MZ27A Series LCD Monitor User Guide harman/kardon
First Edition June 2017 Copyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Table of contents Notices.......................................................................................................... iv Safety Information........................................................................................ v Care & Cleaning.......................................................................................... vii Takeback Services..................................................................................... viii 1.1 Welcome!.....................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety Information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• vi This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1 % by weight in homogenous materials and 0.01 % by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
1.1 Welcome! Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
1.3 Assembling the monitor base 1. Have the front of the monitor face down on a table. 2. Attach the base to the arm. 3. Turn the screw clockwise to secure the base. Then adjust the monitor to the angle that is most comfortable for you. •• 1-2 We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
1.3.1 Connecting the Woofer 1. Detach the woofer stand and unroute the woofer cable. 2. Align the triangle marks on the woofer and on the stand. Then replace the stand. 3. Connect the woofer cable to the monitor's woofer jack.
1.4 Connect cables 1.4.1 Rear of the LCD monitor HDMI-2 1 2 5 1-4 3 6 HDMI-1 3 HDMI-2 HDMI-1 7 8 4 9 10 1. 5-way button 6. Earphone jack 2. Power indicator 7. HDMI-2 port 3. Stereo speakers 8. HDMI-1 port 4. Kensington Lock 9. DisplayPort 5. Woofer jack 10.
1.5 Monitor introduction 1.5.1 Using the 5-way button Use the 5-way button on the back of the monitor to adjust the image settings and more. Move the activate various functions. 1. 5-way button into 5 different positions to 1 Menu 2 Close 3 Power Off 4 Volume 5 Blue Light Filter Menu: Push the 5-way button: • Once to enter the button functions menu. • Twice to enter the OSD menu. 2. Close: • 3. Move the 5-way button left to close the button functions menu.
1.5.2 QuickFit Function The QuickFit function allows users to have a preview of the document or photo layout directly on screen without printing test copies. QuickFit has three patterns: 1. Grid pattern: Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel. Alignment Grid 1 2. Alignment Grid 2 Paper size: Provides users to view their documents in real size on the screen. A4 B5 Letter A4 B5 Letter EXIT 3.
1.5.3 EyeCheck Function The EyeCheck function contains three patterns: (1) Snellen Chart (2) Amslter Grid (3) Astigmatism. 1. Snellen Chart P1 P2 P3 L0.7 L0.3 L0.1 L0.8 L0.4 L0.9 L0.5 L1.0 L0.2 L0.6 •• 2. To switch between P1~P3, move the L1.2 5-way button down. Amslter Grid While focusing at the center point, to check all lines should be straight. 3. Astigmatism To check each line should be the same width.
2.1 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling while changing its angle. • You can adjust the monitor’s angle from -5˚ to 22˚. -5˚ to +22˚ •• 2-1 It is normal that the monitor slightly shakes while you adjust the viewing angle.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure ASUS MZ27A Splendid Standard Mode HDMI-1 2560 x 1440 @ 60Hz Scenery mode Standard Mode Theater Mode Game Mode Night View Mode sRGB Mode Reading Mode Darkroom Mode MOVE/ENTER 1. Push the 2. Move the 5-way button (left, right, up, or down) to toggle between options in the menu. As you move from one icon to another, the option name is highlighted. 3. To select the highlighted item on the menu, push the 4.
3.1.2 1. OSD Function Introduction Splendid This function contains eight sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.
• • • 2. In the Standard Mode, the Saturation, Skin Tone, Sharpness, and ASCR functions are not user-configurable. In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness, Contrast, and ASCR functions are not user-configurable. In the Reading Mode, the Saturation, SkinTone, ASCR, Contrast, and Color Temp. functions are not user-configurable. Blue Light Filter In this function, you can adjust the blue light filter level.
