Mini PC PB60G PB60V Benutzerhandbuch
G14667 Erste Ausgabe November 2018 URHEBERRECHTSINFORMATION Kein Teil dieses Handbuchs, einschließlich der darin beschriebenen Produkte und Software, darf ohne ausdrückliche schriftliche Genehmigung von ASUSTeK COMPUTER INC. (“ASUS”) mit jeglichen Mitteln in jeglicher Form reproduziert, übertragen, transkribiert, in Wiederaufrufsystemen gespeichert oder in jegliche Sprache übersetzt werden, abgesehen von vom Käufer als Sicherungskopie angelegter Dokumentation.
Inhaltsverzeichnis Über dieses Handbuch.........................................................................................................5 Anmerkungen zu diesem Handbuch..............................................................................6 Typographie.............................................................................................................................6 Verpackungsinhalt....................................................................................................
Inhaltsverzeichnis Anhang Sicherheitsinformationen....................................................................................................44 Einrichten Ihres Systems......................................................................................................44 Umsicht bei der Benutzung...............................................................................................44 Richtlinien und Vorschriften..............................................................................
Über dieses Handbuch Dieses Handbuch enthält Informationen über die Hardware- und Softwaremerkmale Ihres Mini PCs, geordnet in folgenden Kapiteln: Kapitel 1: Kennenlernen Ihres Mini PCs Dieses Kapitel beschreibt die Hardware-Komponenten Ihres Mini PCs. Kapitel 2: Ihren Mini PC verwenden Dieses Kapitel liefert Informationen zur Nutzung Ihres Mini PCs.
Anmerkungen zu diesem Handbuch Zum Hervorheben wichtiger Informationen sind manche Textabschnitte in diesem Handbuch wie folgt gekennzeichnet: WICHTIG! Diese Meldung enthält wichtige Informationen, denen Sie folgen müssen, um die Aufgabe fertigzustellen. HINWEIS: Diese Meldung enthält zusätzliche Informationen und Tipps, die Ihnen bei der Fertigstellung einer Aufgabe helfen können.
Verpackungsinhalt Ihr Mini PC-Paket enthält die folgenden Artikel: Mini PC Grafikmodul (optional) Netzteil* Netzkabel* Technische Unterlagen ASUS Mini PC PB60 Serie 7
HINWEIS: • • • • 8 * Das mitgelieferte Netzteil kann je nach Modell und Region variieren. Die mitgelieferten Zubehörteile können je nach Modell variieren. Für Einzelheiten zu diesem Zubehör schauen Sie in die jeweiligen Benutzerhandbücher. Die Geräteabbildung dient nur der Veranschaulichung. Tatsächliche Produktspezifikationen können je nach Modell variieren.
1 Kennenlernen Ihres Mini PCs
Produkteigenschaften Frontseite PB60V / PB60G Grafikmodul (optional) 10 ASUS Mini PC PB60 Serie
HINWEIS: Dieser Anschluss kann je nach Modell variieren. USB 3.1 (Gen2) Anschluss (nur für PB60V) Der USB (Universal Serial Bus) 3.1 (Gen2)-Anschluss bietet Datenübertragungsraten bis zu 10 Gbit/s. Diese Anschlüsse unterstützen auch die Akkuaufladetechnologie 1.2, mit der Sie Ihre USB-Geräte aufladen können. HINWEIS: Dieser Anschluss bietet eine maximale Ausgabe von 5V / 1,5A. USB 3.1 (Gen1) Anschluss (nur für PB60G) Der USB (Universal Serial Bus) 3.
