FI6951 Kannettavan tietokoneen käyttöopas Helmikuu 2012
Sisältö Sisältö ...................................................................................................................... 2 Kappale 1: Kannettavan esittely Tietoja tästä käyttöoppaasta........................................................................... 6 Huomautuksia tästä käyttöoppaasta........................................................... 6 Turvallisuus- ja varotoimenpiteet................................................................. 7 Kannettavan valmistelu..............
Pikanäppäimen käyttö....................................................................................47 Pikanäppäimen käyttö ensimmäistä kertaa..........................................47 Kappale 4: Kannettavan käyttö Touchpadin käyttö..........................................................................................53 Touchpad-käytön kuvitus.............................................................................54 Touchpadin ylläpito......................................................
CE-merkkivaroitus....................................................................................... L-28 IC-säteilyaltistumislausunto Kanadaa varten.................................... L-28 Langaton käyttökanava eri alueilla....................................................... L-29 Ranskan rajoitetut langattoman taajuuskaistat............................... L-29 UL-turvallisuushuomautukset................................................................ L-31 Virtaturvallisuusvaatimus..................
1 Kannettavan esittely
Tietoja tästä käyttöoppaasta Luet kannettavan käyttöopasta. Tämä käyttöopas antaa tietoja kannettavan eri osista ja siitä, miten niitä käytetään. Seuraavat ovat suurimmat osiot tässä käyttöoppaassa: 1. Kannettavan esittely Esittelee sinulle kannettavan ja tämän käyttöoppaan. 2. Osien tunteminen Antaa sinulle tietoja kannettavan osista. 3. Aloitus Antaa sinulle tietoja kannettavan käyttöönotosta. 4. Kannettavan käyttö Antaa sinulle tietoja kannettavan osien käytöstä. 5.
Turvallisuus- ja varotoimenpiteet Seuraavat turvallisuus-ja varotoimenpiteet pidentävä kannettavan elinikää. Seuraa kaikkia varotoimenpiteitä ja ohjeita. Tämän ohjekirjan kuvaamia huoltotoimenpiteitä lukuun ottamatta kaikki huolto tulee jättää päteville huoltajille. Irrota virtajohto ja poista akkupakkaus ennen puhdistusta.
LÄMPÖTILA: Tätä kannettavaa tulisi käyttää vain ympäristössä, jonka lämpötila on välillä 5°C (41°F) ja 35°C (95°F). SYÖTTÖNOPEUS: Tarkista nopeus kannettavan pohjassa olevasta kilvestä ja varmista, että virtasovitin on yhdenmukainen nopeuden kanssa. ÄLÄ kanna tai peitä päälle kytkettyä kannettavaa tä materiaaleilla, jotka voivat estää ilmanvaihdon (esim. tietokonelaukku). ÄLÄ käytä vahvoja liuottimia, kuten tinneriä, bentseeniä tai muita kemikaaleja pinnalla tai sen lähellä.
Äänenpainevaroitus Liiallinen äänenpaine korva- tai pääkuulokkeista voi aiheuttaa kuulovammoja tai kuulon heikkenemisen. Huomaa, että äänenvoimakkuuden ja taajuuskorjaimen säätö keskialueen yläpuolelle voi nostaa kuulokkeiden antojännitettä, ja siten myös äänenpainetta. DC-tuuletinvaroitus Huomaa, että tasasähkötuuletin on liikkuva osa ja voi siksi olla vaarallinen. Älä mene lähelle tuulettimen liikkuvia siipiä. Adapteritiedot Tulojännite: 100–240 VAC Tulotaajuus: 50–60Hz Nimellisantovirta: 4.
Suojaa kannettavasi Voit ostaa erillisen kantolaukun suojellaksesi laitetta lialta, vedeltä, tärähdyksiltä ja naarmuuntumiselta. Akkujen lataaminen Jos aiot käyttää akun virtaa, lataa akku ja mahdolliset lisäakut täyteen ennen kuin lähdet pitkälle matkalle. Muista, että muuntaja lataa akkuja aina kun se on kytketty tietokoneeseen ja virtalähteeseen. Huomaa, että akun lataaminen kestää paljon pidempään kun kannettava on käytössä.
Kannettavan valmistelu Tässä on lyhyet ohjeet kannettavan käyttöä varten.
