Industrial Motherboard J3455T-IM-A N3350T-IM-A N4200T-IM-A
E23551 Revised Edition V4 April 2024 Copyright © 2024 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Chapter 1 1.1 Product overview Package contents.......................................................................... 1-1 1.2 Features......................................................................................... 1-1 1.3 Specifications................................................................................ 1-2 Chapter 2 Motherboard information 2.1 Before you proceed...................................................................... 2-1 2.2 Motherboard layout...
3.3.15 EZ-Flash........................................................................ 3-10 3.3.16 Miscellaneous................................................................ 3-10 3.4 Hardware Monitor menu............................................................. 3-11 3.5 Security menu............................................................................. 3-11 3.6 Boot menu................................................................................... 3-13 Boot Configuration........
Chapter 1 Product overview 1.1 Package contents Check your industrial motherboard package for the following items. 1 x ASUS J3455T-IM-A/N3350T-IM-A/N4200T-IM-A Motherboard 1 x SATA 6.0 Gb/s cable 1 x SATA power cable 2 x M.2 screw packages 1 x ASUS I/O Shield NOTE: If any of the above items is damaged or missing, contact your distributor or sales representative immediately. 1.
1.3 Specifications CPU Memory Graphics Expansion slots Storage Ethernet Audio Built-in Intel® Celeron® Quad-core Processor J3455/N3350/N4200 2 x DDR3L, max.
2 x USB 2.0 headers support additional 4 USB 2.
Chapter 2 Motherboard information 2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. CAUTION! • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
2.2 Motherboard layout NOTE: Place four screws into the holes indicated by circles to secure the motherboard to the chassis. CAUTION! Do not overtighten the screws! Doing so can damage the motherboard. 1 2 3 4 5 6 7 17.0cm(6.7in) 8 9 WDT_EN DC_PWR I2C ATX_5VSB CPU_FAN CHA_FAN KBMS_CON CLRTC AT_ATX_SEL ATX12V 2 10 VGA Place this side towards the rear of the chassis Intel® J3455/ N3350/ N4200 SoC SPI_TPM U32G1_34 29 HDMI 17.0cm(6.
Connectors/Jumpers/Slots 1. ATX Power connector (4-pin ATX12V) 2. CPU and Chassis fan headers (4-pin CPU_FAN, 4-pin CHA_FAN) 3. WDT Enbale jumper (2-pin WDT_EN) 4. Clear RTC RAM (2-pin CLRTC) 5. AT/ATX mode selection (3-pin AT_ATX_SEL) 6. Built-in Intel® Celeron® Quad-core Processor J3455/N3350/N4200 7. ATX 5V Standby Power header (3-pin ATX_5VSB) 8. DDR3L SO-DIMM slots 9. I2C header (6-1 pin I2C) 10. PS/2 Keyboard and Mouse header (8-pin KBMS_CON) 11. USB 2.0 headers (10-1pin USB_E12, USB_E34) 12.
2.3 Central Processing Unit (CPU) The motherboard comes with an onboard Intel® Celeron® Quad-core processor J3455/ J3455T-IM-A N3350/N4200.
2.4 System memory DIMM_B1 DIMM_A1 This motherboard comes with two Double Data Rate 3 Low Voltage (DDR3L) Small Outline Dual Inline Memory Modules (SO-DIMM) socket. The figure illustrates the location of the DDR3L DIMM socket: Sockets Channel DIMM_A1 Channel B DIMM_B1 J3455T-IM-A Channel A IMPORTANT! • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration.
2.5 1. Jumpers Clear RTC RAM (2-pin CLRTC) This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords. Connector type +3V_BAT GND J3455T-IM-A CLRTC HEADER 1x2p, 2.54mm pitch, S/T To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Use a metal object such as a screwdriver to short the two pins. 3. Plug the power cord and turn ON the computer. 4.
2. WDT Enable jumper (2-pin WDT_EN) A watchdog timer is an electronic timer that is used to detect and recover from computer malfunctions. The HW WDT (watchdog timer) Enable jumper allows the HW watchdog resets the system automatically even when the system crashes. WDT_EN J3455T-IM-A 1 Connector type 2 2 3 jumper closed (Default) jumper removed HEADER 1x2p, 2.54mm pitch, S/T NOTE: By default, this jumper is set to HW WDT enabled with a jumper cap attached. 3.
