User Manual

IE10234
Based on the chipset specication, N3150M-E & N3050M-E require USB
3.0 drivers to be preloaded in order to use USB keyboard/mouse during
Windows
®
7 64-bit installation. This section is a guide on preloading USB 3.0
drivers and installing Windows
®
7 64-bit.
Method 1: Using SATA ODD & USB devices
Load USB 3.0 drivers using the ASUS support DVD and install Windows
®
7
64-bit using a USB device.
1. Insert the Windows
®
7 64-bit installation DVD into a USB ODD, or copy
all les on the Windows
®
7 64-bit installation DVD to a USB storage
device on a working system.
2. Connect the USB ODD or USB storage device to your N3150M-E or
N3050M-E.
3. Insert the ASUS support DVD into a SATA ODD on your N3150M-E or
N3050M-E.
4. Power on your system and press F8 during POST (Power-On Self Test)
to enter the boot screen.
Windows
®
7 64-bit and USB 3.0 driver
installation
Requirement:
• 1 x ASUS support DVD
• 1 x Windows
®
7 64-bit installation source
• 1 x SATA ODD
• 1 x USB device (ODD or storage)
• The USB storage device requires 8 GB or more capacity. It is
recommended to format the storage device before use.
• If you want to install Windows 7 64-bit UEFI mode, please use USB
ODD + SATA ODD.
6. The USB 3.0 driver will be loaded automatically during installation
startup.
The “Setup is starting...” screen will show up if the USB 3.0 driver is
loaded correctly.
7. Follow the onscreen instructions to complete the Windows
®
7 64-bit
installation.
Method 2: Using a modied Windows
®
7 64-bit ISO
Load USB 3.0 drivers and install Windows
®
7 64-bit using a modied
Windows
®
7 64-bit installation DVD.
Requirement:
• 1 x ASUS support DVD
• 1 x Windows
®
7 64-bit installation source
• 1 x Working system (PC or notebook)
• 1 x SATA ODD
1. On your working system, create an ISO image le of the Windows
®
7
64-bit installation source using a third-party ISO software.
- 1 - - 2 -
- 3 -
- 4 -
2. Copy both “Auto_Unattend.xml” and “Auto_Unattend” folder from the
root directory of the ASUS supporting DVD to your system.
3. Edit the ISO le and add both “Auto_Unattend.xml” and “Auto_
Unattend” folder into the ISO le.
4. Burn this ISO le onto an empty DVD to create a modied Windows
®
7
64-bit installation DVD.
5. Insert the modied Windows
®
7 64-bit installation DVD into an ODD on
your N3150M-E or N3050M-E.
6. Power on your system and press F8 during POST (Power-On Self Test)
to enter the boot screen.
7. Select the ODD as the boot device.
8. The USB 3.0 driver will be loaded automatically during installation
startup.
The “Setup is starting...” screen will show up if the USB 3.0 driver is
loaded correctly.
9. Follow the onscreen instructions to complete the Windows
®
7 64-bit
installation.
5. Select the USB ODD or USB storage device as the boot device.
IE10234_Insert_page.indd 1 2015/6/16 10:11:07