing an operating system This motherboard supports Windows® XP/ 64-bit XP/ Vista / 64-bit Vista / 7 / 64-bit 7 operating systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. 4.2 • Motherboard settings and hardware options vary. Use the setup procedures presented in this chapter for reference only. Refer to your OS documentation for detailed information.
4.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening the files. 1. Click the Manual tab. Click ASUS Motherboard Utility Guide from the manual list on the left. 2. The Manual folder of the support DVD appears. Double-click the folder of your selected software.
4.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information. 4.3.1 ASUS PC Probe II PC Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. PC Probe II senses fan rotations, CPU temperature, and system voltages, among others.
4.3.2 ASUS AI Suite ASUS AI Suite allows you to launch several ASUS utilities easily. Launching AI Suite 1. Install AI Suite from the motherboard support DVD. 2. Launch AI Suite by clicking Start > All Programs > ASUS > AI Suite > AI Suite v1.xx. xx. The AI Suite main window appears. 3. The AI Suite icon appears in the Windows® notification area. If you minimize the application main window, click this icon to restore the window.
4.3.3 ASUS Fan Xpert Asus Fan Xpert allows you to adjust both the CPU and chassis fan speeds according to different ambient temperatures and your PC’s system loading. The various fan profiles offer flexible controls of fan speeds to achieve a quiet and cool system environment. Launching Fan Xpert After installing AI Suite from the motherboard support DVD, launch Fan Xpert by doubleclicking the AI Suite tray icon and then clicking the Fan Xpert button on the AI Suite main window.
4.3.4 ASUS EPU ASUS EPU is an energy-efficient tool that provides you with a total system power-saving solution. It detects the current computer loading and intelligently adjusts the power in real-time. With auto phase switching for components, the EPU automatically provides the most appropriate power usage via intelligent acceleration and overclocking. ASUS EPU provides you with these modes to choose from: • Auto Mode • High Performance Mode • Max.
4.3.5 ASUS Express Gate ASUS Express Gate is an ASUS exclusive OS that provides you with quick access to the Internet and key applications before entering the Windows® OS. Notices about ASUS Express Gate • Ensure to install ASUS Express Gate from the motherboard support DVD before use. • ASUS Express Gate does not support SATA devices in RAID mode. See chapter 3 for BIOS setup details. • Currently, ASUS Express Gate does not support SATA 6Gb/s devices. Please visit http://support.asus.
4.3.6 Audio configurations The Realtek® audio CODEC provides 8-channel audio capability to deliver the ultimate audio experience on your computer. The software provides Jack-Detection function, S/PDIF Out support, and interrupt capability. The CODEC also includes the Realtek® proprietary UAJ® (Universal Audio Jack) technology for all audio ports, eliminating cable connection errors and giving users plug and play convenience.
4.3.7 ASUS GPU Boost ASUS GPU Boost allows you to overclock the integrated GPU in WIndows® environment and takes effect in real-time without exiting and rebooting the OS. Refer to the CPU documentation before adjusting the integrated GPU voltage settings. Setting a high voltage may damage the integrated GPU permanently, and setting a low voltage may make the system unstable. • ASUS GPU Boost is available only when you install the GPU Boost driver from the motherboard support DVD.
4.4 ASUS Unique Overclocking Utility— TurboV EVO ASUS TurboV EVO introduces TurboV, CPU Level UP and Turbo Key—three powerful tools that allow you to overclock your system effectively. Install ASUS TurboV EVO from the support DVD that came with the motherboard package. If the TurboV EVO is correctly installed, you will find the TurboV EVO icon on the Windows® notification area. Click on the icon to display the TurboV EVO control panel. 4.4.
4.4.2 Using ASUS TurboV Auto Tuning Mode The Auto Tuning Mode allows smart auto-overclocking. Follow the instructions below to let TurboV EVO detect and overclock your system. 1. Click the Auto Tuning tab and then click Start. You can also click More Settings first to configure more overclocking parameters before starting auto-overclocking. 2. Read through the warning messages and click Yes to start auto-overclocking. 3.
4.4.3 Using CPU Level UP CPU Level UP allows you to upgrade your CPU at no additional cost. Pick a CPU level you want to overclock to, and CPU Level UP will do the rest for you. Click the CPU Level UP tab, pick a CPU level you want to overclock to by adjusting the slider, and then click Apply. 1. The CPU options vary depending on the CPU model you install on the motherboard. 2. Read through the warning messages and click Yes to start upgrading the CPU and restart the system. 4.4.
4.5 RAID configurations The motherboard comes with the AMD® SB850 chipset that allows you to configure Serial ATA hard disk drives as RAID sets. The motherboard supports the following RAID configurations: RAID 0, RAID 1, RAID 5 and RAID 10. 4.5.1 • You must install Windows® XP Service Pack 2 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP2 or later versions.
4.5.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: 1. Install the SATA hard disks into the drive bays. 2. Connect the SATA signal cables. 3. Connect a SATA power cable to the power connector on each drive. 4.5.
