User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 Trusted Computing
- 4.4.2 PCH Storage Configuration
- 4.4.3 Onboard Devices Configuration
- 4.4.4 ACPI Settings
- 4.4.5 APM Configuration
- 4.4.6 SMART Settings
- 4.4.7 NCT6116D Super IO Configuration
- 4.4.8 NCT6116D HW Monitor
- 4.4.9 Serial Port Console Redirection
- 4.4.10 CPU Configuration
- 4.4.11 AMI Graphic Output Protocol Policy
- 4.4.12 PCI Subsystem Settings
- 4.4.13 USB Configuration
- 4.4.14 Network Stack Configuration
- 4.4.15 SDIO Configuration
- 4.4.16 Platform Trust Technology
- 4.4.17 Security Configuration
- 4.4.18 LFP Configuration
- 4.4.19 Thermal
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
72
Single Board Computer
4.4.13 USB Configuration
NOTE: The USB Devices item shows the auto-detected values. If no
USB device is detected, the item shows None.
Legacy USB Support
[Disabled] The USB devices can be used only for the BIOS setup program.
It cannot be recognized in boot devices list.
[Enabled] Enables the support for USB devices on legacy operating
systems (OS).
[Auto] Allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled.
If no USB device is detected, the legacy USB support is disabled.
Hot-Plug Support
Globally enables or disables Hot-Plug support for the entire system. If
system has Hot-Plug capable Slots and this option set to [Enabled], it
provides a Setup screen for selecting PCI resource padding for Hot-Plug.
Configuration options: [Disabled] [Enabled]