LCD-näyttöpaneelin avaaminen 1. Nosta varovasti näyttöpaneelia peukalollasi. 2. Taita hitaasti näyttöpaneelia eteen- tai taaksepäin mukavaa katselukulmaa varten. Virran kytkeminen 1. Paina ja vapauta virtapainike, joka sijaitsee LCD-näyttöpaneelin alla. 2. Säädä LCD-näytön kirkkautta painamalla [Fn]+[F5] tai [Fn]+[F6].
2 Osien tunteminen
Yläosa Näppäimistö on erilainen eri alueilla.
1 Mikrofoni (sisäinen) Sisäänrakennettua monomikrofonia voidaan käyttää videoneuvotteluihin, äänikerrontaan tai ääninauhoituksiin. 2 Kamera Sisäänrakennettu kamera mahdollistaa kuvien ottamisen tai videon nauhoittamisen. Kameraa voidaan käyttää äänineuvotteluissa ja muissa vuorovaikutteisissa sovelluksissa. 3 Kameran merkkivalo Kameran merkkivalo näyttää, kun sisäänrakennettu kamera on käytössä. 4 Näyttöpaneeli Näyttöpaneeli toimii samalla tavalla kuin työpöytänäyttö.
7 Näppäimistö Näppäimistössä on täysikokoiset näppäimet, joissa on mukava painallussyvyys, sekä kämmentuet molemmille käsille. Kaksi Windows -toimintonäppäintä on mukana helppoa Windows -käyttöjärjestelmässä navigointia varten. 8 Kosketuslevy ja -painikkeet 9 Tilaosoittimet (etuosa) 16 Kosketuslevy ja sen painikkeet ovat ohjauslaite, joka tarjoaa samat toiminnot kuin työpöytähiiri.
Alapuoli Alapuolen ulkomuoto saattaa vaihdella mallin mukaan. Akkuyksikön koko vaihtelee mallista riippuen. VAROITUS! Kannettavan alapuoli voi lämmetä erittäin kuumaksi. Käsittele kannettavavarovasti, kun se on tai on hiljattain ollut käytössä. Lämpötilan kohoaminen latauksen tai käytön aikana on normaalia. ÄLÄ KÄYTÄ LAITETTA PEHMEÄLLÄ ALUSTALLA, KUTEN SÄNGYLLÄ TAI SOHVALLA, KOSKA ILMANVAIHTOAUKOT VOIVAT TUKKEUTUA. ÄLÄ PIDÄ KANNETAVAA SYLISSÄSI TAI MUUALLA VARTALOLLA, KOSKA KUUMUUS VOI AIHEUTTAA VAHINKOA.
1 Akun lukko - Jousi 2 3 18 Akun jousilukkoa käytetään pitämään akku varmasti paikallaan. Kun akku asetetaan paikalleen, se lukittuu automaattisesti. Tämä jousilukko tulee pitää avoimessa asennossa kun akku halutaan poistaa. Kiintolevylokero 4 Akku Akkuyksikkö latautuu automaattisesti, kun kannettava PC on kytkettynä verkkovirtaan, ja pitää kannettavan PC:n päällä, kun verkkovirtaa ei ole kytketty. Tämä mahdollistaa käytön siirryttäessä paikasta toiseen.
Oikea puoli 1 2 1 4 5 6 7 8 Kuulokelähtö Combo 2 3 Stereokuulokeliitäntää (1/8 tuumaa) käytetään yhdistämään kannettavan audiolähtösignaali vahvistettuihin kaiuttimiin tai kuulokkeisiin. Tämän liitännän käyttö ottaa automaattisesti sisäänrakennetut kaiuttimet pois käytöstä. SPDIF-lähtöliitäntä Tämä liitäntä tarjoaa liitännän SPDIF (Sony/Philips Digital Interface) -yhteensopiviin laitteisiin digitaalista äänilähtöä varten.
4 Optinen asema Kannettavaa on saatavilla eri malleina, joissa on eri optiset asemat. Kannettavan optinen asema voi tukea CD-levyjä ja/tai DVD-levyjä ja se saattaa kyetä tallennukseen (R) tai toistuvaan tallennukseen (RW). Katso markkinointitiedoista lisätietoja kunkin mallin kohdalla. 5 Optisen aseman sähköinen avaaminen Optisessa asemassa on sähköinen avauspainike kelkan avaamista varten.