USB 3.1 (Gen1) Typ-C™ Anschluss Dieser USB Typ-C™ (Universal Serial Bus)-Anschluss bietet Datenübertragungsraten von bis zu 5 Gbit/s. USB 3.1 (Gen2)-Anschluss Der USB (Universal Serial Bus) 3.1 (Gen2)-Anschluss bietet Datenübertragungsraten bis zu 10 Gbit/s. HINWEIS: Dieser Anschluss kann je nach Modell variieren. USB 3.1 (Gen2) Anschluss (nur für PB60V) Der USB (Universal Serial Bus) 3.1 (Gen2)-Anschluss bietet Datenübertragungsraten bis zu 10 Gbit/s. USB 3.
Linke Seite PB60V / PB60G Grafikmodul (optional) Grafikmodul-Anschluss Über diesen Anschluss können Sie das Grafikmodul mit Ihrem Mini PC verbinden. Entfernen Sie die Anschlussabdeckung, falls diese noch angebracht ist, bevor Sie das Grafikmodul an Ihren Mini PC anschließen. Grafikmodul-Stecker Der Grafikmodul-Stecker verbindet Ihr Grafikmodul mit Ihrem Mini PC. Grafikmodul-Verriegelung Mit der Grafikmodul-Verriegelung können Sie Ihr Grafikmodul an Ihrem Mini PC fixieren.
Rückseite PB60V / PB60G Grafikmodul (optional) WLAN-Antennenbuchse Die Buchse wird verwendet, um die mitgelieferte WLANAntenne anzuschließen und so den WLAN-Signalempfang zu verbessern.
Lüftungsöffnungen (Luftablassöffnung) Die Lüftungsöffnungen sorgen dafür, dass heiße Luft aus Ihrem Mini PC-Gehäuse ausströmt. WICHTIG! Damit Wärme optimal abgeleitet werden kann, achten Sie darauf, dass die Lüftungsschlitze nicht blockiert oder verstopft werden. ACHTUNG! Geben Sie auf die heiße Luft acht, die aus den Lüftungsöffnungen ausströmt, da sie Unbehagen bereiten oder zu Verletzungen führen kann.
Kensington® Schlossanschluss Mit dem Kensington® Schlossanschluss kann Ihr PC mit Kensington®-kompatiblen Sicherheitsprodukten gesichert werden. Stromeingang Das mitgelieferte Netzteil wandelt Wechselstrom in Gleichstrom, der für die Stromversorgung des Gerätes benötigt wird, um. Der Mini PC wird über diese Buchse mit Strom versorgt. Um eine Beschädigung des Mini PCs zu vermeiden, verwenden Sie ausschließlich das mitgelieferte Netzteil. WARNUNG! Das Netzteil kann sich während des Betriebes erwärmen.
LAN-Anschluss Der 8-polige RJ-45 LAN-Anschluss unterstützt ein Standardnetzwerkkabel zur Verbindung mit einem lokalen Netzwerk. Mini DisplayPort (am Grafikmodul) Dieser Anschluss ermöglicht es Ihnen, ein externes Display an Ihren Mini PC anzuschließen.
ASUS Mini PC PB60 Serie
2 Ihren Mini PC verwenden
Erste Schritte Montage Ihres Geräts auf den Ständer So montieren Sie Ihren Mini PC auf den Ständer: 1. Suchen Sie die Befestigungslöcher an der Unterseite Ihres Mini PCs. 2. Richten Sie die Befestigungslöcher des Ständers an den Befestigungslöchern Ihres Mini PCs aus, befestigen Sie den Ständer dann mit den Schrauben.
So montieren Sie Ihren Mini PC und das Grafikmodul auf den Ständer: 1. Suchen Sie die Befestigungslöcher an der Unterseite Ihres Grafikmoduls. 2. Richten Sie die Befestigungslöcher des Ständers an den Befestigungslöchern Ihres Grafikmoduls aus, befestigen Sie den Ständer dann mit den beiden mitgelieferten 8 mm Schrauben.