COM Ring/+5V/+12V selection (6-pin COM1_SEL) COM1_SEL J3455T-IM-A 4. 2 1 4 +12V 5. Setting Pins 12V 1-2 5V 3-4 Ring (Default) 5-6 3 +5V 6 5 RI (Default) Chassis intrusion header (4-1 pin_CHASSIS) J3455T-IM-A This header is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a low-level signal to this connector when a chassis component is installed.
Display panel VCC power selection (6-pin VCC_PWR_SEL) J3455T-IM-A 6. VCC_PWR_SEL 1 2 12V Setting Pins 12V 1.4.5-6 5V 1.4.5-3 3V (Default) 1.4.5-2 Connector type 3 3V (Default) HEADER 1 x 3p, 2.54mm pitch, S/T Display panel backlight power selection (3-pin BKLT_PWR_SEL) J3455T-IM-A 7. 5V BKLPWR_SEL 1 2 2 12V (Default) 5V 3 Pins 12V (Default) 1-2 5V 2-3 Connector type HEADER 1x3p, 2.
2.6 Connectors 2.6.1 Rear panel connectors 1 2 3 4 5 6 7 1. DC power connector. Insert the power adapter into this port. 2. Video Graphics Adapter (VGA) ports. These 15-pin ports are for VGA monitors or other VGA-compatible devices. 3. USB 3.2 Gen 1 (up to 5Gbps) ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.2 Gen 1 devices. 4. HDMI port.
2.6.2 1. Internal connectors ATX Power connector (4-pin ATX12V) Correctly orient the ATX power supply plug into this connector and push down firmly until the connector completely fits. ATX12V GND GND +12V_CPU +12V_CPU J3455T-IM-A PIN 1 2. CPU and Chassis Fan headers (4-pin CPU_FAN, 4-pin CHA_FAN) Connect the fan cables to the fan headers on the motherboard, ensuring that the black wire of each cable matches the ground pin of the header.
3. ATX 5V Standby Power header (3-pin ATX_5VSB) This header is for ATX 5V standby power. ATX_5VSB J3455T-IM-A ATX_PSON#_R GND +5VSB_IN PIN 1 4. I2C header The I2C (Inter-Integrated Circuit) header allows you to connect an I2C compatible IoT security module. Connector type 2-12 PIN 1 I2C1_SCL I2C1_SDA GND J3455T-IM-A +3V NC I2C Header 2x3p, K6, 2.
5. PS/2 Keyboard/mouse header (6-pin KBMS_CON) This header is for an IBM PS/2-compatible keyboard or mouse. J3455T-IM-A KBMS_CON 6. +5V_ZPS2 GND O_MS_DATA_R O_MS_CLK_R +5V_ZPS2 GND O_KB_DATA_R O_KB_CLK_R PIN 1 USB 2.0 headers (10-pin USBE12, USBE34) J3455T-IM-A These headers are for USB 2.0 ports. Connect the USB cables to these headers. These USB headers comply with USB 2.0 specification that supports up to 480 Mbps connection speed.
7. SATA Power connector (15-pin SATA_PWRCON) This connector is for the SATA power cable. The power cable plug is designed to fit this connector in only one orientation. Find the proper orientation and push down firmly until the connector completely fit. SATA_PWRCON PIN 1 J3455T-IM-A +12V +12V +12V GND GND GND +5V +5V +5V GND GND GND +3V +3V +3V IMPORTANT: The SATA power connector supports 1A current to the maximum. 8. SATA 6.0 Gb/s ports (7-pin SATA6G_1/2) J3455T-IM-A These ports connect to SATA 6.
9. Speaker header (4-pin SPEAKER) J3455T-IM-A The 4-pin header is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. SPEAKER SPKO GND GND +5V_SPKO PIN 1 Connector type HEADER 1x4p, 2.
10. System Panel header (10-1 pin F_PANEL) This header supports several chassis-mounted functions. PLED+ PLEDPWRBTN#_PANEL GND +PWR_LED PWR_BTN J3455T-IM-A PIN 1 HDLED+ HLED-_R GND O_RSTCON#_PR +5V_FPANEL F_PANEL +HDD_LED Connector type RESET Header 2x5p, K10, 2.54mm pitch • System power LED (2-pin +PWR_LED) • This 2-pin header is for the system power LED. Connect the chassis power LED cable to this header.
11. Flat panel display brightness header (8-pin LCD_BLKT_PANEL) This header is for the LCD panel brightness controls. Connector type PIN1 LCD_ENABKLT_CN_SW H_LCD_BL_PWM_SW BLKT_PWR BLKT_PWR GND GND J3455T-IM-A LCD_BLKT_PANEL WAFER 6p, 2.0mm pitch 12. MPCIE/MSATA combo slot (MPCIE_MSATA) This slot allows you to install a full length mSATA or mini-PCIe card, providing you with expandability and connectivity solutions for an optimal system performance.