Vasen puoli 1 1 2 3 4 5 6 7 Subwoofer-liitäntä (tietyissä malleissa) Valmistajakohtaista subwoofer-liitäntää käytetään VAIN Notebook PC:n mukana toimitettavan subwooferin liittämiseen. Subwooferin avulla voit nauttia multimediasovelluksiesi upeista bassoäänistä (matalista taajuuksista). ÄLÄ liitä muita laitteita tähän liitäntään, sillä se voi vaurioittaa subwoofer-liitäntää tai Notebook PC:tä.
5 HDMI-portti HDMI (High-Definition Multimedia Interface) on pakkaamaton, täysin digitaalinen audio/video-liittymä minkä tahansa audio/video-lähteen välillä, kuten tvsovittimen, DVD-soittimen, ja A/V-vastaanottimen sekä audio- ja/tai videomonitorin, kuten esimerkiksi digitaalisen television (DTV). Tukee standardinmukaista, parannettua, tai teräväpiirtovideota, sekä monikanavaista digitaaliaudiota samassa kaapelissa.
Takaosa 1 1 Akku Akkuyksikkö latautuu automaattisesti, kun kannettava PC on kytkettynä verkkovirtaan, ja pitää kannettavan PC:n päällä, kun verkkovirtaa ei ole kytketty. Tämä mahdollistaa käytön siirryttäessä paikasta toiseen. Akun kesto määräytyy käytön ja kannettavan teknisten tietojen mukaan. Akkua ei saa purkaa, ja se myydään erillisenä yksikkönä.
Subwooferin liittäminen Notebook PC:n mukana toimitettava subwoofer on pienikokoinen ja helppo kuljettaa. Yhdistämällä subwooferin Notebook PC:n erityiseen subwoofer-liitäntään pääset nauttimaan multimediasovelluksiesi upeista bassoäänistä (matalista taajuuksista). ÄLÄ liitä tätä valmistajakohtaista subwooferia väkisin muihin ääniliitäntöihin, vaan liitä se ainoastaan käyttöoppaassa kuvattuun erityiseen subwoofer-liitäntään. Muuten subwoofer tai ääniliitäntä voi vaurioitua.
3 Aloitus
Virtajärjestelmä Virran käyttö Kannettavan virta koostuu kahdesta osasta, virtamuuntajasta ja akkujärjestelmästä. Virtamuuntaja muuntaa seinäpistokkeen vaihtovirran kannettavan vaatimaksi tasavirraksi. Kannettavan mukana tulee universaali vaihtovirta-tasavirtamuuntaja. Se tarkoittaa, että voit kytkeä virtajohdon niin 100–120 V -pistokkeeseen kuin 220–240 V -pistokkeeseen ilman, että tarvitsee asettaa kytkimiä tai virranmuuntajia.
TÄRKEÄÄ! Seurauksena voi olla vahinkoa laitteelle, jos käytät eri muuntajaa tai käytät kannettavan muuntajaa muiden laitteiden kanssa. Jos muuntajasta tulee savua, palaneen haju tai äärimmäistä lämpöä, ota yhteys huoltoon. Ota yhteys huoltoon jos epäilet vikaa muuntajassa. Voit vahingoittaa sekä akkua että kannettavaa viallisella muuntajalla. Kannettava tulee joko kaksi- tai kolmipiikkisen pistokkeen kanssa alueen mukaisesti.
Akun käyttö Kannettava on suunniteltu toimimaan poistettavan akun kanssa. Akku koostuu useista yhteen sijoitetuista akkukennoista. Täyteen ladattu akku tarjoaa muutaman tunnin akun keston, jota voi pidentää käyttämällä BIOS-asetusten virransäästötoimintoja. Lisäakut ovat lisävaruste ja niitä voi ostaa erillisinä kannettavan myyjältä. Akun asentaminen ja poistaminen 1 2 valmiiksi asennettuna.
Akun irrottaminen: 1 2 TÄRKEÄÄ! Käytä vain kannettavan mukana tulleita tai erityisesti valmistajan tai myyjän tämän mallin kanssa käytettäväksi hyväksymiä akkuja ja muuntajia, tai muuten 2 kannettava voi vahingoittua. 1 Akusta huolehtiminen Kannettavan akulla, kuten kaikilla akuilla, on rajoitettu määrä latauskertoja. Akun käyttöikä riippuu ympäröivästä lämpötilasta, kosteudesta ja kannettavan käyttötavasta. Paras olisi, jos akkua käytettäisiin lämpötilassa välillä 5°C ja 35°C (41°F ja 95°F).