Verbinden Sie das Netzteil mit Ihrem Mini PC So schließen Sie das Netzteil an Ihren Mini PC an: A. Verbinden Sie das Netzkabel mit dem Netzteil. B. Schließen Sie den kleinen Netzteilstecker an den Stromanschluss (DC) Ihres Mini PCs an. C. Verbinden Sie den Netzstecker des Netzteils mit einer Steckdose (100 – 240 V Wechselspannung). HINWEIS: Das Netzteil kann optisch je nach Modell und Region variieren.
HINWEIS: Das Netzteil kann je nach Modell und Region variieren.
Anschließen eines Displays an Ihr Gerät Sie können ein Display oder einen Projektor mit Ihrem Gerät über die folgenden Anschlüsse verbinden: • VGA-Anschluss • DisplayPort • HDMI-Anschluss • DisplayPort HINWEIS: Diese Anschlüsse können je nach Modell variieren. So schließen Sie ein Display an Ihren Mini PC an: Verbinden Sie ein Ende eines VGA-, DisplayPort- oder HDMI-Kabels mit einem externen Display und das andere Kabelende mit dem VGA-, DisplayPort- oder HDMI-Anschluss Ihres Mini PCs.
Verbinden eines Displays via DisplayPort-Anschluss Verbinden eines Displays via HDMI-Anschluss ASUS Mini PC PB60 Serie 25
So schließen Sie ein Display an Ihr Grafikmodul an: Verbinden Sie ein Ende eines Mini DisplayPort-Kabels mit einem externen Display und das andere Kabelende mit dem Mini DisplayPort-Anschluss Ihres Grafikmoduls.
Schließen Sie das USB-Kabel der Tastatur oder Maus an Sie können generell jede beliebige USB-Tastatur und -Maus an Ihren Mini PC anschließen. Auch USB-Empfänger für kabellose Tastaturen und Mäuse lassen sich anschließen. So verbinden Sie eine Tastatur und Maus mit Ihrem Mini PC: Schließen Sie das USB-Kabel von Tastatur und Maus an einen beliebigen freien USB-Anschluss Ihres Mini PCs an. HINWEIS: Die Tastatur variiert je nach Land oder Region.
Schalten Sie Ihren Mini PC ein Drücken Sie den Ein-/Ausschalter, um Ihren Mini PC einzuschalten.
Mini PC ausschalten Falls Ihr Mini PC nicht reagieren sollte, halten Sie die Ein-/Austaste mindestens vier (4) Sekunden lang gedrückt, bis sich der PC ausschaltet. Ihren Mini PC in den Ruhezustand versetzen Versetzen Sie Ihren Mini PC in den Ruhezustand, indem Sie einmal die Ein-/ Austaste drücken. BIOS-Setup aufrufen BIOS (Basic Input and Output System) speichert Systemhardwareeinstellungen, die zum Systemstart im Mini PC benötigt werden.
Laden der BIOS-Standardeinstellungen So laden Sie die Standardwerte für jeden Parameter in Ihrem BIOS: • Rufen Sie das BIOS auf, indem Sie im POST-Bildschirm oder drücken. HINWEIS: Der Selbsttest (POST) besteht aus einer Reihe diagnostischer Prüfungen, die nach dem Einschalten Ihres Mini PCs ausgeführt werden. • • • 30 Navigieren Sie zum Exit-Menü. Wählen Sie die Option Load Optimized Defaults (Optimierte Standardwerte laden) oder drücken Sie die Schnelltaste .
3 Ihren Mini PC nachrüsten
WICHTIG! • • Es wird empfohlen, dass Sie die Speichermodule, die WLANKarte und den Solid State Drive (SSD) unter professioneller Aufsicht installieren oder aufrüsten. Besuchen Sie für weitere Unterstützung ein ASUS-Kundencenter. Achten Sie darauf, dass Ihre Hände trocken sind, bevor Sie mit dem Rest des Installationsvorgangs fortfahren. Tragen Sie vor der Installation von Komponenten eine geerdete Manschette oder berühren Sie einen geerdeten Gegenstand bzw.
