User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 Video Configuration
- 3.3.3 PCH-FW Configuration
- 3.3.4 Trusted Computing
- 3.3.5 CPU Configuration
- 3.3.6 Graphic Configuration
- 3.3.7 PCI Express Configuration
- 3.3.8 SATA And RST Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 Power Management
- 3.3.13 Super IO Configuration
- 3.3.14 Serial Console Redirection
- 3.3.15 Miscellaneous
- 3.3.16 Realtek PCIe GBE Family Controller (MAC:00:E0:4C:68:00:0B)
- 3.3.17 APM Configuration
- 3.3.18 EZ-Flash
- 3.3.19 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
N5105I-IM-A
2-24
CAUTION! Never connect a 1394 cable to the USB headers. Doing so will
damage the motherboard.
NOTE: The USB cables are purchased separately.
23. USB 2.0 headers (10-pin USB_E12, USB_56)
These headers are for USB 2.0 ports. Connect the USB cables to these
headers. These USB headers comply with USB 2.0 specication that
supports up to 480 Mbps connection speed.
USB_56USB_E12
A B
B
A
+5V_USB_P1234
S_USB_PN6
S_USB_PP6
GND
+5V_USB_P1234
S_USB_PN5
S_USB_PP5
GND
NC
PIN 1
PIN 2
PIN 9
PIN 10
PIN 1
PIN 2
PIN 9
PIN 10
+5V_USB_P1234
U2H_DN2
U2H_DP2
GND
+5V_USB_P1234
U2H_DN1
U2H_DP1
GND
NC
Connector type
Header 2x5p, K9, 2.54mm pitch
PIN 1
MSR_KB_CLK
MSR_KB_DATA
U2H_DP3
U2H_DN3
GND
+5V_ZPS2
MSR
22. MSR header (6-pin MSR)
MSR(Magnetic Stripe Reader) header is for a card reader.