G5462 Notebook-PC Benutzerhandbuch Mai 2010
Inhaltsverzeichnis Kapitel 1: Vorstellung des Notebook-PCs Über dieses Handbuch...................................................................................... 6 Anmerkungen zu diesem Handbuch........................................................... 6 Sicherheitshinweise........................................................................................... 7 Vorbereiten Ihres Notebook-PCs...................................................................
Kapitel 4: Benutzen des Notebook-PCs Zeigegerät...........................................................................................................48 Benutzung des Touchpads...........................................................................49 Abbildungen zur Bedienung des Touchpads........................................50 Pflege des Touchpads....................................................................................53 Automatische Touchpad-Sperre...................................
Verbotene Wireless-Frequenzbänder in Frankreich....................... A-25 UL-Sicherheitshinweise............................................................................ A-27 Stromsicherheitsanforderungen.......................................................... A-28 TV-Tuner-Hinweise..................................................................................... A-28 REACH-Hinweis...........................................................................................
1 Chapter 1: Vorstellung des Notebook-PCs
Über dieses Handbuch Sie lesen gerade das Notebook-Handbuch. Dieses Handbuch enthält Informationen zu den unterschiedlichen Notebook-Komponenten und ihrer Benutzung. Im Folgenden finden Sie die Hauptabschnitte dieses Handbuchs: 1. 2. 3. 4. 5. Vorstellung des Notebook-PCs Stellt Ihnen das Notebook und dieses Handbuch vor. Die einzelnen Teile Bietet Ihnen Information zu den Notebook-Komponenten. Erste Schritte Bietet Ihnen Information zu den ersten Arbeitsschritten mit dem Notebook.
Sicherheitshinweise Die Einhaltung der folgenden Vorsichtsmaßnahmen verlängert die Lebensdauer des Notebooks. Befolgen Sie deshalb bitte alle Vorkehrungen und Anleitungen. Überlassen Sie sämtliche Wartungsarbeiten, die nicht in diesem Handbuch angeführt sind, qualifiziertem Servicepersonal. Trennen Sie das Notebook vor der Reinigung vom Netzstrom und entnehmen Sie den/die Akku(s).
Zulässige Betriebstemperaturen: Dieser Notebook-PC darf nur in einer Umgebung mit einer Temperatur zwischen 5°C und 35° C verwendet werden. Bedecken Sie das eingeschaltete Notebook NICHT mit Materialien, die die Luftzirkulation beeinträchtigen. Stecken Sie es NICHT eingeschaltet in eine Tragetasche. Benutzen Sie KEINE beschädigten Netzkabel, Zubehörteile oder Peripheriegeräte. EINGANGSSPANNUNG: Prüfen Sie am Aufkleber an der Notebook-Unterseite, ob Ihr Adapter den Stromversorgungsanforderungen entspricht.
Vorbereiten Ihres Notebook-PCs Es folgt eine Kurzanleitung zur Nutzung Ihres Notebook-PCs.
Öffnen des Bildschirms 1. �������������������������������������������������������� Heben Sie den Bildschirm vorsichtig mit Ihren Daumen an. 2. Kippen Sie den Bildschirm langsam in den gewünschten Betrachtungswinkel. Einschalten des Notebooks 1. 2. Drücken Sie den Stromschalter unterhlb des Bildschirms und lassen Sie ihn wieder los. Benutzen Sie die Tasten [Fn]+[F5] oder [Fn]+[F6], um die LCDHelligkeit einzustellen.
2 Chapter 2: Die einzelnen Teile
Oberseite OFF 1 2 3 4 ON 5 ESC F1 F2 F4 F3 F5 F6 F7 F8 F9 F10 F11 F12 Pause Break Prt Sc SysRq Delete Insert Backspace Tab Home PgUp PgDn 8 9 7 Shift Shift 4 5 1 2 End 6 3 PgDn Enter Ctrl Fn Alt Alt Ctrl 10 PgUp Home Enter caps lock End NumLk Scr Lk 6 7 8 9 0 Insert Delete 11 12 13 1 Kameraanzeige Diese LED leuchtet, wenn die Kamera in Betrieb ist. 2 Kameraabdeckung Die Kameraabdeckung kann geschlossen werden, um die Kamera zu schützen.
3 Mikrofon (eingebaut) Das eingebaute Mono-Mikrofon kann für Videokonferenzen, Sprachführungen oder einfache Audio-Aufnahmen benutzt werden. 4 Kamera Die integrierte Kamera ermöglicht Bild- und Videoaufnahme. Diese Funktion kann bei Videokonferenzen und anderen interaktiven Anwendungen benutzt werden. 5 Bildschirm Die Bildschirmfunktionen sind die gleichen wie die eines Desktop-Monitors.
8 Multimedia-Tasten Die Multimedia-Tasten ermöglichen IHnen die aktivierung häufig benutzter Multimedia-Anwendungen mit nur einen Tastendruck. 9 Stromschalter Mit dem Ein-/Ausschalter schalten Sie Ihren Eee PC ein und aus und wecken ihn aus dem Ruhemodus wieder auf. Zum Einschalten drücken Sie die Taste einmal kurz; zum Ausschalten Ihres Eee PC halten Sie die Taste gedrückt. Der Ein-/Ausschalter funktioniert nur, wenn der LCD-Bildschirm geöffnet ist.
Unterseite Das Aussehen der Unterseite kann je nach Modell variieren. Die Größe des Akkupacks kann je nach Modell variieren. 1 2 4 6 3 5 WARNUNG! Die Unterseite des Notebooks kann sehr heiß werden. Seien Sie vorsichtig beim Umgang mit dem Notebook, während es in Betrieb ist oder gerade erst ausgeschaltet wurde. Hohe Temperaturen sind während des Betriebs und beim Laden des Akkus normal. Legen Sie das Notebook nicht auf weichen Oberflächen (z.B.
1 Akkuverriegelungsfeder 2 Die Akkuverriegelung sichert das Akkupack. Beim Einlegen rastet das Akkupack automatisch ein. Um das Akkupack zu entfernen, lösen Sie die Verriegelung. Akkupack 3 Der Akku lädt sich automatisch auf, sobald er an ein Netzteil angeschlossen wird, und beliefert den NotebookPC weiterhin mit Strom, wenn die Netzteilverbindung unterbrochen wird. Damit kann der Notebook-PC weiter betrieben werden, selbst wenn Sie zeitweilig Ihren Standort wechseln.
