User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 Video Configuration
- 3.3.3 PCH-FW Configuration
- 3.3.4 Trusted Computing
- 3.3.5 CPU Configuration
- 3.3.6 Graphic Configuration
- 3.3.7 PCI Express Configuration
- 3.3.8 SATA And RST Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 Power Management
- 3.3.13 Super IO Configuration
- 3.3.14 Serial Console Redirection
- 3.3.15 Miscellaneous
- 3.3.16 Realtek PCIe GBE Family Controller (MAC:00:E0:4C:68:00:0B)
- 3.3.17 APM Configuration
- 3.3.18 EZ-Flash
- 3.3.19 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
2-21
Chapter 2: Motherboard information
16. General Purpose Input/output header (GPIO_CON)
This header is for a general purpose input/output module which allows you to
customize the digital signal input/output.
+3V
GPIO7
GPIO5
GPIO3
GPIO1
GND
GPIO8
GPIO6
GPIO4
GPIO2
GPIO_CON
PIN 1
PIN 2
PIN 9
PIN 10
Connector type
WAFER HD 2x5p, 2.0mm pitch, S/T
17. LVDS Backlight Panel selection header (5-pin LCD_BLKT_PANEL)
This header is for the LVDS backlight panel selection.
+5V
H_LCD_BL_PWM_SW
LCD_ENABKLT_CN
GND
+12V
PIN1
LCD_BLKT_PANEL
Connector type
WAFER 5p, 2.0mm pitch