Specifications

ASUS M4N78 SE 2-19

Change User Password

Select this item to set or change the user password. The User Password item on top of the

screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a User Password:

1. Select the

Change User Password item and press <Enter>.

2. On the password box that appears, type a password composed of at most six letters

and/or numbers, then press <Enter>.

3. Conrm the password when prompted.

The message “Password Installed” appears after you set your password successfully.

To change the user password, follow the same steps as in setting a user password.

Clear User Password

Select this item to clear the user password.

Password Check [Setup]

When set to [Setup], BIOS checks for user password when accessing the Setup utility. When

set to [Always], BIOS checks for user password both when accessing Setup and booting the

system. Conguration options: [Setup] [Always]

2.7 Tools menu

2.7.1 ASUS EZ Flash 2

Allows you to run ASUS EZ Flash 2. When you press <OK>, a conrmation message

appears. Use the left/right arrow key to select between [Yes] or [No], then press <OK> to

conrm your choice.

Select Screen

Select Item

+- Change Field

Enter Go to Sub

Screen

F1 General Help

F10 Save and Exit

ESC Exit

ASUS EZ Flash 2

Express Gate [Auto]

Enter OS Timer [10 Seconds]

Reset User Data [No]

AI NET2

Press ENTER to run

the utility to select

and update BIOS.

This utility doesn't

support :

1.NTFS format

BIOS SETUP UTILITY

Main Advanced Power Boot Tools Exit