5 Speicherfach (RAM) Das Speicherfach bietet die Möglichkeit, den vorhandenen Speicher zu erweitern. Zusätzlicher Speicher erhöht die Leistung der Anwendungen durch Verringern der Festplattenzugriffe. Das BIOS erkennt automatisch die Größe des Arbeitsspeichers im System und konfiguriert den CMOS dementsprechend während des POSTProzesses. Es ist keine Hard- oder Software-Einstellung (eingeschlossen BIOS) notwendig, nachdem der Speicher installiert wurde.
Rechte Seite OFF ON HDMI 1 2 1 3 18 4 5 6 7 8 9 10 11 SPDIF-Ausgang Combo 2 3 E-SATA Dieser Anschluss ermöglicht die Verbindung mit SPDIF (Sony/Philips Digital Interface)-kompatiblen Geräten für digitale Audioausgaben. Verwenden Sie diese Funktion, um den Notebook-PC in ein Hi-Fi Heimunterhaltungssystem umzuwandeln. Kopfhörerausgang Die Stereo-Kopfhörerbuchse (1/8 Zoll) dient zum Verbinden des Audioausgangssignals vom Notebook-PC mit verstärkten Lautsprechern oder einem Kopfhörer.
4 5 6 7 8 Optisches Laufwerk Dieser Notebook-PC hat verschiedene Ausführungen hinsichtlich des optischen Laufwerks. Je nach der Ausführung unterstützt es Kompaktdiscs (CDs) und/oder Digitalvideodiscs (DVD) und hat Recordable (R) oder ReWritable (RW)-Funktionen. Details zu jedem Modell finden Sie auch in den Marketing-Spezifikationen. Aktivitätsanzeige für optisches Laufwerk (Position vom Modell abhängig) Zeigt an, dass das Notebook auf ein oder mehrere Speichergeräte, z.B. Festplatte, zugreift.
Linke Seite HDMI 1 E-SATA 1 2 3 4 5 6 7 Lüftungsöffnungen Die Lüftungsöffnungen lassen kühle Luft in den Notebook-PC hinein und die warme Luft wieder heraus. Stellen Sie sicher, dass Papier, Bücher, Textilien, Kabel oder ähnliches nicht die Lüftungen blockieren, da für den Notebook-PC sonst evtl. Überhitzungsgefahr besteht. Antenneneingang (nur bei bestimmten Modellen) 2 Den Antenneneingang für TV können Sie mit der beigefügten Antenne oder dem von Ihnen bezogenen Fernsehangebot nutzen.
5 Flash-Speicherkartenleser Normalerweise muß ein PCMCIA- oder USBSpeicherkartenleser zusätzlich gekauft werden, um Speicherkarten von Geräten, z.B. von Digital-Kameras, MP3Playern, Handys und PDAs, benutzen zu können. Dieser Notebook-PC hat einen eingebauten Speicherkartenleser und kann viele Speicherkarten, die später in dieser Anleitung beschrieben werden, lesen.
Rückseite 1 1 Strom (DC)-Eingang 2 3 4 Der beigefügte Netzwerkadapter wandelt Wechselstrom zur Verwendung mit dieser Buchse in Gleichstrom um. Diese Buchse versorgt den ASUS Notebook-PC mit Strom und lädt den internen Akku auf. Verwenden Sie nur den beigefügten Netzwerkadapter, um das ASUS Notebook nicht zu beschädigen. DER ADAPTER KANN SICH STARK ERHITZEN. DECKEN SIE DAS NETZTEIL AB UND HALTEN SIE ES VON IHREM KÖRPER FERN.
4 Kensington®-Schlossbuchse Mit dem Kensington®-Schloss können Sie Ihr Notebook mittels Kensington®-kompatibler NotebookSicherheitsprodukte sichern. Diese Sicherheitsprodukte umfassen z.B. ein Metallkabel sowie ein Schloss, damit Sie das Notebook PC an ein fixiertes Objekt anschließen können. Einige Sicherheitsprodukte umfassen auch einen Bewegungsmelder, der bei Bewegung des Gerätes einen Alarm auslöst.
3 Chapter 3: Erste Schritte
Energieversorgung Netzanschluss verwenden Die Stromversorgung des Notebook-PCs besteht aus zwei Teilen, dem Adapter und dem Batteriesystem. Der Adapter konvertiert Wechselstrom aus der Steckdose zum für das Notebook benötigten Gleichstrom. Der universale Wechselstrom-Gleichstromadapter ist im Lieferumfang des Notebooks enthalten, das heißt es kann problemlos an alle 100V-120V- sowie 220V-240V-Steckdosen angeschlossen werden.
WICHTIG! Wenn Sie dieses Notebook mit einem anderen Adapter betreiben oder mit dem Notebookadapter andere elektrische Geräte speisen, kann es zu Beschädigungen kommen. Wenn Rauch, Brandgeruch oder extreme Hitze vom Netzadapter kommen, wenden Sie sich an qualifiziertes Wartungspersonal. Wenden Sie sich auch dann an Wartungspersonal, wenn Sie einen fehlerhaften Netzadapter vermuten. Mit einem fehlerhaften Netzadapter können Sie sowohl Ihre Akkus als auch das Notebook beschädigen.
Akku verwenden Der Notebook-PC verfügt über ein auswechselbares Batteriepack, das aus mehreren zusammengeschlossenen Batterieeinheiten besteht. Ein vollständig geladenes Batteriepack liefert mehrere Stunden lang Strom. Diese Dauer kann mit den Energiesparoptionen in den BIOS-Einstellungen noch verlängert werden. Weitere Batteriepacks können zusätzlich noch von Ihrem Notebook-Händler erworben werden. Akku installieren und entfernen Der Akku ist bei Anlieferung des Notebooks u.U. bereits installiert.
So entfernen Sie den Akku 2 1 3 WICHTIG! Verwenden Sie nur die diesem Notebook beigelegten Akkus und Netzadapter, oder solche, die ausdrücklich vom Hersteller oder Händler zur Verwendung mit diesem Modell empfohlen werden, sonst kann Ihr Notebook beschädigt werden. Pflege des Akkus Wie alle wiederaufladbaren Akkus kann auch der NotebookAkku nicht beliebig oft neu aufgeladen werden.
