User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Platform Trust Technology
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphic Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 CSM Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 USB Configuration
- 3.3.12 Onboard Devices Configuration
- 3.3.13 Watchdog Timer
- 3.3.14 APM Configuration
- 3.3.15 EZ-Flash
- 3.3.16 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-5
Chapter 3: BIOS setup
Mode Select
Allows you to select the mode. Conguration options: [8bit Mode (JEIDA)]
[8bit Mode (VESA)] [6bit Mode (VESA and JEIDA)]
Panel Power Sequence Control
Allows you to enable or disable panel power sequence control. Conguration
options: [Enabled] [Disabled]
Panel_Vcc ON to Video_Data ON (T8)
Allows you to select the Panel_Vcc ON to Video_Data ON (T8). Conguration
options: [10ms] [20ms] [30ms] [40ms]
Video_Data ON to BKLT_PWM ON (T9)
Allows you to select the Video_Data ON to BKLT_PWM ON (T9).
Conguration options: [100ms] [200ms] [250ms] [300ms]
BKLT_PWM ON to BKLT_Enable ON (T10)
Allows you to select the BKLT_PWM ON to BKLT_Enable ON (T10).
Conguration options: [10ms] [15ms] [20ms] [25ms]
BKLT_Enable OFF to BKLT_PWM OFF (T11)
Allows you to select the BKLT_Enable OFF to BKLT_PWM OFF (T11).
Conguration options: [5ms] [10ms] [15ms] [20ms]
BKLT_PWM OFF to Video_Data OFF (T12)
Allows you to select the BKLT_PWM OFF to Video_Data OFF (T12).
Conguration options: [100ms] [200ms] [250ms] [300ms]
Video_Data OFF to Panel_Vcc OFF (T13)
Allows you to select the Video_Data OFF to Panel_Vcc OFF (T13).
Conguration options: [10ms] [20ms] [30ms] [40ms]
Min Panel_Vcc OFF Time (T15)
Allows you to select the minimum Panel_Vcc OFF time (T15). Conguration
options: [600ms] [700ms] [800ms] [1000ms]
LVDS Spread Spectrum Control
Allows you to congure the LVDS spread spectrum clocking. Conguration
options: [Disabled] [+/- 1%% Center Spread] [+/- 0.5%% Center Spread]
RC6 (Render Standby)
RC6 (Render Standby)
Allows you to enable or disable render standby support. RC6 should be enabled if
S0ix is enabled. Conguration options: [Disable] [Enable]