Specifications
ASUS MAXIMUS VII GENE
3-9
Chapter 3
When the Ai Overclock Tuner is set to [Manual] or [XMP], the following items appear.
Filter PLL [Auto]
Set this item to high BCLK (base clock) mode when using a very high BCLK to improve
overclocking capability. Conguration options: [Auto] [Low BCLK mode] [High BCLK
mode]
BCLK Frequency [100]
This item allows you to set the BCLK (base clock) frequency to enhance the system
performance. Use the <+> or <-> to adjust the value. The values range from 80.0 MHz
to 300.0 MHz.
When Ai Overclock Tuner is set to [XMP], the XMP mode supported by the installed
memory module is displayed.
ASUS MultiCore Enhancement [Auto]
[Auto] This item allows you to maximize the oveclocking performance optimized
by ASUS core ratio settings.
[Disabled] This item allows you to set to default core ratio settings.
CPU Core Ratio [Sync All Cores]
This item allows you to set the CPU core ratio limit per core or synchronize automatically to
all cores.
Conguration options: [Auto] [Sync All Cores] [Per Core]
When the CPU Core Ratio is set to [Synch All Cores], the following item appears:
1-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 1-Core Limit value that must be higher than or equal to the 2-Core
Ratio Limit.
When the CPU Core Ratio is set to [Per Core], the following item appears:
1-Core Ratio Limit [Auto]
Congure the 1-core ratio limit that must be higher than or equal to the
2-core ratio.
2-Core Ratio Limit [Auto]
Congure the 2-core ratio limit that must be higher than or equal to the
3-core ratio limit. The 1-core ratio limit must not be set to auto.
3-Core Ratio Limit [Auto]
Congure the 3-core ratio limit that must be higher than or equal to the
4-core ratio limit. The 1-core and 2-core ratio limit must not be set to auto.
4-Core Ratio Limit [Auto]
Congure the 4-core ratio limit that must be lower than or equal to the
3-core ratio limit. The 1-core, 2-core, and 3-core ratio limit must not be set
to auto.
If you assign a value for more Core Ratio Limit, do not set the less Core Ratio Limit to
[Auto].