Notebook einschalten Beim Einschalten des Notebooks erscheint seine Systemstartmeldung auf dem Bildschirm. Wenn nötig, können Sie die Helligkeit mit den Hotkeys einstellen. Wenn Sie das BIOS-SetupProgramm aufrufen oder die Systemkonfiguration ändern wollen, drücken Sie [F2] beim Booten des Systems. Wenn Sie die Taste [Tab] während des Begrüßungsbildschirms drücken, erscheinen Standard-Bootinformationen wie z. B. die BIOS-Version.
Self Monitoring and Reporting Technology Die S.M.A.R.T. (Self Monitoring and Reporting Technology) prüft die Festplatten während des POST und zeigt eine Warnung an, wenn das Festplattenlaufwerk gewartet werden muss. Wenn Sie während des Systemstarts kritische Festplattenwarnungen sehen, erstellen Sie sofort Sicherheitskopien Ihrer Daten und starten das Windows-Programm zur Datenträgerprüfung und diagnose.
Überprüfen des Akkus Das Batteriesystem arbeitet mit dem Windows Smart Battery Standard, der den Prozentsatz des im Batteriepack verbleibenden Energielevels akkurat wiedergibt. Ein vollständig geladenes Akkupack versorgt den Notebook-PC mehrere Stunden mit Strom, doch die genaue Dauer hängt von Ihren Stromspareinstellungen, Arbeitsgewohnheiten und von Prozessor, Systemspeicher und Monitorgröße des Notebooks ab. Die hier gezeigten Bilder können sich von den Anzeigen auf Ihrem System unterscheiden.
Laden des Akkus Bevor Sie Ihren Notebook PC ohne Netzanschluss betreiben können, muss die Batterie aufgeladen werden. Die Batterie fängt an zu laden, sobald der Notebook PC an das externe Netzteil angeschlossen ist. Laden Sie die Batterie vollständig auf, bevor Sie sie das erste Mal verwenden. Eine neue Batterie muss vollständig geladen werden, bevor Sie das Netzteil vom Notebook PC trennen.
Energieoptionen Der Stromschalter schaltet den Notebook-PC ein und aus oder versetzt ihn in den Energiesparmodus oder Ruhezustand. In der WindowsSystemsteuerung kann unter “Energieoptionen” festgelegt werden, welche Aktion beim Drücken des Stromschalters ausgeführt werden soll Für andere Optionen wie z.B. “Benutzer wechseln, Neu starten, Energie sparen, Ruhezustand oder Herunterfahren,” klicken Sie das Pfeilsymbol neben dem Schlosssymbol.
Not-Ausschalten Für den Fall, dass Ihr Betriebssystem nicht richtig ausgeschaltet oder neu gestartet werden kann, gibt es noch zwei Möglichkeiten, Ihren • Halten Sie die Stromtaste mehr als vier Sekunden lang gedrückt. WICHTIG! Um Datenverlust zu vermeiden, betätigen Sie die Reset-Taste nicht, während Daten noch geschrieben werden.
Energieverwaltungsmodi Das Notebook verfügt über eine Reihe automatischer und einstellbarer Stromsparfunktionen, mit denen Sie die Batterielebensdauer und Total Cost of Ownership (TCO) maximieren können. Einige dieser Funktionen können Sie über das Power-Menü im BIOS-Setup steuern. ACPI-Strommanagementeinstellungen werden über das Betriebssystem vorgenommen.
Energie sparen ist dasselbe wie Suspend-to-RAM (STR). Diese Funktion speichert Ihre aktuellen Daten und den Systemstatus im RAM (Arbeitsspeicher), während viele Komponenten ausgeschaltet werden. Da RAM flüchtiger Speicher ist, erfordert es Energie, um die Daten aufrechtzuhalten (aufzufrischen). Klicken Sie auf Windows und das Pfeilsymbol neben dem Schlosssymbol, um diese Option anzuzeigen. Sie können auch die Tastenkombination [Fn F1] drücken, um diesen Modus zu aktivieren.
Temperaturregelung Drei Methoden stehen zur Regelung der Temperatur des Notebooks zur Verfügung. Diese Regelmethoden können nicht vom Anwender konfiguriert werden und sollten bekannt sein, falls das Notebook in diese Zustände versetzt wird. Die folgenden Temperaturen repräsentieren die Gehäusetemperatur (nicht die der CPU). 38 • Der Lüfter schaltet sich für aktive Kühlung an, wenn die Temperaturen sich der Sicherheitsgrenze nähern.
Tastatursonderfunktionen Farbige Hotkeys OFF ON Im Folgenden finden Sie die Definitionen der farbigen Hotkeys auf der NotebookTastatur. Die farbigen Befehle können Sie nur aufrufen, wenn Sie zuerst die Funktionstaste gedrückt halten, während Sie eine Taste mit einem farbigen Befehl drücken. Die Positionen der Hotkeys können sich je nach Modell unterscheiden, die Funktionen der Hotkeys sollten sich deshalb aber nicht ändern. Halten Sie sich an die Symbole anstatt an die Funktionstasten.
Durchgestrichenes Touchpad (F9): Schaltet das eingebaute Touchpad auf LOCKED (deaktiviert) und UNLOCKED (aktiviert). Das Sperren des Touchpads verhindert unbeabsichtigte Zeigerbewegungen während des Schreibens und wird am besten mit einer externen Maus zusammen benutzt. ANMERKUNG: Ein Licht leuchtet zwischen den Schaltflächen des Touchpads von bestimmten Modellen auf, wenn das Touchpad NICHT gesperrt ist, und erlischt, wenn das Touchpad gesperrt ist.
Fn+Eingabetaste (erweiterte Tastatur): Schaltet zum Windows-”Rechner” um. Microsoft Windows Keys Es gibt zwei Windows-Tasten auf der Tastatur. Die Taste mit dem Windows-Logo öffnet das Startmenü in der linken unteren Ecke des Windows-Bildschhirms. Die andere Taste, die wie ein Windows-Menü mit einem kleinen Cursor aussieht, aktiviert das Eigenschaftenmenü.
