Instruction Manual
Table Of Contents
- Contents
- Chapter 1 Product introduction
- Chapter 2 BIOS setup
- 2.1 Managing and updating your BIOS
- 2.2 BIOS setup program
- 2.3 Main menu
- 2.4 Ai Tweaker menu
- 2.4.1 AI Overclocking [Auto]
- 2.4.2 DRAM Frequency Control [Auto]
- 2.4.3 HT Link Speed [Auto]
- 2.4.4 CPU Voltage [Auto]
- 2.4.5 CPU/NB Voltage [Auto]
- 2.4.6 CPU VDDA Voltage [Auto]
- 2.4.7 DRAM Voltage [Auto]
- 2.4.8 HT Voltage [Auto]
- 2.4.9 NB Voltage [Auto]
- 2.4.10 CPU/LDT Spread Spectrum [Disabled]
- 2.4.11 PCIE Spread Spectrum [Disabled]
- 2.4.12 SATA Spread Spectrum [Disabled]
- 2.4.13 PCI Spread Spectrum [Disabled]
- 2.5 Advanced menu
- 2.6 Power menu
- 2.7 Boot menu
- 2.8 Tools menu
- 2.9 Exit menu
1.5 Motherboard overview
1.5.1 Placement direction
When installing the motherboard, ensure that you place it into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis as indicated in
the image below.
1.5.2 Screw holes
Place nine (9) screws into the holes indicated by circles to secure the motherboard to the
chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis.
1-4
ASUS M4N78 PRO