3. Schieben Sie Ihren Mini PC in die entgegengesetzte Richtung der Grafikmodul-Verriegelung und heben Sie dann Ihren Mini PC an, um ihn vom Grafikmodul zu lösen. 4. Entfernen Sie die zwei (2) Schrauben von der Unterseite Ihres Mini PCs. 5. Bringen Sie die mitgelieferte Anschlussabdeckung am GrafikmodulAnschluss an.
Entfernen der oberen Abdeckung 1. Schalten Sie Ihren Mini PC aus und trennen Sie dann alle Kabel und Peripheriegeräte. 2. Entfernen Sie die Schraube an der Rückseite (A), schieben Sie dann die obere Abdeckung nach vorn, um sie zu entfernen (B). Einsetzen der oberen Abdeckung Setzen Sie die obere Abdeckung wieder ein und schieben Sie sie nach hinten (A). Befestigen Sie sie dann mit der zuvor entfernten Schraube (B).
Installieren von 2,5-Zoll-Festplatten oder SSDs 1. Entfernen Sie die vier (4) Schrauben, heben Sie dann den Speicherschacht an, um ihn aus dem Gehäuse zu entfernen. 2. Legen Sie Ihre Festplatte oder Ihr SSD in den Speicherschacht ein, befestigen Sie diese(s) dann mit den vier (4) Schrauben. 3. Schließen Sie das SATA-Kabel an der Festplatte oder dem SSD an.
4. Heben Sie die Klappe am SATA-Anschluss (A), verbinden Sie das SATAKabel mit dem SATA-Anschluss und schieben Sie dann die Klappe herunter, um das Kabel zu befestigen (B). 5. Setzen Sie den Speicherschacht wieder ein und befestigen Sie ihn mit den vier (4) zuvor entfernten Schrauben.
Installieren des M.2 SSDs (optional) Entfernen Sie den Speicherschacht, falls einer installiert ist. Befolgen Sie Schritt 2 im Abschnitt Installieren von 2,5-Zoll-Festplatten oder SSDs, um den Speicherschacht zu entfernen. So installieren Sie ein 2242 M.2 SSD Richten Sie das 2242 M.2 SSD am entsprechenden Steckplatz im Mini PC aus und stecken es ein. Drücken Sie dann das M.2 SSD vorsichtig über dem Schraubenloch herunter und befestigen Sie es mit Hilfe einer der mitgelieferten 3 mm Rundkopfschrauben.
Installieren des oberen Speichermoduls WICHTIG! • • • E ine Liste kompatibler DIMMs finden Sie unter http://www.asus. com. Sie können im DIMM-Steckplatz Ihres Mini PCs nur DDR4 SO-DIMMs installieren. Das Motherboard und andere Komponenten dürfen ausschließlich von autorisierten ASUS-Technikern aus dem Mini PC entfernt oder darin installiert werden. Bitte schauen Sie in den Garantiebestimmungen in der Garantiekarte.
3. Richten Sie das Speichermodul aus und setzen es in den Steckplatz ein (A). Drücken Sie es anschließend bis zum Einrasten nach unten (B).
Installieren der WLAN-Karte HINWEIS: Ihr Mini PC besitzt einen M.2-Steckplatz für 2230 WLANund Bluetooth-Module. Unter http://www.asus.com finden Sie eine Liste mit kompatiblen WLAN- und Bluetooth-Modulen. 1. Befolgen Sie die Schritte 1 und 2 im Abschnitt Installieren des oberen Speichermoduls, um den Lüfter vor der Installation der WLAN-Karte anzuheben. 2. Richten Sie die WLAN-Karte am entsprechenden Steckplatz im Mini PC aus und stecken sie ein. 3.
Installieren einer externen Taste 1. Entfernen Sie die Metallabdeckung des Punch-Out-Anschlusses. ACHTUNG! Seien Sie besonders vorsichtig, wenn Sie die Metallabdeckung entfernen. Verwenden Sie Werkzeuge, z. B. einen Schraubendreher zum Biegen und Entfernen der Metallabdeckung, damit Sie Verletzungen vermeiden. 2.