Multimediatasten (an bestimmten Modellen) Mit Hilfe der Multimediatasten können Sie Multimediaanwendungen einfach und bequem bedienen. Im Folgenden werden die Funktionen der Multimediatasten am Notebook-PC mit dem Windows Media Player beschrieben. Die Ergebnisse können bei anderen Multimediaprogrammen anders ausfallen. Einige Kontrolltasten können je nach Notebook-Modell anders ausfallen. Für die CD-Kontrollfunktion benutzen Sie die [Fn]-Taste zusammen mit den Pfeiltasten.
Multimedia-Schnellstarttasten Es gibt an der Oberseite Ihrer Tastatur vier MultimediaSchnellstarttasten mit den folgenden Funktionen.
Tasten und Statusanzeigen Tasten OFF ON Express Gate-/ Power4Gear-Taste Diese Taste startet Express Gate, wenn das Notebook ausgeschaltet ist. Genauere Informationen siehe Express Gate Benutzerhandbuch. Unter Windows funktioniert diese Taste als Power4Gear Hybrid-Taste. Damit können Sie zwischen den verschiedenen Energiesparmodi umschalten. Die Energiesparmodi steuern viele Aspekte Ihres Notebook-PCs, um die Leistung gegenüber den Akkulaufzeit zu maximieren.
Statusanzeigen Oberseite OFF ON Vorderseite Nummernverriegelungsanzeige Zeigt an, dass die Nummernverrieglung [Num Lk] aktiviert ist. Mit Hilfe der Nummernverriegelung können einige Tasten der Tastatur zur Zahleneingabe genutzt werden. Capital Lock-Anzeige (Großbuchstaben-Feststelltaste) Zeigt an, dass Capital Lock [Caps Lock] aktiviert ist. Capital Lock ermöglicht die Feststellung der Großschrift einiger Buchstabentasten (z.B. A, B, C).
Betriebsanzeige Die Betriebsanzeige leuchtet auf, wenn der Notebook.PC eingeschaltet ist und blinkt langsam, wenn sich der NotebookPC im Save-to-RAM (Suspend) -Modus befindet. Diese Anzeige leuchtet nicht, wenn der Notebook-PC ausgeschaltet ist. Batterieladeanzeige (zweifarbig) Die zweifarbige Batterie-Indikator-LED zeigt Ihnen den Batteriestatus wie folgt: Grün EIN: Der Akku ist zwischen 95% und 100% aufgeladen (Netzteil ist angeschlossen).
4 Chapter 4: Benutzen des Notebook-PCs
Zeigegerät Das integrierte Touchpad dieses Notebook ist mit allen zweitastigen/ dreitastigen Mäusen und PS/2-Wheel-Mäusen vollständig kompatibel. Das Touchpad ist druckintensiv und enthält keine beweglichen Teile. Aus diesem Grund können mechanische Fehler vermieden werden. Zur Arbeit mit einigen Anwendungen muss ein Gerätetreiber installiert werden.
Benutzung des Touchpads Zur Benutzung des Touchpads müssen Sie einfach nur etwas Druck mit einer Fingerspitze ausüben. Die Hauptfunktion des Touchpads ist, den Cursor zu bewegen oder Elemente auf dem Bildschirm auszuwählen, wobei Sie Ihre Fingerspitze statt eine DesktopMaus verwenden. Die folgenden Abbildungen zeigen die richtige Bedienung des Touchpads. Bewegen des Zeigers Berühren Sie mit Ihrem Finger die Mitte des Touchpads und gleiten in eine beliebige Richtung, um den Cursor zu bewegen.
Abbildungen zur Bedienung des Touchpads Klicken/Klopfen - Drücken Sie die linke Taste oder klopfen mit Ihrer Fingerspitze leicht auf das Touchpad, wenn sich der Cursor über einem Bildschirmelement befindet (lassen Sie Ihren Finger auf dem Touchpad, bis das Element ausgewählt ist). Dadurch ändert das ausgewählte Element seiner Farbe. Die folgenden beiden Beispiele haben identische Resultate.
Ziehen - Ziehen bedeutet, ein Element “aufzuheben” und es an einen gewünschten Ort auf dem Bildschirm zu ziehen. Bewegen Sie dazu den Cursor über das gewünschte Bildschirmelement. Halten Sie nun die linke Taste des Touchpads gedrückt und bewegen den Cursor auf die gewünschte Position. Lassen Sie die linke Taste daraufhin los. Alternativ können Sie einfach auf das Element doppelklopfen und es mit Ihrer Fingerspitze an den gewünschten Ort ziehen.
Zwei-Finger-Tippen - Benutzen Sie zwei Finger, um auf das Touchpad zu tippen, um einen Klick auf das Rad der Maus zu simulieren. Drei-Finger-Tippen - Benutzen Sie drei Finger, um auf das Touchpad zu tippen, um einen Rechtsklick mit der Maus zu simulieren.
Pflege des Touchpads Das Touchpad ist druckintensiv. Wenn Sie es nicht richtig pflegen, kann es leicht beschädigt werden. Beachten Sie die folgenden Vorkehrungen. • • • • Das Touchpad darf nicht mit Schmutz, Flüssigkeiten oder Fett in Berührung kommen. Berühren Sie das Touchpad nicht mit schmutzigen oder nassen Fingern. Legen Sie keine schweren Objekte auf das Touchpad oder die Touchpad-Tasten. Zerkratzen Sie das Touchpad nicht mit Ihren Fingernägeln oder irgendwelchen harten Objekten.
2. Klicken Sie oben auf ELAN und markieren Sie dann Internes Zeigegerät deaktivieren, wenn externes USB-Zeigegerät angeschlossen ist. 3. Klicken Sie auf OK, um die Konfiguration zu beenden.
Speichergeräte Damit kann der Notebook-PC Dokumente, Bilder und dandere Dateien von/auf die verschiedenen Datenträger lesen oder schreiben. Flash-Speicherkartenleser Um Speicherkarten von Geräten wie Digitalkameras, MP3-Spielern, Handys und PDAs verwenden zu können, muss im Normalfall ein PCMCIA Speicherkartenleser gekauft werden. Dieser Notebook PC hat einen internen Speicherkartenleser, der viele der in der folgenden Abbildung gezeigten Flash-Speicherkarten lesen kann.
Optisches Laufwerk Einlegen einer optischen Disk 56 1. Drücken Sie bei eingeschaltetem Notebook die Auswurftaste, fährt der Laufwerkträger ein Stück aus. 2. Ergreifen Sie die Vorderseite des Trägers und ziehen Sie ihn vorsichtig bis zum Anschlag heraus. Achten Sie dabei darauf, nicht die Linse und die mechanischen Teile des optischen Laufwerks zu berühren. Vergewissern Sie sich, dass sich keine Gegenstände unter dem Laufwerkträger befinden, die ihn festklemmen könnten.
