MG248 series LCD Monitor User Guide
First Edition April 2017 Copyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Notices.......................................................................................................... iv Safety information........................................................................................ v Care & Cleaning........................................................................................... vi Takeback Services...................................................................................... vii Chapter 1: Product introduction 1.1 Welcome! .......
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
AEEE yönetmeliğine uygundur Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
viii
1.1 Welcome! Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a broader, brighter and crystal-clear display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
1.3 Monitor introduction 1.3.1 Front view 1 2 3 4 5 1. ( 5-way) button: • Turns on the OSD menu. Enacts the selected OSD menu item. • Increases/Decreases values or moves your selection up/down/left/right. • Displays the input selection bar when the monitor enters standby mode or displays the “NO SIGNAL“ message. 2. button • Exits the OSD menu item. • Displays the input selection bar when the monitor enters standby mode or displays the “NO SIGNAL“ message.
• Displays the input selection bar when the monitor enters standby mode or displays the “NO SIGNAL“ message. Power button/power indicator 5. • Turns the monitor on/off. • The color definition of the power indicator is as the below table. 1.3.2 Status Description White Amber OFF ON Standby mode/No signal OFF Back view 8 1. DC-IN port. This port connects the power cord. 2. DVI (Dual-Link) port. This 24-pin port is for PC (Personal Computer) DVI-D digital signal connection. 3. HDMI port.
1.3.3 GamePlus Function The GamePlus function provides a toolkit and creates a better gaming environment for users when playing different types of games. The crosshair overlay with four different crosshair options lets you choose the one that best suits the game you're playing. There's also an onscreen timer you can position on the left of the display so you can keep track of the elapsed gaming time; while the FPS (frames per second) counter lets you know how smooth the game is running.
1.3.4 GameVisual Function The GameVisual function helps you select among different picture modes in a convenient way. To active GameVisual: Press the GameVisual hotkey repeatedly to select. • Scenery Mode: This is the best choice for scenery photo displaying with GameVisualTM Video intelligence Technology. • Racing Mode: This is the best choice for racing game playing with GameVisualTM Video intelligence Technology.
1-6 Chapter 1: Product introduction
2.1 Assembling the monitor arm/base To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2. Attach the base into the arm, making sure the tab on the arm fits into the groove on the base. 3. Fix the base to the arm by fastening the bundled screw. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
2.2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • The recommended adjusting angle is +33˚ to -5˚ (for tilt)/+90˚ to -90˚ (for swiveling/ +130 mm (for height adjustment)/90˚ (for portrait view).
2.3 Detaching the arm (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Remove the rubbers in the four screw holes. (Figure 1) 3. Remove the base (Figure 2). 4. Use a screwdriver to remove the screw on the hinge (Figure 3), then remove the hinge.
2.4 Connecting the cables Connect the cables as the following instructions: • • To connect the power cord: a. Connect the power adapter securely to the monitor’s DC input. b. Connect one end of the power cord to the power adapter and the other end to a power outlet. To connect the DisplayPort/DVI/HDMI cable: a. Plug one end of the DisplayPort/DVI/HDMI cable to the monitor’s DisplayPort/DVI/HDMI port. b.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure ASUS MG248 RacingMode HDMI 1080p 60Hz GameVisual S c e n ery Mode R a c i ng Mode C i n e ma Mode R TS / RPG Mode F P S Mode s R G B Mode U s e r Mode 1. Press the ( ) button to activate the OSD menu. 2. Move the ( ) button up/down to navigate through the functions. ( Highlight the desired function and press the ) button to activate it.
2. Blue Light Filter In this function, you can adjust the blue light filter level. Blue Light Filter ASUS MG248 RacingMode HDMI 1080p 60Hz Level 0 Level 1 Level 2 Level 3 Level 4 • Level 0: No change. • Level 1~4: The higher the level, the less blue light is scattered. When Blue Light Filter is activated,the default settings of Racing Mode will be automatically imported. Between Level 1 to Level 3, the Brightness function is user-configurable. Level 4 is optimized setting.