ASUS Mini PC PB60 Serie
Anhang
Sicherheitsinformationen Ihr Mini PC wurde entwickelt und getestet, um die neuesten Sicherheitsstandards für IT-Ausrüstung zu erfüllen. Um Ihre Sicherheit zu gewährleisten, müssen Sie die folgenden Sicherheitsanweisungen sorgfältig lesen. Einrichten Ihres Systems • • • • • • • Lesen und folgen Sie den Anweisungen im Handbuch, bevor Sie Ihr System in Betrieb nehmen. Benutzen Sie das Produkt nicht in der Nähe von Wasser oder Heizquellen. Stellen Sie das Gerät auf eine stabile Oberfläche.
• Wenn Sie mit dem Produkt auf eines der folgenden technischen Probleme stoßen, ziehen Sie den Stecker aus der Steckdose und kontaktieren Sie einen qualifizierten Fachmann oder Ihren Händler. – Das Netzkabel oder der Stecker ist beschädigt. – In Ihr System ist eine Flüssigkeit eingetreten. – Das System funktioniert nicht richtig, selbst wenn Sie die Anweisungen beachtet haben. – Das Gerät ist heruntergefallen oder das Gehäuse ist beschädigt. – Die Systemleistung hat sich verändert.
Richtlinien und Vorschriften REACH Die rechtlichen Rahmenbedingungen für REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) erfüllend, veröffentlichen wir die chemischen Substanzen in unseren Produkten auf unserer ASUS REACHWebseite unter http://csr.asus.com/english/REACH.htm ASUS Recycling/Rücknahmeservices Das ASUS-Wiederverwertungs- und Rücknahmeprogramm basiert auf den Bestrebungen, die höchsten Standards zum Schutz der Umwelt anzuwenden.
Erklärung der Federal Communications Commission Dieses Gerät entspricht Teil 15 der FCC-Vorschriften. Im Betrieb müssen die folgenden beiden Bedingungen erfüllt werden: • • Dieses Gerät darf keine schädliche Störstrahlung abgeben und Dieses Gerät muss für empfangene Störstrahlung unempfindlich sein, auch für Störstrahlung, die unerwünschte Funktionen hervorrufen kann. Dieses Gerät wurde geprüft und entspricht den Grenzwerten für digitale Geräte der Klasse B gemäß Teil 15 der FCC-Vorschriften.
Wireless-Kanäle für unterschiedliche Gebiete N. Amerika 2.412-2.462 GHz Kanal 01 bis Kanal 11 Japan 2.412-2.484 GHz Kanal 01 bis Kanal 14 Europa ETSI 2.412-2.
ENERGY STAR konformes Produkt ENERGY STAR ist ein gemeinsames Programm der US-Umweltschutzbehörde und der US-Energiebehörde, welches helfen soll, Geld zu sparen und die Umwelt durch energieeffiziente Produkte und Technologien zu schützen. Alle ASUS-Produkte mit dem ENERGY STAR-Logo erfüllen den ENERGY STAR-Standard und die Energieverwaltungsfunktion ist standardmäßig aktiviert. Monitor und der Computer werden nach einer inaktiven Zeit von 10 und 30 Minuten automatisch in den Ruhezustand versetzt.
ASUS Kontaktinformation ASUSTeK COMPUTER INC. Adresse 4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan Telefon +886-2-2894-3447 Fax +886-2-2890-7798 Webseite www.asus.com Technischer Support Telefon +86-21-38429911 Fax +86-21-5866-8722, ext. 9101# Online Support https://www.asus.com/support/Product/ ContactUs/Services/questionform/?lang=en ASUS COMPUTER INTERNATIONAL (Amerika) Adresse 48720 Kato Rd.