3. Halten Sie die Disk am Rand fest, wobei ihre etikettierte Seite nach oben weist. Drücken Sie auf beiden Seiten auf die Diskmitte, bis sie in der Nabe einrastet. Die Nabe tritt etwas hervor, wenn die Disk richtig eingelegt ist. 4. Drücken Sie den Laufwerkträger langsam wieder hinein. Das Laufwerk liest jetzt das Inhaltsverzeichnis auf der Disk. Wenn das Laufwerk stoppt, kann die Disk verwendet bzw. abgespielt werden.
Entfernen einer optischen Disk Drücken Sie die Auswurftaste und heben Sie die Disc vorsichtig an der Kante hoch, um sie von der Nabe zu entfernen. Notauswurf einer Disk Der Notauswurf ist ein Loch am optischen Laufwerk und wird benutzt, um die Schublade des optischen Laufwerkes herauszufahren, falls der elektrische Auswurf nicht funktioniert. Benutzen Sie den Notauswurf nicht an Stelle des elektrischen Auswurfes.
Benutzen des optischen Laufwerks Optische Disks und Geräte müssen aufgrund einer präzisen Mechanik im Laufwerk pfleglich behandelt werden. Beachten Sie die wichtigen Sicherheitshinweise des CD-Herstellers. Anders als bei den optischen Laufwerken von Desktop-Rechnern wird die CD bei einem Notebook von einer Nabe festgehalten, ungeachtet des Winkels. Beim Einlegen einer CD ist es wichtig, dass die CD auf die Nabe in der Mitte aufgedrückt wird, da sie sonst vom optischen Laufwerk verkratzt wird.
Festplatte Festplatten haben sehr viel mehr Kapazität und arbeiten wesentlich schneller als Floppylaufwerke und CD-ROM-Laufwerke. Im Lieferumfang des Notebooks ist eine entfernbare Festplatte enthalten. Derzeitige Festplatten unterstützen die S.M.A.R.T.Technologie (Self Monitoring and Reporting Technology), die Festplattenfehler oder -ausfälle erkennt, noch bevor sie auftreten. Wenden Sie sich für Upgrades an eine authorisierte Kundendienstoder Verkaufsstelle.
Entfernen der Festplatte 1 2 Installieren einer Festplatte 1 Notebook-PC Benutzerhandbuch 2 61
Arbeitsspeicher (RAM) Das Speicherfach bietet die Möglichkeit, den vorhandenen Speicher zu erweitern. Wenden Sie sich an einen autorisierten Händler, um Informationen über Speichererweiterungen für Ihr Notebook zu erhalten. Nur der Erwerb der Speichererweiterungsmodule von autorisierten Händlern stellt ein Maximum an Kompatibilität und Funktionssicherheit dar. Das BIOS erkennt automatisch die Größe des Arbeitsspeichers im System und konfiguriert den CMOS dementsprechend während des POSTProzesses.
Anschlüsse Das integrierte Netzwerk kannen nicht zu einem späteren Zeitpunkt als Upgrade eingebaut werden. Nach dem Kauf kann eine Netzwerkkarte nur als Erweiterungskarte installiert werden. Netzwerkanschluss Verbinden Sie ein Ende eines Netzwerkkabels, das RJ-45-Stecker an beiden Enden hat, mit dem Modem/Netzwerk-Anschluss am Notebook-PC und das andere Ende mit einem Hub oder Switch.
Twisted-Pair-Kabel Dieses Kabel zum Anschluss der Ethernetkarte an einen Host (normalerweise ein Hub oder Switch) wird “Straight-through Twisted Pair Ethernet (TPE)” genannt. Die Anschlüsse an den Enden sind sogenannte RJ-45-Anschlüsse, welche nicht kompatibel mit RJ-11Telefonanschlüssen sind. Beim Anschluss zweier Computer ohne zwischengeschalteten Hub ist ein Crossover Twisted-Pair erforderlich. Gigabit-Modellen unterstützen automatisches Crossover, daher ist ein Crossover-LAN-Kabel optional.
Wireless LAN-Anschluss (nur bei bestimmten Modellen) Beim optionalen integrierten Wireless LAN handelt es sich um einen kompakten, einfach zu bedienenden Wireless Ethernet-Adapter. Mit dem IEEE 802.11-Standard für Wireless LAN (WLAN), erreicht das optionale integrierte Wireless LAN rasante Datenübertragungsraten durch die Direct Sequence Spread Spectrum (DSSS)- und Octogonal Frequency Division Multiplexing (OFDM)-Technologien auf 2.4 GHz-Frequenzen.
Ad-hoc-Modus Im Ad-hoc-Modus kann das Notebook mit einem anderen WirelessGerät verbunden werden. Hierzu wird kein zusätzlicher Access Point (AP) benötigt. (Alle Geräte müssen 802.11 Wireless LANAdapter installiert haben.) Notebook PC Desktop PC PDA Infrastruktur-Modus andere Geräte über einen Access Point (AP, muss separat erworben werden) auf ein Wireless-Netzwerk zugreifen.
Antennenanschluss (nur bei bestimmten Modellen) Hier finden Sie Details über die Multimedia-Verbindungen für TVTuner-Modelle.TV- und Radioempfang erfordert ein nur an bestimmten Modellen eingebautes Modul. WICHTIG! Der Notebook-PC darf mit der Antenne nur in geschlossenen Räumen verwendet werden. Kabelanschluss Verbinden Sie ein Koaxialkabel eines Kabel-TV-Anbieters, einer Dachantenne oder einer Zimmerantenne mit den Kabeladapter.
DTV-Antennenanschluss Verbinden Sie die mitgelieferte digitale TV-Antenne mit den NotebookPC, indem Sie den Kabeladapter benutzen. Die digitale TV-Antenne kann nur digitale TV-Signale, die in bestimmten Regionen gesendet werden, empfangen. Digitaler TV-Empfang ist nur an bestimmten Modellen verfügbar und ist abhängig von der Entfernung zum Sender und eventuellen Hindernissen.