Kannettavan kytkeminen päälle Kannettavan virtailmoitus tulee näyttöön kun se kytketään päälle. Jos tarpeen, voit säätää kirkkautta pikanäppäimillä. Jos sinun tarvitsee ajaa BIOS-asetukset järjestelmän asetusten asettamiseksi tai muuttamiseksi, paina käynnistyksen aikana [F2]. Jos painat [Tab]-painiketta aloitusruudun aikana, ruutuun tulee tavallisia käynnistystietoja, kuten BIOS-versio.
Self Monitoring ja Reporting Technology S.M.A.R.T.-tekniikka (Self Monitoring and Reporting Technology) tarkistaa kiintolevyn POST-testin aikana ja antaa varoituksen, jos kiintolevy tarvitsee huoltoa. Jos käynnistyksen aikana tulee jokin kriittinen kiintolevyvaroitus, ota tiedoistasi välittömästi varmuuskopio ja käynnistä Windowsin levyntarkistusohjelma.
Akun virran tarkistaminen Akkujärjestelmä käyttää Smart Battery -standardia Windowsympäristössä, mikä mahdollistaa akun kertovan tarkasti jäljellä olevan varausprosentin. Täyteen ladattu akku tarjoaa kannettavalle muutaman tunnin käyttövirtaa. Todellinen lukema muuttuu sen mukaan, miten järjestelmä käyttää virransäästöominaisuuksia, miten työskentelet, millainen prosessori on, paljonko muistia on ja minkä kokoinen näyttöpaneeli on.
Akun lataaminen Ennen kuin käytät kannettavaa tien päällä, akku tulee ladata. Akku alkaa latautua heti kun kannettava kytketään ulkoiseen virtalähteeseen muuntajan avulla. Lataa akku täyteen ennen ensimmäistä käyttöä. Uusi akku tulee ladata kokonaan ennen kuin kannettava irrotetaan ulkoisesta virtalähteestä. Akun latautuminen täyteen kestää muutaman tunnin kun kannettava on pois päältä, ja saattaa viedä kaksi kertaa niin kauan kun kannettava on päällä. Akun latausvalo sammuu kun akku on latautunut.
Virranhallinta-asetukset Virtakytkin kääntää kannettavan virran PÄÄLLE ja POIS tai panee kannettavan lepotilaan tai -tiloihin. Virtakytkimen todellinen toiminta voidaan mukauttaa Windows >Windows ohjauspaneeli > Virranhallintaasetukset. Muille valinnoille, kuten “Vaihda käyttäjä, Käynnistä uudelleen, Lepotila, tai Sammuta,” napsauta nuolenpäätä lukitsemiskuvakkeen vierssä. Uudelleenkäynnistäminen Kun muutoksia on tehty käyttöjärjestelmään, kone saatetaan pyytää käynnistämään uudelleen.
Hämäsammutus Jos käyttöjärjestelmäsi ei pysty kunnolla sammumaan tai käynnistymään uudelleen, on kaksi muuta tapaa sammuttaa kannettava: • Pidä virtapainiketta pohjassa yli 4 sekuntia. TÄRKEÄÄ! Älä käytä hätäsammutusta kun tietoja tallennetaan, sillä se voi aiheuttaa tietojen häviämisen tai tuhoutumisen.
Virranhallintatilat Kannettavassa on useita automaattisia tai säädettäviä virransäästöominaisuuksia, joita voit käyttää akun keston maksimoimiseksi ja vähentää kokonaiskäyttökustannuksia. Voit hallita joitakin näistä ominaisuuksista BIOS-asetusten virtavalikosta. ACPI-virranhallintaasetukset tehdään käyttöjärjestelmän kautta.
“Lepotila” on sama kuin muistiin tallennus (Suspend-to-RAM, STR). Tämä toiminta tallentaa nykyiset tietosi ja tilasi muistiin, ja monet osat kytketään pois päältä. Koska RAM-muisti on epävakaata, tietojen säilyttäminen (päivittäminen) vaatii virtaa. Napsauta Windows -painiketta ja nuolenpäätä lukkokuvakkeen vieressä tämän valinnan näkemiseksi. Voit myös käyttää näppäimistön pikanäppäintä [Fn F1] tämän tilan aktivoimiseksi. Palauta painamalla mitä tahansa näppäimistön näppäintä paitsi [Fn].
