User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Platform Trust Technology
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphic Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 CSM Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 USB Configuration
- 3.3.12 Onboard Devices Configuration
- 3.3.13 Watchdog Timer
- 3.3.14 APM Configuration
- 3.3.15 EZ-Flash
- 3.3.16 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-11
Chapter 3: BIOS setup
[Disabled] Disables RTC to generate a wake event.
3.3.15 EZ-Flash
Enter Ez-Flash mode
This item allows you to run EzFlash utility. When you press <Enter>, a conrmation
message appears. Use the left/right arrow key to select between [Yes] or [No],
then press <Enter> to conrm your choice.
3.3.16 Miscellaneous
Native ASPM
This item allows you to control the Active State Power Management on SA side of
the DMI Link. Conguration options: [Disable][Enable]
3.4 Hardware Monitor menu
The items in this menu provide you an overview of system status including
temperature, fan speed and voltage, and allow you to congure the smart fan.
Smart Fan Mode
Allows you to select the smart fan mode. Conguration options: [Disabled] [Normal]
[Manual Mode]
NOTE: The following item appears only when you set Smart Fan Mode to
[Manual Mode].
Smart Fan Function
System Fan Setting
Temperature 1/2/3/4
Input value range: [0~255]
FD/RPM 1/2/3/4
Input value range: [0~255]
CPU Fan Setting
Temperature 1/2/3/4
Input value range: [0~255]
FD/RPM 1/2/3/4
Input value range: [0~255]
3.5 Security menu
This menu allows a new password to be created or a current password to be changed. The
menu also enables or disables the Secure Boot state and lets the user congure the System
Mode state.