13. LVDS/EDP header (30-pin LVDSEDP) This header is for an internal LVDS or embedded DisplayPort connection. LCD_VCC GND GND LVDS_TX_TA0P_SW LVDS_TX_TB0P LVDS_TX_TC0P_SW GND LVDS_TX_TCLK0P LVDS_TX_TD0P_SW LVDS_TX_TA1P_SW LVDS_TX_TB1P LVDS_TX_TC1P GND LVDS_TX_TCLK1P LVDS_TX_TD1P_SW LVDS_EDP J3455T-IM-A LCD_VCC LCD_VCC LVDS_Detect/EDP_HPD LVDS_TX_TA0N_SW LVDS_TX_TB0N LVDS_TX_TC0N_SW GND LVDS_TX_TCLKON LVDS_TX_TD0N_SW LVDS_TX_TA1N_SW LVDS_TX_TB1N LVDS_TX_TC1N GND LVDS_TX_TCLK1N LVDS_TX_TD1N_SW PIN 1 14.
15. General Purpose Input/output header (GPIO_CON) This header is for a general purpose input/output module which allows you to customize the digital signal input/output. GND GPIO8 GPIO6 GPIO4 GPIO2 J3455T-IM-A GPIO_CON 5V_GPIO GPIO7 GPIO5 GPIO3 GPIO1 PIN 1 Connector type WAFER HD 2x5p, 2.0mm pitch, S/T 16. Battery header (2-pin BATTERY) BATTERY +BAT GND J3455T-IM-A This header is for the lithium CMOS battery.
17. Front Panel Audio header (10-1 pin AAFP) J3455T-IM-A A_JD_HPOUT GND NC A_JD_FMIC1 This header is for a chassis-mounted front panel audio I/O module that supports HD Audio standard. Connect one end of the front panel audio I/O module cable to this header. AAFP A_FMIC1_L A_FMIC1_R A_HPOUT_R A_JD_FRONT A_HPOUT_L PIN 1 Connector type HEADER 2x5p, K8, 2.
19. NANO SIM Card slot J3455T-IM-A This slot connects to a NANO SIM card. NANO_SIM 20. COM Port header (10-pin COM1~COM6) A C B E D B C D F E F Connector type COM6 COM5 COM4 COM3 COM2 COM1 PIN 1 DCD# TXD GND RTS# Ring J3455T-IM-A A RXD DTR# DSR# CTS# This header is for a serial (COM) port. Connect the serial port cable to this header, then install the module to a slot opening at the back of the system chassis. BOX header 2x5p, K10, 2.
21. SPI TPM header (14-1 pin TPM) This header supports a Trusted Platform Module (TPM) system with a Serial Peripheral Interface (SPI), allowing you to securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. J3455T-IM-A SPI_TPM Connector type PIN 1 +VCC_SPI_TPM S_PLTRST# NC +1.
Chapter 3 BIOS setup IMPORTANT: update guide. 3.1 Scan the QR code to view the BIOS BIOS setup program Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program. Entering BIOS Setup at startup To enter BIOS Setup at startup: Press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines.
3.1.1 BIOS menu screen Menu bar The menu bar on top of the screen has the following main items: Main For changing the basic system configuration Advanced For changing the advanced system settings Hardware Monitor For displaying the system temperature and changing the fan settings Security For configuring the system security settings Boot For changing the system boot configuration. Exit For selecting the save options and default options.
3.3 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. NOTE: Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 3.3.1 Platform Trust Technology TPM Device Selection This item allows you to select the TPM device. Configuration options: [dTPM] [PTT] 3.3.
Max Package C State Allows you to control the maximum Package C State that the processor supports. Configuration options: [PC2] [PC1] [C0] Intel Virtualization Technology When set to [Enabled], a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. Configuration options: [Disabled] [Enabled] VT-d [Enable] Allows you to enable or disable VT-d function. Configuration options: [Enabled] [Disabled] 3.3.
Mode Select Allows you to select the mode. Configuration options: [8bit Mode (JEIDA)] [8bit Mode (VESA)] [6bit Mode (VESA and JEIDA)] Panel Power Sequence Control Allows you to enable or disable panel power sequence control. Configuration options: [Enabled] [Disabled] Panel_Vcc ON to Video_Data ON (T8) Allows you to select the Panel_Vcc ON to Video_Data ON (T8). Configuration options: [10ms] [20ms] [30ms] [40ms] Video_Data ON to BKLT_PWM ON (T9) Allows you to select the Video_Data ON to BKLT_PWM ON (T9).