Lämmön virranhallinta Kannettavan lämpötilan hallintaan on kolme virranhallintakeinoa. Käyttäjä ei voi säätää näitä virranhallintakeinoja, mutta ne tulisi tuntea siltä varalta, että kannettava menisi johonkin näistä tiloista. Seuraavat lämpötilat viittaavat rungon lämpötilaan, eivät prosessorin. • • • 38 Tuuletin menee päälle aktiivista jäähdytystä varten kun lämpötila saavuttaa turvallisen ylärajan. Prosessorin nopeus hidastuu passiivista jäähdytystä varten kun lämpötila ylittää turvallisen ylärajan.
Erityisnäppäinten toiminnot Värilliset pikanäppäimet (tietyissä malleissa) Seuraavassa kerrotaan kannettavan näppäimistön värillisistä pikanäppäimistä. Värillisiä komentoja voi käyttää vain painamalla ensin pohjaan toimintonäppäimen ja sitten painamalla näppäintä, jossa on värikomento. Pikanäppäinten sijainnit voivat muuttua mallin mukaan, mutta toimintojen pitäisi olla samat. Seuraa kuvakkeita funktionäppäinten sijaan.
LCD/näyttö-kuvake (F8): Vaihtaa kannettavan LCDnäytön ja ulkoisen näytön välillä tässä järjestyksessä: Vain LCD -> External Monitor (Vain CRT, ulkoinen näyttö) -> LCD + CRT-kopio -> LCD + CRT-laajennus. (Tämä toiminto ei toimi 256-värisessä tilassa, laita enemmän värejä käyttöön näytön asetuksista.) HUOMAUTUS: Ulkoinen näyttömonitori täytyy liittää “ennen” käynnistämistä.
Fn+C: Kytkee “Splendid Video Intelligent Technology” -toiminnon päälle ja pois päältä. Tämä mahdollistaa näytön eri värienparannustilojen välillä vaihtamisen, jotta kontrastin, kirkkauden, ihonsävyn sekä punaisen, vihreän ja sinisen värikylläisyyttä voisi säätää erikseen. Voit katsoa nykyisen tilan kuvaruutunäytöstä. Fn+V (tietyissä malleissa): Vaihtaa “Life Frame” -ohjelmistosovellukseen. Joissakin malleissa tämä toiminto on käytettävissä vain, kun kamera on kytkettynä päälle.
Microsoft Windows-näppäimet Näppäimistössä on kaksi erityistä Windows-painiketta alla olevan kuvauksen mukaisesti. Näppäin, jossa on Windows-logo, aktivoi Windowstyöpöydän vasemmassa alakulmassa olevan Käynnistävalikon. Toinen näppäin, joka näyttää Windows-valikolta pienen osoittimen kanssa, aktivoi ominaisuudet-valikon ja vastaa hiiren oikean painikkeen painamista Windows-kohteen päällä.
Multimediaohjausnäppäimet Multimediaohjausnäppäinten avulla voit hallita multimediasovellusta helposti. Kannettava:n multimediaohjausnäppäinten käyttö on esitelty alla. Jotkut ohjausnäppäimien toiminnot saattavat olla erilaiset kannettavan PC:n mallista riippuen. Voit hallita CD-toimintoja käyttämällä [Fn]-näppäintä yhdessä nuolinäppäinten kanssa. CD Toisto/Tauko Kun CD-levy on pysäytetty, aloittaa CD-soiton. Kun CD-levyä toistetaan, aittaa CD-soiton tauolle.
Kytkimet ja tilaosoittimet Kytkimet Virtakytkin 44 Virtakytkin mahdollistaa kannettavan tietokoneen kytkemisen päälle ja pois päältä sekä palautumisen lepotilasta. Paina virtapainiketta kerran kytkeäksesi kannettavan tietokoneen päälle ja kerran sammuttaaksesi sen. Virtakytkin toimii vain, kun näyttöpaneeli on auki.
Tilaosoittimet Virran merkkivalo Vihreä merkkivalo osoittaa, että kannettava on päällä, ja se vilkkuu hitaasti, kun kannettava on muistiin tallennetussa tilassa (valmiustila). Merkkivalo on pois päältä kun kannettava on pois päältä tai levylle tallennetussa tilassa (lepotila). Akun varaustilan osoitin (kaksivärinen) Kaksivärinen akun ilmaisin näyttää akun varaustilan seuraavasti: Vihreä palaa: Akkuvaraus on 95 % - 100 % (verkkovirralla).
