Owner manual

ASUS M5A78L-M LX Series 2-17

2.5 Power menu

The Power menu items allow you to change the settings for the Advanced Conguration and

Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then

press <Enter> to display the conguration options.

2.5.1 Suspend Mode [Auto]

Allows you to select the Advanced Conguration and Power Interface (ACPI) state to be used

for system suspend. Conguration options: [S1 (POS) Only] [S3 Only] [Auto]

2.5.2 ACPI 2.0 Support [Enabled]

Allows you to enable or disable the Advanced Conguration and Power Interface (ACPI) 2.0

support. Conguration options: [Disabled] [Enabled]

2.5.3 ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Conguration and Power Interface (ACPI)

support in the Advanced Programmable Interrupt Controller (APIC). When set to Enabled, the

ACPI APIC table pointer is included in the RSDT pointer list. Conguration options: [Disabled]

[Enabled]

2.5.4 APM Conguration

Restore on AC Power Loss [Power Off]

When this item is set to [Power Off], the system goes into off state after an AC power loss.

When this item is set to [Power On], the system goes on after an AC power loss. When thisWhen this

item set to [Last State], the system goes into either off or on state, whatever the system

state was before the AC power loss. Conguration options: [Power Off] [Power On] [LastConguration options: [Power Off] [Power On] [Last

State]

Power on From S5 By PME# [Disabled]

Enables or disables PME wake from sleep states. Conguration options: [Disabled] [Enabled]

Power on From S5 By Ring [Disabled]

Enables or disables ring to generate a wake event. Conguration options: [Disabled]

[Enabled]

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Suspend Mode [Auto]

ACPI 2.0 Support [Enabled]

ACPI APIC Support [Enabled]

APM Conguration

HW Monitor Conguration

Anti Surge Support [Enabled]

Select the ACPI state

used for System

Suspend.

M5A78L-M LX PLUS BIOS Setup

Main Advanced Power Boot Tools Exit

Power Settings

Version 0302