User's Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 USB Configuration
- 3.3.12 NVMe Configuration
- 3.3.13 Onboard Devices Configuration
- 3.3.14 Miscellaneous
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
1-3
Chapter 1: General information
Internal
Connectors
1 x Clear CMOS header
1 x COM Debug header
1 x GPIO connector
1 x LVDS Signal header
1 x LCD Panel Monitor Switch header
1 x LVDS Panel VCC Power Selection jumper
1 x LVDS Panel Backlight Enable Signal Selection jumper
1 x LVDS Backlight Panel header
1 x 4-pin ATX power connector (DC in mode)
Watchdog Timer Yes
Security 1 x SPI TPM header
Manageability
WfM 2.0, WOL by PME
Power
requirement
12v DC-IN
Operation
Temperature
0~60°C
Non-Operation
Temperature
-40~85°C
Relative Humidity Operational humidity: 40°C@10%~95%
OS support
Windows
®
10 (64bit) / Windows
®
IoT enterprise
Ubuntu, RedHat Enterprise, Fedora Workstation, OpenSUSE
Form Factor
Mini-ITX Form Factor, 17.0cm x 17.0cm
NOTE: Specications are subject to change without notice.