User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 Video Configuration
- 3.3.3 PCH-FW Configuration
- 3.3.4 Trusted Computing
- 3.3.5 CPU Configuration
- 3.3.6 Graphic Configuration
- 3.3.7 PCI Express Configuration
- 3.3.8 SATA And RST Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 Power Management
- 3.3.13 Super IO Configuration
- 3.3.14 Serial Console Redirection
- 3.3.15 Miscellaneous
- 3.3.16 Realtek PCIe GBE Family Controller (MAC:00:E0:4C:68:00:0B)
- 3.3.17 APM Configuration
- 3.3.18 EZ-Flash
- 3.3.19 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
1-3
Chapter 1: General information
Internal
Connectors
1 x COM Debug header
1 x Parallel Port header
1 x Buzzer
1 x Mono Out amplier header
1 x AMP IC
1 X SPI TPM header
1 x MSR Pin header
2 x MSR Denition Change jumper
1 x LCD Panel Monitor Switch jumper
1 x LVDS panel VCC power selection jumper
1 x LVDS Panel Enable Signal selection jumper
1 x LVDS Backlight Panel selection jumper
1 x AT/ATX selection jumper
1 x 2V/24V RJ11 VCC selection jumper
Manageability
WfM 2.0, WOL by PME
Power
requirement
Power type: DC-IN mode
Voltage (only one of the following type can be used at one time):
- DC IN 12V
- 4-pin internal DC mode 12V
Operation
Temperature
0~60°C
Non-Operation
Temperature
-40~85°C
Relative Humidity 15%~95%
OS support
Windows
®
10 (64bit) – version after 20’H1, 20’H2
Ubuntu, RedHat Enterprise, Fedora Workstation, OpenSUSE
Form Factor
Mini-ITX Form Factor, 6.7”x 6.7” (17.0cm x 17.0cm)
NOTE: Specications are subject to change without notice.