Windows Wireless Netzwerkverbindung Verbindung mit einem Netzwerk 1. 2. Schalten Sie den Wireless-Schalter für Ihr Modell ein, falls erforderlich (siehe Schalter in Abschnitt 3). Drücken Sie mehrmals [FN F2], bis das WLAN- & Bluetooth-Symbol angezeigt wird. oder doppelklicken Sie auf das Symbol der Wireless-Konsole in der Taskleiste und wählen Sie das Wireless LAN-Symbol. 3. Klicken Sie in der Taskleiste auf das WLAN-Symbol mit einen orangen Stern . 4.
5. 6. 7. Bei der Verbindung müssen Sie eventuell ein Kennwort eingeben. Nachdem die Verbindung hergestellt wurde, wird diese in der Liste angezeigt. In der Taskleiste wird das WLAN-Symbol angezeigt. Das Symbol für die WLAN-Verbindung wir durchgestrichen wenn Sie die Tasten + drücken, um die WLAN-Funktion zu deaktivieren.
Bluetooth Wireless-Verbindung (nur in bestimmten Modellen) Notebook PCs mit Bluetooth-Technologie machen die Anschaffung von Kabeln zur Verbindung mit Bluetooth-Geräten überflüssig. Geräte mit Bluetooth-Funktion sind z.B. andere Notebooks, DesktopPCs, Handys und PDAs. Wenn Ihr Notebook-PC keine eingebaute Bluetooth-Funktion besitzt, müssen Sie ein USB- oder ExpressCard-Bluetooth-Modul anschließen, um die Bluetooth-Funktion benutzen zu könnens.
oder doppelklicken Sie auf das Symbol der Wireless-Konsole in der Taskleiste und wählen Sie das Bluetooth-Symbol. 72 3. Gehen Sie von der Systemsteuerung zu Netzwerk und Internet > Netzwerk- und Freigabecenter und klicken Sie dann in der linken Spalte auf Adaptereinstellungen ändern. 4. Rechtsklicken Sie auf BluetoothNetzwerkverbindung und wählen Sie BluetoothNetzwerkgeräte anzeigen. 5. Klicken Sie auf Gerät hinzufügen, um nach neuen Geräten zu suchen.
6. Wählen Sie auf BluetoothGerät aus der Liste aus und klicken Sie auf Weiter. 7. Geben Sie den BluetoothSicherheits-Code in Ihr Gerät ein, um die Kopplung zu starten. 8. Die Kopplung wurde erfolgreich eingerichtet. Klicken Sie auf Schließen, um die Einstellung zu beenden.
Notebook-PC Benutzerhandbuch
A Anhang
Optionales Zubehör Diese Geräte dienen der optionalen Vervollständigung Ihres Notebooks. USB-Hub (Optional) Durch Anschluss eines optionalen USB-Hubs vermehren sich die USB-Anschlüsse und Sie können schnell viele USB-Peripheriegeräte über ein einziges Kabel anschließen oder abtrennen. USB Flash-Speicherdisk Eine USB-Flash-Speicherdisk ist ein Datenträger, bietet eine Speicherkapazität von bis zu einigen Gigabyte, hohe Transfergeschwindigkeit und lange Lebensdauer.
Betriebssystem und Software Dieses Notebook bietet seinen Kunden (je nach Region) ein vorinstalliertes Windows-Betriebssystems. Der Umfang für Hardware- und Software-Support kann vom installierten Betriebssystem abhängig sein. Stabilität und Kompatibilität anderer Betriebssysteme kann nicht garantiert werden.
System BIOS-Einstellungen Boot Device (Boot-Gerät) 1. Wählen Sie im Boot-Bildschirm Boot Option #1. Aptio Setup Utility - Copyright (C) 2009 American Megatrends, Inc. �������������������� Main Advanced Boot Security Save & Exit Set the system boot order. Boot Configuration UEFI Boot PXE ROM [Disabled] [Disabled] Boot Option Priorities Boot Option #1 Boot Option #2 [P0: Hitachi HTS545...] [P1: HL-DT-ST BDDVD.
Security Setting (Sicherheitseinstellung) Aptio Setup Utility - Copyright (C) 2009 American Megatrends, Inc. Main ������������������������ Advanced Boot Security Save & Exit Password Description Set the system boot order. If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the user’s password is set, then this is a power on password and must be entered to boot or enter Setup.
Save Changes (Änderungen speichern) Sie müssen Ihre Änderungen vor Verlassen des BIOS-Setup speichern, damit sie angewendet werden. Wenn Sie die Standardeinstellungen wiederherstellen wollen, wählen Sie Restore Defaults. Daraufhin müssen Sie die Änderungen speichern. Aptio Setup Utility - Copyright (C) 2009 American Megatrends, Inc. ������������������������ Main Advanced Boot Security Save & Exit Save Changes and Exit Discard Changes and Exit Exit system setup after saving the changes.
Häufig auftretende Probleme und ihre Lösungen Hardware-Problem - Optisches Laufwerk Das optische Laufwerk kann Datenträger nicht lesen oder brennen. 1. Aktualisieren Sie das BIOS auf die neueste Version und versuchen Sie es erneut. 2. Falls die Aktualisierung des BIOS nicht weiterhilft, versuchen Sie, Datenträger besserer Qualität zu verwenden. 3. Falls das Problem weiterhin besteht, wenden Sie sich an Ihr örtliches Service Center.
Hardware-Problem - Integrierte Kamera Die integrierte Kamera funktioniert nicht richtig. 1. Prüfen Sie im “Geräte-Manager”, ob ein Problem vorliegt. 2. Versuchen Sie, das Problem durch erneutes Installieren des Webkameratreibers zu beheben. 3. Falls das nicht hilft, aktualisieren Sie das BIOS auf die neueste Version und versuchen Sie es wieder. 4. Falls das Problem weiter auftritt, wenden Sie sich an Ihr örtliches Service Center. Hardware-Problem - Akku Akkupflege. 1.
Symptome & Lösungen: A. Das Problem liegt im Motherboard, der Festplatte oder dem Notebook selbst; wenden Sie sich an Ihr örtliches Service Center. B. Das Problem liegt im Betriebssystem; versuchen Sie, das System über die DVD oder die Wiederherstellungspartition wiederherzustellen. WICHTIG! Sichern Sie vor der Wiederherstellung all Ihre Daten auf einem externen Datenträger. C. Netzteilproblem; überprüfen Sie die Kabelverbindunden, wenden Sie sich für ein Ersatzteil an das örtliche Service Center.