3. Color Set a desired color setting from this menu. Color ASUS MG248 RacingMode HDMI 1080p 60Hz Brightness Contrast Saturation Color Temp. Skin Tone Smart View • Brightness: the adjusting range is from 0 to 100. • Contrast: the adjusting range is from 0 to 100. • Saturation: The adjusting range is from 0 to 100. • Color Temp.: contains 4 modes including Cool, Normal, Warm, and User Mode. • Skin Tone: contains three color modes including Reddish, Natural, and Yellowish.
• ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function. • Adaptive-Sync (DisplayPort only): Allows an Adaptive-Sync supported* graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update. To activate Adaptive-Sync, turn off ELMB function first. * Adaptive-Sync can only be activated within 40Hz ~ 144Hz.
7. System Setup Allows you to adjust the system. System Setup ASUS MG248 RacingMode HDMI 1080p 60Hz GameVisual Demo Mode ECO Mode OSD Setup Language Key Lock Information Power Indicator Power Key Lock All Reset • GameVisual Demo Mode: Activate the demo mode for the GameVisual function. • ECO Mode: reduces power consumption. • OSD Setup: * Adjusts the OSD timeout from 10 to 120 seconds. * Enables or disables the DDC/CI function. * Adjusts the OSD background from opaque to transparent.
8. MyFavorite Loads/Saves all settings on the monitor.
3.2 Specifications summary Panel Type Panel size Max. Resolution Pixel pitch Brightness (Typ.) Contrast Ratio (Typ.) Contrast Ratio (Max.) Viewing angle(H/V) CR>10 Display colors Response time Color temperature selection Analog input Digital input Temperature (Operating) TFT LCD 24”W (16:9, 61 cm) wide screen 1920 x 1080 0.276 mm x 0.276 mm 350 cd/m2 1000:1 100,000,000:1 (with ASCR on) 170˚/160˚ 16.7 M 1 ms (Gray to gray) 4 color temperatures No HDMI x 1, DisplayPort v1.
Accessories Compliance and Standards DisplayPort cable (optional), HDMI cable (optional), DVI (Dual-Link) cable (optional), Audio cable, power adapter, power cord, Driver and Manual disc, Quick start guide, warranty card UL/cUL, CB, CE, ErP, FCC, CCC, CU, RCM, BSMI, VCCI, RoHS, J-MOSS, WEEE, Windows 7 & 8.1 & 10 WHQL, CEL, MEPS, PSE, ISO9241307, UkrSEPRO, KCC, E-Standby, TUV-Flicker Free, TUV-Low Blue Light *Specifications are subject to change without notice. 3.
3.4 Supported operating mode Resolution Frequency Refresh Rate Horizontal 640x350 70Hz 31.469KHz 640x350 85Hz 37.861KHz 640x480 60Hz 31.469KHz 640x480 67Hz 35KHz 640x480 75Hz 37.5KHz 640x480 85Hz 43.269KHz 720x400 70Hz 31.469KHz 720x400 85Hz 37.927KHz 800x600 56Hz 35.156KHz 800x600 60Hz 37.897KHz 800x600 72Hz 48.077KHz 800x600 75Hz 46.875KHz 800x600 85Hz 53.674KHz 832x624 75Hz 49.725KHz 848x480 60Hz 31.02KHz 1024x768 60Hz 48.363KHz 1024x768 70Hz 56.
Resolution Frequency Refresh Rate Horizontal 1920x1080 60Hz 1920x1080 60Hz 66.587KHz 67.5KHz 1920x1080* (DVI/DP/HDMI) 85Hz 95.43KHz 1920x1080* (DVI/DP/HDMI) 100Hz 113.3KHz 1920x1080* (DVI/DP/HDMI) 120Hz 137.2KHz 1920x1080* (DVI/DP) 144Hz 158.11KHz 640x480P (HDMI) 59.94/60Hz 31.469KHz/31.5KHz 720x480P (HDMI) 59.94/60Hz 31.469KHz/31.5KHz 720x576P (HDMI) 50Hz 31.25KHz 1280x720P (HDMI) 50Hz 37.5KHz 1280x720P (HDMI) 59.94/60Hz 44.955KHz/45KHz 1440x480P (HDMI) 59.94/60Hz 31.
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Asus Computer International Responsible Party Name: 800 Corporate Way, Fremont, CA 94539. Address: Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : LCD Monitor Model Number : MG248******* Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules.
