Instruction Manual
Table Of Contents
- Contents
- Chapter 1 Product introduction
- Chapter 2 BIOS setup
- 2.1 Managing and updating your BIOS
- 2.2 BIOS setup program
- 2.3 Main menu
- 2.4 Ai Tweaker menu
- 2.4.1 AI Overclocking [Auto]
- 2.4.2 DRAM Frequency Control [Auto]
- 2.4.3 HT Link Speed [Auto]
- 2.4.4 CPU Voltage [Auto]
- 2.4.5 CPU/NB Voltage [Auto]
- 2.4.6 CPU VDDA Voltage [Auto]
- 2.4.7 DRAM Voltage [Auto]
- 2.4.8 HT Voltage [Auto]
- 2.4.9 NB Voltage [Auto]
- 2.4.10 CPU/LDT Spread Spectrum [Disabled]
- 2.4.11 PCIE Spread Spectrum [Disabled]
- 2.4.12 SATA Spread Spectrum [Disabled]
- 2.4.13 PCI Spread Spectrum [Disabled]
- 2.5 Advanced menu
- 2.6 Power menu
- 2.7 Boot menu
- 2.8 Tools menu
- 2.9 Exit menu

2-20
ASUS M4N78 PRO
SouthBridge Conguration
Hybrid SLI Support [Disabled]
Allows you to enable or disable the NVIDIA Hybrid SLI technology. This item is not user-
congurable when no external graphics card is installed.
Conguration options: [Disabled] [Auto]
Hybrid SLI Mode [mGPU Auto]
Allows you to select the Hybrid SLI mode.
Conguration options: [mGPU Auto] [mGPU always enable]
iGPU Frame Buffer Detect [Disabled]
Conguration options: [Disabled] [Auto]
Hybrid SLI Frame buffer size [256MB]
This item becomes user-congurable when you set the iGPU Frame Buffer Detect item to
[Disabled] and allows you to set the frame buffer size for the onboard GPU.
Conguration options: [32MB] [64MB] [128MB] [256MB] [512MB] [Disabled]
Primary Graphics Adapter [PCIE VGA Card First]
Allows you to select which graphics controller to use as the primary boot device.
Conguration options: [PCI VGA Card First] [Internal VGA First] [PCIE VGA Card First]
PCIE training [Gen2 if supported]
Conguration options: [Only Gen1] [Gen2 if supported]
2.5.3 Onboard Devices Conguration
Onboard LAN [Auto]
Allows you to enable or disable the onboard LAN.
Conguration options: [Auto] [Disabled]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN Boot ROM.
Conguration options: [Disabled] [Enabled]
HD Audio Device [Internal codec + External codec]
Allows you to congure the HD Audio controller.
Conguration options: [Disabled] [Internal codec + External codec] [Internal codec]
[External codec]
Front Panel Select [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-
denition audio depending on the audio standard that the front panel audio module supports.
Conguration options: [AC97] [HD Audio]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Conguration options: [Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]