3. Color Select the image color you like from this function. ASUS MZ27A Color Standard Mode HDMI-1 2560 x 1440 @ 60Hz Brightness Contrast Saturation Color Temp. Skin Tone MOVE/ENTER BACK/EXIT • Brightness: Adjust the brightness level. The adjusting range is from 0 to 100. • Contrast: Adjust the contrast level. The adjusting range is from 0 to 100. • Saturation: Adjust the saturation level. The adjusting range is from 0 to 100. • Color Temp.: Select the desired color temperature.
4. Image You can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel, ASCR, and Adaptive-Sync from this main function. ASUS MZ27A Image Standard Mode HDMI-1 2560 x 1440 @ 60Hz Sharpness Trace Free Aspect Control VividPixel ASCR Adaptive-Sync MOVE/ENTER • Sharpness: Adjust the picture sharpness. The adjusting range is from 0 to 100. • Trace Free: Speeds up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100.
5. Sound Adjust the sound settings to your preference. ASUS MZ27A Sound Standard Mode HDMI-1 2560 x 1440 @ 60Hz Volume AudioWizard MOVE/ENTER • Volume: Adjusts the output volume level. • AudioWizard: Select the preset sound mode. Available options: Music Mode, Movie Mode, Gaming Mode, and User Mode. • 6. BACK/EXIT In the User Mode, you can adjust the equalizer settings. Input Select Select the input source.
7. System Setup Adjust the system configuration. ASUS MZ27A System Setup Standard Mode HDMI-1 2560 x 1440 @ 60Hz Splendid Demo Mode GamePlus QuickFit EyeCheck ECO Mode OSD Setup Language More BACK/EXIT MOVE/ENTER (Page 1/2) ASUS MZ27A System Setup Standard Mode HDMI-1 2560 x 1440 @ 60Hz Back Key Lock Information Power Indicator Power Key Lock All Reset MOVE/ENTER BACK/EXIT (Page 2/2) 3-7 • Splendid Demo Mode: Activate the demo mode for the Splendid function.
To active GamePlus: • Select ON to enter the GamePlus main menu. • Move the 5-way button or to select between Crosshair, Timer, and FPS Counter function. • Push the 5-way button to confirm the function you choose. Move the 5-way button to go back.
3-9 • QuickFit: Please refer to page 1-6. • EyeCheck: Please refer to page 1-7. • ECO Mode: Activate the ecology mode for power saving. • OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the OSD screen. • Language: Select OSD language. • More: Return the next page of System Setting. • Back: Return the previous page of System Setting. • Key Lock: Pressing the second button on the right for more than five seconds to activate the key lock function.
3.2 Specifications Model MZ27AQ Panel Size 27.0 inches (68.6 cm) diagonal (Active Display Area: 596.74 (H) x 335.66 (V) mm Max. Resolution 2560 (H) x 1440 (V) pixels Brightness (Typ.) 350 cd/m2 Contrast Ratio (Typ.) 1000:1 Viewing Angle (CR≤10) 178°(V); 178°(H) Display Colors 16.7M colors (8 bits) Response Time (Typ.
3.3 Troubleshooting (FAQ) Problem Power LED is not ON Possible Solution • Press the 5-way button to check if the monitor is in the ON mode. • Check if the power adapter is connected to the monitor and the power cord is properly connected to the adapter and the power outlet. • Check Power Indicator function in main menu OSD. Select ON to turn on power LED. The power LED lights amber and • Check if the monitor and the computer are in the ON there is no screen image mode.
3.4 Supported Timing List Mode Resolution (active dot) Resolution (total dot) Horizontal Frequency (KHz) Vertical Frequency (Hz) Nominal Pixel Color (MHz) DOS 720x400@70Hz 900 x 449 31.469 70.087 28.322 640x480@60Hz 800 x 525 31.469 59.940 25.175 640x480@72Hz 832 x 520 37.861 72.809 31.500 640x480@75Hz 840 x 500 37.500 75.000 31.500 800x600@56Hz 1024 x 625 35.156 56.250 36.000 800x600@60Hz 1056 x 628 37.879 60.317 40.000 800x600@72Hz 1040 x 666 48.077 72.188 50.