Levyn käytön osoitin Osoittaa, että kannettava käyttää yhtä tai useampaa muistilaitetta, kuten kiintolevyä. Valo vilkkuu siirtoaikaan suhteutettuna. Bluetooth / Langaton merkkivalo Tämä koskee vain malleja, joissa on sisäinen Bluetooth (BT) ja sisäänrakennettu langaton lähiverkko (LAN). Tämän merkkivalon syttyminen osoittaa, että kannettavan tietokoneen sisäänrakennettu Bluetooth (BT) -toiminto on aktivoitu. Tämä koskee vain malleja, joissa on sisäänrakennettu langaton LAN.
Pikanäppäimen käyttö Paina Pikanäppäin-painiketta aktivoidaksesi nopeasti esiasetetun Pikanäppäin-toiminnon. Voit määrittää yhden Pikanäppäin-toiminnon kerrallaan. Pikanäppäimen käyttö ensimmäistä kertaa Kun painat Pikanäppäintä ensimmäistä kertaa, Tervetuloa-näyttö tulee näkyviin avuksi pikanäppäintoimintojen määrittämiseen. Pikanäppäimen käyttö ensimmäistä kertaa: 1. Paina virtapainikkeen vastakkaisella puolella olevaa pikanäppäintä.
2. Käynnistä asetusnäyttö napsauttamalla Tervetuloa-näytössä Aseta-painiketta. 3. Napsauta asetusnäytössä mitä tahansa kuvaketta, määritä asetus ja napsauta sitten Käytä-painiketta. Napsauta nuolia selataksesi määritettäviä Pikanäppäintoimintoja.
Voit määrittää seuraavat pikanäppäintoiminnot: Toiminto Kuvaus Äänenvoimakkuuden vaimennin Säätää äänenvoimakkuuden tasoa ylös/alas tai asettaa mykistystilan. Pikasovellus Käynnistää nopeasti usein käyttämäsi sovelluksen tai office-tiedostot. Pika-web Käynnistää nopeasti suosikki-web-sivustosi. Splendid-esiasetus Antaa valita kuudesta värikkäästä näyttöesiasetuksesta. Video Magic Käynnistää nopeasti Video Magic -sovelluksen videon toistamista, muokkaamista ja muodon muuntamista varten.
Toiminto Kuvaus Näytön valitsin Vaihtaa nopeasti kannettavan, ulkoisen näytön ja kaksoisnäytön välillä. Tämä toiminto toimii samoin kuin + -näppäinyhdistelmä, joka on Kosketuslevy-LCD: n/Näytön vaihtamisen toimintonäppäin. Langaton yhdistettävyys Antaa ottaa Wi-Fi- ja Bluetooth-yhteyden käyttöön tai pois käytöstä. Tämä toiminto toimii samoin kuin + -näppäinyhdistelmä, joka on WLAN/ Bluetooth-vaihdon toimintonäppäin.
4 Kannettavan käyttö
Osoitinlaite Kannettavan tietokoneen integroitu touchpad-osoitinlaite on paineherkkä, eikä siinä ole liikkuvia osia. Laiteohjain vaaditaan vielä käytettäessä joitakin sovellusohjelmistoja. Kakkospainikkeen painallus (alue pisteviivan ulkopuolella) Ykköspainikkeen painallus (alue pisteviivan sisällä) ÄLÄ käytä mitään esinettä sormen asemesta touchpadia käyttäessäsi. Tällaiset esineet voivat vahingoittaa touchpadin pintaa.
Touchpadin käyttö Touchpad on vuorovaikutteinen laite, joka simuloi tavallisen hiiren toimintoja. Se mahdollistaa yhden sormen ja monen sormen eleiden käytön osoittimen siirtämiseksi niin, että voit valita ja napsauttaa kohteita, kiertää ja zoomata kuvia, vierittää luetteloita ja pyyhkäistä ja vaihtaa ikkunoiden välillä.
Touchpad-käytön kuvitus Napauttaminen - Touchpadin napauttaminen mahdollistaa kohteiden valitsemisen näyttöruudulta ja tiedostojen avaamisen. Valitse kohde napsauttamalla kerran. Avaa kohde napauttamalla kahdesti. Napsauttaminen - Touchpadin napsauttaminen simuloi hiiren vasemman ja oikean painikkeen toimintoja. Vasen napsautus Napsauta kerran valitaksesi kohteen ja avaa kohde kaksoisnapsauttamalla sitä. Oikea napsautus Valitse kohde napsauttamalla sitä kerran ja katso sen valikkovaihtoehdot.
