User's Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 USB Configuration
- 3.3.12 NVMe Configuration
- 3.3.13 Onboard Devices Configuration
- 3.3.14 Miscellaneous
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
N100I-EM-A
2-16
7. System Panel header (10-1 pin F_PANEL)
This header supports several chassis-mounted functions.
F_PANEL
PIN 1 PIN 9
PIN 2
PWR_BTN
PLED+
PLED-
PWRBTN#_PANEL
GND
HDLED+
HDLED-
GND
O_RSTCON#_PR
+5V_FPANEL
+PWR_LED
+HDD_LED RESET
Connector type
Header 2x5p, K10, 2.54mm pitch
• System Power LED header (2-pin +PWR_LED)
The 2-pin header allows you to connect the System Power LED. The System
Power LED lights up when the system is connected to a power source, or
when you turn on the system power, and blinks when the system is in sleep
mode.
•
Storage Device Activity LED header (2-pin +HDD_LED)
The 2-pin header allows you to connect the Storage Device Activity LED.
The Storage Device Activity LED lights up or blinks when data is read from or
written to the storage device or storage device add-on card.
•
Power Button/Soft-off Button header (2-pin PWR_BTN)
The 2 pin header allows you to connect the system power button. Press the
power button to power up the system, or put the system into sleep or soft-off
mode (depending on the operating system settings).
•
Reset button header (2-pin RESET)
The 2-pin header allows you to connect the chassis-mounted reset button.
Press the reset button to reboot the system.