VORSICHT: Verbinden Sie sich nicht mit dem Internet, bevor Sie ein Antivirenprogramm und eine Internet-Firewall installiert haben, um sich vor Computerviren zu schützen. Software-Problem - von ASUS mitgelieferte Software Beim Einschalten des Notebook-PCs erscheint eine Fehlermeldung “open policy file error”. A. Installieren Sie die neueste Version des “Power4 Gear”Programms. Sie finden es auf der ASUS-Webseite.
WICHTIG! Sichern Sie vor der Wiederherstellung all Ihre Daten auf einem externen Datenträger. VORSICHT: Verbinden Sie sich nicht mit dem Internet, bevor Sie ein Antivirenprogramm und eine Internet-Firewall installiert haben, um sich vor Computerviren zu schützen. Installieren Sie zuerst die Treiber “Intel INF Update” und “ATKACPI”, damit die Hardware-Geräte erkannt werden. 6. Falls das Problem weiter auftritt, wenden Sie sich an Ihr örtliches Service Center.
Software Problem - BIOS Aktualisieren des BIOS. 1. Stellen Sie die genaue Modellbezeichnung des NotebookPCs fest und laden Sie die neueste BIOS-Datei von der ASUSWebseite herunter. 2. Verbinden Sie Ihr USB-Laufwerk mit dem Notebook-PC und schalten Sie ihn ein. 3. Benutzen Sie die Funktion „Start Easy Flash“ im BIOS. Folgen Sie den nachstehenden Anweisungen. Aptio Setup Utility - Copyright (C) 2008 American Megatrends, Inc.
Wiederherstellen Ihres Notebook-PCs Benutzung der Wiederherstellungspartition Die Wiederherstellungspartition setzt die Software Ihres NotebookPCs schnell in den funktionierenden Werkszustand zurück. Bevor Sie die Wiederherstellungspartition verwenden, sollten Sie Ihre Dateien (z.B. Outlook PST-Dateien) auf Disketten oder einem Netzwerklaufwerk speichern und sich persönlich eingestellte Systemkonfigurationen (z.B. Netzwerkeinstellungen) notieren.
Recover Windows to entire HD. Diese Option löscht alle Partitionen auf Ihrer Festplatte und erstellt eine neue Systempartion als Laufwerk “C”. 6. Recover Windows to entire HD with two partitions. Diese Option löscht alle Partitionen auf Ihrer Festplatte und erstellt zwei neue Partitionen “C” (25%) und “D” (75%). Befolgen Sie die Bildschirmanweisungen, um den Wiederherstellungsvorgang abzuschließen. Besuchen Sie die ASUS-Webseite unter www.asus.com für die neusten Treiber und Hilfsprogramme.
Verwenden der Wiederherstellungs-DVD: 1. Legen Sie die Wiederherstellungs-DVD in das optische Laufwerk. Ihr Notebook-PC muss eingeschaltet sein. 2. Starten Sie den Computer neu und drücken Sie beim BootVorgang auf die Taste [Esc] und wählen Sie das optische Laufwerk (bezeichnet als “CD/DVD”) und drücken Sie die [Eingabetaste], um von der Wiederherstellungs-DVD zu booten. 3. Wählen OK, um die Wiederherstellung des Images zu starten: 4. Wählen OK, um die Systemwiederherstellung zu bestätigen.
DVD-ROM-Laufwerksinformationen Das Notebook wird mit einem optionalen DVD-ROM-Laufwerk oder einem CD-ROM-Laufwerk ausgeliefert. Zur Ansicht von DVDTiteln müssen Sie Ihre eigene DVD-Software installieren. Außerdem besteht die Möglichkeit, zusammen mit dem Notebook eine optionale DVD-Software zu kaufen. Das DVD-ROM-Laufwerk spielt sowohl CDs als auch DVDs ab.
Regionsdefinitionen Region 1 Kanada, USA, US-Territories Region 2 Tschechei, Ägypten, Finnland, Frankreich, Deutschland, Golfstaaten, Ungarn, Island, Iran, Irak, Irland, Italien, Japan, Holland, Norwegen, Polen, Portugal, Saudi-Arabien, Schottland, Südafrika, Spanien, Schweden, Schweiz, Syrien, Türkei, GB, Griechenland, ehemalige jugoslawische Republiken, Slovakei Region 3 Burma, Indonesien, Südkorea, Malaysia, Philippinen, Singapur, Taiwan, Thailand, Vietnam Region 4 Australien, Karibik (außer US-Territ
Internal Modem Compliancy The Notebook PC with internal modem model complies with JATE (Japan), FCC (US, Canada, Korea, Taiwan), and CTR21. The internal modem has been approved in accordance with Council Decision 98/482/EC for pan-European single terminal connection to the public switched telephone network (PSTN).
Network Compatibility Declaration Statement to be made by the manufacturer to the user: “This declaration will indicate the networks with which the equipment is designed to work and any notified networks with which the equipment may have inter-working difficulties. The manufacturer shall also associate a statement to make it clear where network compatibility is dependent on physical and software switch settings.
Diese Tabelle zeigt die Länder an, die zur Zeit den CTR21Standard anwenden.
This information was copied from CETECOM and is supplied without liability. For updates to this table, you may visit http://www.cetecom. de/technologies/ctr_21.html 1 National requirements will apply only if the equipment may use pulse dialling (manufacturers may state in the user guide that the equipment is only intended to support DTMF signalling, which would make any additional testing superfluous). In The Netherlands additional testing is required for series connection and caller ID facilities.
Erklärungen und Sicherheitshinweise Aussagen zur FCC-Erklärung Dieses Gerät entspricht Teil 15 der FCC-Vorschriften. Im Betrieb müssen die folgenden beiden Bedingungen erfüllt werden: • • Dieses Gerät darf keine schädliche Störstrahlung abgeben, und Dieses Gerät muss für empfangene Störstrahlung unempfindlich sein, auch für Störstrahlung, die unerwünschte Funktionen hervorrufen an. Dieses Gerät wurde geprüft und entspricht den Grenzwerten für digitale Geräte der Klasse B gemäß Teil 15 der FCC-Vorschriften.