Kiertäminen - Kuvia kierretään Touchpadissa myötä- tai vastapäivään nipistyseleellä. Aseta kaksi sormea touchpadille ja kierrä pyöreä liike kiertääksesi kuvaa joko myötä- tai vastapäivään. Vieritys - Voit vierittää touchpadin luetteloita pysty- ja vaakasuunnassa käyttämällä kahta sormea. Voit ottaa käyttöön jatkuvan vierityksen pitämällä kahta sormea touchpadin reunalla, kun haluat siirtyä ylhäältä alas / vasemmalta oikealle ja päin vastoin.
Kolmen sormen pyyhkäisy - Käyttämällä kolmea sormea touchpadilla voit pyyhkäistä sivuja vasemmalta oikealle tai oikealta vasemmalle. Voit käyttää tätä elettä myös työpöydän aktiivisten ikkunoiden välillä vaihtamiseen. Touchpadin ylläpito Touchpad on paineherkkä. Jos touchpadin ylläpito laiminlyödään, se voi vahingoittua helposti. Huomioi seuraavat varotoimet. • Varmista, ettei touchpad joudu kosketuksiin lian, nesteiden tai rasvan kanssa. • Älä kosketa touchpadia, jos sormesi ovat likaiset tai kosteat.
Touchpadin ottaminen pois käytöstä automaattisesti Voit ottaa touchpadin automaattisesti pois käytöstä, kun liitetään ulkoinen USB-hiiri. Touchpadin ottaminen pois käytöstä: 1. Siirry Ohjauspaneeliin. Vaihda katsomisasetukseksi Suuret kuvakkeet ja valitse sitten Hiiri. 2. Valitse ELAN-välilehti. 3. Valitse valintaruutu vaihtoehdon Ota pois käytöstä, kun liitetään ulkoinen osoitinlaite vieressä. 4. Tallenna nykyiset muutokset valitsemalla Käytä tai valitse OK tallentaaksesi ja poistuaksesi.
Tallennuslaitteet Tallennuslaitteet mahdollistavat kannettavan lukevan ja tallentavan asiakirjoja, kuvia ja muita tiedostoja erilaisille tallennuslaitteille. Optinen asema (tietyissä malleissa) Optisen levyn asentaminen 1. Kun kannettavan virta on päällä, paina aseman avauspainiketta ja kelkka avautuu osittain. 2. Vedä varovasti aseman etupaneelista ja vedä kelkka kokonaan auki. Varo, ettet kosketa CD-aseman linssiä tai muita mekanismeja. Varmista, että mikään ei voi mennä jumiin aseman kelkan alle.
3. Pidä levystä kiinni reunoilta ja levyn kuvapuoli ylöspäin. Työnnä alas levyn keskikohdan molemmilta puolilta, kunnes levy napsahtaa keskipisteeseen. Keskipisteen tulisi olla levyä korkeammalla kun levy on oikein asetettu. 4. Työnnä levykelkka hitaasti takaisin sisään. Asema alkaa lukea levyn sisällysluetteloa. Kun asema pysähtyy, levy on valmis käytettäväksi. On tavallista, että CD-levyn nopea pyöriminen asemassa sekä kuuluu että tuntuu, kun tietoja luetaan.
Optisen levyn poistaminen Avaa kelkka ja nosta levyn reunaa varovasti ylöspäin niin, että saat sen irti keskipisteestä. Hätäavaus Hätäavaus sijaitsee optisen aseman reiässä ja sitä käytetään optisen aseman kelkan avaamisen siinä tapauksessa, että sähköinen avaus ei toimi. Älä käytä hätäavausta sähköisen avauksen sijaan. Huomautus: Varo, ettet tökkää käytön merkkivaloa, joka sijaitsee samalla alueella.
Optisen aseman käyttö Optisia levyjä ja laitteita tulee käsitellä varoen, sillä ne käyttävät hienovaraista tekniikkaa. Pidä mielessä CD-toimittajan tärkeät turvallisuusohjeet. Toisin kuin työpöytäkoneiden optiset asemat, kannettava käyttää keskipistettä CD-levyn paikallaan pitämiseen niin, että kulmalla ei ole merkitystä. Kun CD-levy asetetaan asemaan, on tärkeää, että CD-levy painetaan keskipisteeseen tai muuten optinen kelkka naarmuttaa CD-levyä.
