User guide

3-10 Chapter 3: BIOS setup
Chapter 3
DRAM RAS# to CAS# Delay [Auto]
You can key in the desired value using the numeric keypad. The values range from 5 to 12.
DRAM RAS# PRE Time [Auto]
You can key in the desired value using the numeric keypad. The values range from 5 to 12.
DRAM RAS# ACT Time [Auto]
You can key in the desired value using the numeric keypad. The values range from 15 to 30.
DRAM READ to PRE Time [Auto]
You can key in the desired value using the numeric keypad. The values range from 4 to 7.
DRAM RAS# to RAS# Delay [Auto]
You can key in the desired value using the numeric keypad. The values range from 4 to 7.
DRAM WRITE to READ Delay [Auto]
You can key in the desired value using the numeric keypad. The values range from 4 to 7.
DRAM CAS# write Latency [Auto]
You can key in the desired value using the numeric keypad. The values range from 5 to 12.
DRAM WRITE Recovery Time [Auto]
Conguration options: [Auto] [5] [6] [7] [8] [10] [12]
DRAM REF Cycle Time [Auto]
Conguration options: [Auto] [90ns] [110ns] [160ns] [300ns] [350ns]
DRAM Row Cycle Time [Auto]
You can key in the desired value using the numeric keypad. The values range from 11 to 42.
DRAM READ to WRITE Delay [Auto]
You can key in the desired value using the numeric keypad. The values range from 3 to 17.
DRAM WRITE to READ Delay(DD) [Auto]
You can key in the desired value using the numeric keypad. The values range from 2 to 10.
DRAM WRITE to WRITE Timing [Auto]
You can key in the desired value using the numeric keypad. The values range from 2 to 10.
DRAM READ to READ Timing [Auto]
You can key in the desired value using the numeric keypad. The values range from 2 to 10.
DRAM Refresh Rate [Auto]
Conguration options: [Auto] [Every 7.8ms] [Every 3.9ms]
DRAM Command Rate [Auto]
Conguration options: [Auto] [1T] [2T]