4.5.4 AMD® Option ROM Utility To enter the ��� AMD® Option �������������������� ROM utility: 1. Boot up your computer. 2. During POST, press + to display the utility main menu. Option ROM Utility (c) 2009 Advanced Micro Devices, Inc. [ Main Menu ] View Drive Assignments .......[ 1 ] LD View / LD Define Menu ......[ 2 ] Delete LD Menu ...............[ 3 ] Controller Configuration ......[ 4 ] [ Keys Available ] Press 1..
Creating a RAID volume To create a RAID volume: 1. In the Main Menu, press <2> to enter the LD View / LD Define Menu function. 2. Press + , and the following screen appears. Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
Deleting a RAID configuration Take caution when deleting a RAID volume. You will lose all data on the hard disk drives when you delete a RAID volume. To delete a RAID volume: 1. In the Main Menu, press <3> to enter the Delete LD function. 2. Select the RAID item you want to delete and press or + . Option ROM Utility (c) 2009 Advanced Micro Devices, Inc. [ Delete LD Menu ] LD No LD 1 [↑] Up 3.
4.6 Creating a RAID driver disk A floppy disk with the RAID driver is required when installing Windows® XP operating system on a hard disk drive that is included in a RAID set. For Windows® Vista or later operating systems, use either a USB flash drive with the RAID driver or the support DVD. 4.6.1 • The motherboard does not provide a floppy drive connector. You have to use a USB floppy disk drive when creating a SATA RAID driver disk.
3. When prompted to select the SCSI adapter to install, select the RAID driver for the corresponding OS version. 4. Follow the succeeding screen instructions to complete the installation. To install the RAID driver for Windows® Vista or later OS 1. During the OS installation, click Load Driver to allow you to select the installation media containing the RAID driver. 2. Insert the USB flash drive with RAID driver into the USB port or the support DVD into the optical drive, and then click Browse. 3.
5. Browse the contents of the RAID driver disk to locate the file txtsetup.oem. 6. Double-click the file. A window appears, allowing you to select the program for opening the oem file. 7. Use Notepad to open the file. 8. Find the [HardwareIds.SCSI.Napa_i386_ahci8086] and [HardwareIds.SCSI.Napa_amd64_ahci] sections in the txtsetup.oem file. 9. Type the following line to the bottom of the two sections: id = “USB\VID_xxxx&PID_xxxx”, “usbstor” [HardwareIds.SCSI.
Chapter 5 ATI® CrossFireX™ technology support Chapter 5: 5.1 ATI® CrossFireX™ technology 5.1.1 Chapter 5 The motherboard supports the ATI® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. Requirements • Prepare two identical CrossFireX-ready graphics cards or one CrossFireX-ready dualGPU graphics card that are ATI® certified.
5.1.3 Installing two CrossFireX™ graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. Chapter 5 1. Prepare two CrossFireX-ready graphics cards. 2. Insert the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation. 3.
5.1.4 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. 5.1.5 Chapter 5 Ensure that your PCI Express graphics card driver supports the ATI® CrossFireX™ technology. Download the latest driver from the AMD website (www.amd.com). Enabling the ATI® CrossFireX™ technology After installing your graphics cards and the device drivers, enable the CrossFireX™ feature through the ATI Catalyst™ Control Center in Windows environment.
5.2 ATI® Hybrid CrossFireX™ technology The motherboard supports the ATI® Hybrid CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) CrossFireX cards. Chapter 5 5.2.
5.2.4 Using the ATI® CATALYST® Control Center 1. Install a graphics card onto your motherboard. Refer to the User Guide that comes with your graphics card for details. 2. Right-click on the Windows® desktop, then click ATI CATALYST(R) Control Center from the shortcut menu. The ATI CATALYST Control Center screen appears. 3. Click Graphics Settings > CrossFire™, then select the Enable CrossFire™ check box. When a confirmation message pops up, click Yes. The screen blacks out for about one minute. 4.
Chapter 5 4. Right-click on the Windows® desktop, then click Personalize from the shortcut menu. 5. Click Display Settings. Select [Default Monitor] on ATI Radeon HD 4250 Graphics, then select the check boxes of This is my main monitor and Extend the desktop onto this monitor. Click OK, and then Yes from the confirmation window. 6. Restart the system. Right-click on the Windows® desktop, then click ATI CATALYST(R) Control Center from the shortcut menu. The ATI CATALYST Control Center screen appears.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax E-mail Web site Technical Support Telephone Online support 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 +886-2-2894-3447 +886-2-2890-7798 info@asus.com.tw www.asus.com.tw +86-21-38429911 support.asus.
E5889_M4A88TD-V EVO_Contents V2.2 2 5/26/10 4:06:14 PM (510)739-3777/(510)608-4555 800 Corporate Way, Fremont, CA 94539. Asus Computer International Signature : Date : Representative Person’s Name : Mar. 14, 2010 Steve Chang / President This device complies with part 15 of the FCC Rules.
