User's Manual

4-22
Chapter 4: Software support
Chapter 4
4.4.4 USB Charger+
USBCharger+allowsyoutoquick-chargeyourportableUSBdevicesevenifyourcomputer
isoff,insleepmodeorhibernatemode.
BeforeusingUSBCharger+,ensuretodisabletheErPReadyitemintheBIOS.Todo
this,gotoAdvanced > APM > ErP ReadyintheAdvancedmodethensetthisitemto
[Disabled].
USBCharger+isavailableonlyinselectedmotherboardmodels.
Launching USB Charger+
TolaunchUSBCharger+,clickortapthe onthetop-rightcorneroftheAISuite3
mainmenu,thenselectUSB Charger+.
Using USB Charger+
EnsuretoconnectyourUSBdeviceintotheUSBportthatsupportsthisutility.Referto
section2.3.1 Rear I/O connectionofyourusermanualformoredetails.
• USBCharger+doesnotsupportUSBhubs,USBextensioncables,andgenericUSB
cables.
• USBCharger+maynotrecognizesomeASUSdevicesduetovaryingdesign.
Click or tap to detect the connected USB device
Click or tap
to apply the
settings
Click or tap to
disregard the
settings
Click or tap to
fast-charge your
USB device
Indicates that the
connected USB
device is in charging
mode
Click or tap to stop
charging your USB
device
Click or tap to select the type of USB device
that you wish to charge when the system is off