3.3.5 PCI Express Configuration PCIe 2.0 x1 Root Port PCIe 2.0 x1 Root Port This item allows you to control the PCI Express root port. Configuration options: [AUTO] [Disable] [Enable] ASPM This item allows you to control the Active State Power Management on both NB (NorthBridge) side and SB (SouthBridge) side of the DMI Link. Configuration options: [Disable] [L0s] [L1] [L0sL1] [Auto] L1 Substates This item allows you to select the PCI Express L1 Substates settings. Configuration options: [Disabled] [L1.
3.3.6 CSM Configuration CSM Support Allow you to enable/disable the CSM support. Configuration options: [Disabled] [Enabled] NOTE: The following items appear only when you set CSM Support to [Enabled]. Network Controls the execution of UEFI and Legacy PXE OpROM. Configuration options: [Do not launch] [UEFI] [Legacy] Storage Controls the execution of UEFI and Legacy Storage OpROM. Configuration options: [Do not launch] [UEFI] [Legacy] Video Controls the execution of UEFI and Legacy Video OpROM.
3.3.8 Serial Console Redirection COM1~COM8 Console Redirection Allows you enable or disable the console redirection feature. Configuration options: [Enabled] [Disabled] 3.3.9 SATA Configuration SATA6G_1/2 Allow you to enable/disable the SATA6G_1/2/3 port. Configuration options: [Disabled] [Enabled] Hot Plug These items allow you to enable/disable SATA Hot Plug support. Configuration options: [Disabled] [Enabled] 3.3.
3.3.11 USB Configuration U32G1_1/2/3/4 Allows you to enable or disable USB port. Once set to [Disabled], any USB devices plugged into the connector will not be detected by BIOS or OS. Configuration options: [Disabled] [Enabled] USB_E1234 Allows you to enable or disable USB port. Once set to [Disabled], any USB devices plugged into the connector will not be detected by BIOS or OS. Configuration options: [Disabled] [Enabled] 3.3.
MPCIE_BT Controller Allow you to enable or disable MiniPCIe USB port, which is also known as BT Controller of MPCIe device. Once set to [Disabled], any USB devices plugged into the connector will not be detected by BIOS or OS. Configuration options: [Enable] [Disable] LAN1/2 Enable/Disable [Enabled] Enables the Intel LAN1/2 controller. [Disabled] Disables the controller. LAN1/2 PXE OPROM This item allows you to enable or disable the PXE Option ROM of the LAN1/2 controller.
[Disabled] 3.3.15 Disables RTC to generate a wake event. EZ-Flash Enter Ez-Flash mode This item allows you to run EzFlash utility. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. 3.3.16 Miscellaneous Native ASPM This item allows you to control the Active State Power Management on SA side of the DMI Link. Configuration options: [Disable][Enable] 3.
Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. To set an administrator password: 1. Select the Administrator Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. To change an administrator password: 1. Select the Administrator Password item and press . 2.
Secure Boot Secure Boot Secure Boot can be enabled if the system is running in User mode with enrolled platform Key (EPK) or if the CSM function is disabled. Configuration options: [Disabled] [Enabled] Secure Boot Mode In Custom mode, Secure Boot policy variables can be configured by a physically present user without full authentication. Configuration options: [Standard] [Custom] Key Management The Key Management item allows you to modify Secure Boot variables and set Key Management page.
FIXED BOOT ORDER Priorities Boot Option #1~#6 This item allows you to set the system boot order. Configuration options: [Hard Disk] [CD/DVD] [USB Device] [Network] [Disabled] 3.7 Exit menu The Exit menu items allow you to save or discard your changes to the BIOS items. Save Changes & Exit This option allows you to save your changes and exit the Setup program. When you select this option or if you press , a confirmation window appears. Select Yes to save changes and exit.
Appendix Notices FCC Compliance Information Responsible Party: Address: Phone / Fax No: Asus Computer International 48720 Kato Rd., Fremont, CA 94538, USA (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Declaration of compliance for product environmental regulation ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to https://esg.asus.com/Compliance.
ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to https://esg.asus.com/en/Takeback.htm for detailed recycling information in different regions. DO NOT throw the motherboard in municipal waste.
Service and Support Visit our multi-language website at https://www.asus.com/support/ Manufacturer ASUSTek COMPUTER INC. Address, City 1F., No. 15, Lide Rd., Beitou Dist.