(Nachdruck aus dem Code of Federal Regulations #47, Teil 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and Records Administration, U.S. Government Printing Office.) FCC-Sicherheitswarnungen zur RF-Aussetzung Veränderungen am Gerät, die nicht ausdrücklich vom Hersteller gebilligt wurden, können das Nutzungsrecht ungültig werden lassen.“Der Hersteller erklärt, dass dieses Gerät durch spezifische, in den USA geprüfte Firmware auf die Kanäle 1 bis 11 beschränkt ist.
CE-Kennzeichen CE-Zeichen für Geräte ohne Wireless LAN/Bluetooth Die ausgelieferte Version dieses Gerätes erfüllt die Anforderungen der EEC directives 2004/108/EC “Electromagnetic compatibility” und 2006/95/EC “Low voltage directive”. CE-Zeichen für Geräte mit Wireless LAN/ Bluetooth Diese Ausrüstung erfüllt die Anforderungen der Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.
Wireless-Kanäle für unterschiedliche Gebiete N. Amerika 2,412-2,462 GHz Kanal 01 bis Kanal 11 Japan 2,412-2,484 GHz Kanal 01 bis Kanal 14 Europa ETSI 2,412-2,472 GHz Kanal 01 bis Kanal 13 Verbotene Wireless-Frequenzbänder in Frankreich In einigen Gebiete in Frankreich sind bestimmte Frequenzbänder verboten.
�������������������������������������� 41 Loir et Cher 45 Loiret 50 Manche 55 Meuse 58 Nièvre 59 Nord 60 Oise 61 Orne 63 Puy du Dôme 64 Pyrénées Atlantique 66 Pyrénées Orient.
UL-Sicherheitshinweise Erforderlich für UL 1459 über Telekommunikations(Telefon)-Geräte, die für eine elektrische Verbindung mit einem Telekommunikationsnetzwerk, dessen Betriebsspannung zur Erde nicht 200V Spitze, 300V Spitzezu-Spitze und 105Vrms überschreitet, und für eine Installation und Verwendung entsprechend dem National Electrical Code (NFPA 70) ausgelegt sind.
Stromsicherheitsanforderungen Produkte mit einem elektrischen Strom von bis zu 6A und einem Gewicht über 3kg müssen geprüfte Netzkabel benutzen. Diese müssen mindestens folgende Werte aufweisen: H05VV-F, 3G, 0,75mm2 oder H05VV-F, 2G, 0,75mm2. TV-Tuner-Hinweis Hinweis für Kabel-TV-Installateure—Das Kabel-TV-System muss entsprechend den örtlichen Bestimmungen geerdet sein – die Installation sollte die Verbindung der Abschirmung mit dem Schutzleiter des Gebäudes am Eingang vorsehen.
Nordic-Vorsichtsmaßnahmen (für Lithium-Ionen-Akkus) CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. (English) ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente.
Sicherheitsinformationen für das optische Laufwerk Laser-Sicherheitsinformationen Interne oder externe optische Laufwerke, die mit diesem Notebook PC verkauft werden, enthalten ein Produkt der Laser Klasse 1. Laser-Klassifizierungen finden Sie im Anhang am Ende dieses Benutzerhandbuches. WARNUNG: Modifikationen oder Vorgehensweisen, die nicht in diesem Benutzerhandbuch beschrieben werden, können zu Belastung durch schädliche Laserstrahlung führen. Nehmen Sie das optische Laufwerk nicht auseinander.
Macrovision Corporation-Produktanmerkung Dieses Produkt verfügt über Kopierschutztechnologie, die durch methodische Anforderungen bestimmter U.S.A.-Patente und anderer geistiger Eigentumsrechte der Macrovision Corporation und anderer Parteien geschützt sind. Die Verwendung dieser Kopierschutztechnologie muss von Macrovision Corporation genehmigt werden und ist, wenn nicht anderweitig von der Macrovision Corporation genehmigt, nur für private oder eingeschränkte Vorführungszwecke vorgesehen.
CTR 21-Genehmigung (für Notebook-PCs mit ingebauten Modem) Danish Dutch English Finnish French German Greek Italian Portuguese A-32 Notebook-PC Benutzerhandbuch
Spanish Swedish Notebook-PC Benutzerhandbuch A-33
European Union Eco-Label Dieser Notebook-PC wurde mit den EU Flower-Label ausgezeichnet, was bedeutet, dass dieses Produkt die folgenden Kriterien erfüllt: 1. Verringerter Energieverbrauch während der Benutzung und im Standby-Modus. 2. Verminderte Verwendung giftiger Schwermetalle. 3. Verminderte Verwendung von für Umwelt und Gesundheit schädlicher Stoffe. 4. Reduzierte Verwendung natürlicher Ressourcen durch vielversprechende Wiederverwertung. 5.
Erklärung zur Erfüllung der weltweiten Umweltschutzbestimmungen ASUS folgt dem Green-Design-Konzept, um unsere Produkte zu entwickeln und zu produzieren und versichert, dass jede Stufe des ASUS-Produktkreislaufs die weltweiten Umweltschutzbestimmungen erfüllt. Zusätzlich veröffentlicht ASUS die relevanten und auf den Bestimmungsanforderungen basierenden Informationen. Besuchen Sie bitte die Webseite http://csr.asus.com/english/ Compliance.
Dieses Produkt ist durch ein oder mehrere der folgenden U.S.
Urheberrechtinformationen Kein Teil dieses Handbuchs, einschließlich der darin beschriebenen Produkte und Software, darf ohne ausdrückliche schriftliche Genehmigung von ASUSTeK COMPUTER INC. (“ASUS”) mit jeglichen Mitteln in jeglicher Form reproduziert, übertragen, transkribiert, in Wiederaufrufsystemen gespeichert oder in jegliche Sprache übersetzt werden, abgesehen von vom Käufer als Sicherungskopie angelegter Dokumentation.
Eingeschränkte Haftbarkeit Es können Sachverhalte auftreten, bei denen Sie aufgrund eines Fehler seitens ASUS oder anderer Haftbarkeiten berechtigt sind, Schadensersatz von ASUS zu fordern.
Notebook-PC Benutzerhandbuch A-39
Hersteller Adresse, Stadt ASUSTek COMPUTER INC. No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C Land TAIWAN Authorisierte Niederlassung in Europe ASUS COMPUTER GmbH Adresse, Stadt HARKORT STR.