Muistikortin lukija Tavallisesti tarvitsee ostaa erikseen PCMCIA-muistikortinlukija, jos haluaa käyttää muistikorttia esimerkiksi digikamerasta, MP3-soittimesta, kännykästä tai kämmentietokoneesta. Tässä kannettavassa PC:ssä on yksittäinen sisäänrakennettu muistikortinlukija, joka voi käyttää monia flash-muistikortteja kuten alla olevassa esimerkissä näytetään.
Kiintolevy Kiintolevyasemien suorituskyky on suurempi, ja ne toimivat huomattavasti nopeammin kuin levykeasemat ja optiset levyasemat. Kannettava PC tulee vaihdettavissa olevan kovalevyaseman kanssa. Nykyiset kiintolevyasemat tukevat S.M.A.R.T.-tekniikkaa (Self Monitoring and Reporting Technology), jonka avulla ne tunnistavat kiintolevyvirheet tai toimintahäiriöt, ennen kuin virheet tapahtuvat.
Kiintolevyasemien paikallistaminen Kovalevyaseman poisto 1 1 2 2 2 2 1 1 1 1 2 2 64 Kannettavan tietokoneen käyttöopas
Kovalevyaseman asennus 2 1 2 2 1 2 1 Kannettavan tietokoneen käyttöopas 65
Muisti (RAM) Lisämuisti kasvattaa sovelluksen suorituskykyä alentamalla kovalevyhakua. Kysy tietoja kannettavasi muistin päivityksestä valtuutetusta palvelukeskuksesta tai jälleenmyyjältä. Osta laajennusmoduuleita vain tämän kannettavan valtuutetuilta myyjiltä, jotta paras mahdollinen yhteensopivuus ja luotettavuus voitaisiin taata. BIOS havaitsee automaattisesti järjestelmään asennetun muistin määrän ja konfiguroi CMOS-muistin sen mukaisesti POST (Power-OnSelf-Test) prosessin aikana.
Yhteydet Sisäänrakennettua modeemia ja verkkoa ei voi asentaa myöhemmin päivityksinä. Ostamisen jälkeen modeemi ja/tai verkko voidaan asentaa PC-korttina. Verkkoyhteys Kytke verkkokaapeli, jossa on RJ-45-liittimet molemmissa päissä, kannettavan verkkoporttiin ja toinen pää keskittimeen tai kytkimeen. 100 BASE-TX/1000 BASE-T -nopeuksia varten verkkokaapelin tulee olla kategorian 5 tai paremman (ei kategoria 3) kierretty parikaapeli.
Kierretty parikaapeli Kaapelia, jota käytetään Ethernet-kortin yhdistämiseen isäntään (yleensä keskitin tai kytkin), kutsutaan kierretyksi Ethernetparikaapeliksi. Liittimiä kutsutaan RJ-45-liittimiksi, jotka eivät ole yhteensopivia RJ-11-puhelinliittimien kanssa. Jos kaksi tietokonetta kytketään yhteen ilman, että välissä on keskitin, verkkokaapelin tulee olla ristiinkytketty (FastEthernet-malli). (Gigabit-mallit tukevat automaattista ohitusta, joten LAN-ohituskaapeli on valinnainen.
Langaton LAN-yhteys (tietyissä malleissa) Valinnainen, sisäänrakennettu langaton LAN on helppokäyttöinen langaton Ethernet-sovitin. Langattoman LAN:n (WLAN) IEEE 802.11 –standardia käyttävä valinnainen, sisäänrakennettu langaton LAN pystyy siirtämään dataa nopeasti DSSS-suorasekvensoinnin ja OFDMmodulointitekniikan avulla 2,4G Hz/5 GHz taajuuksilla. Valinnainen sisäänrakennettu langaton LAN on alaspäin yhteensopiva aiempien IEEE 802.
Ad hoc –tila Ad hoc –tilan avulla voit yhdistää Kannettavan:n muihin langattomiin laitteisiin. Kyseisessä langattomassa ympäristössä ei tarvita yhteyspistettä. (Kaikkiin laitteisiin on asennettava valinnaiset langattomat 802.11-LANsovittimet.
Windows langattoman verkon liitäntä Liittäminen verkkoon 1. Kytke Päälle Langaton kytkin, jos se tarvitaan malliasi varten (katso kytkimet Osassa 3). 2. Paina [FN+F2] jatkuvasti kunnes wireless LAN -kuvake ja Bluetooth - kuvake näytetään. Tai kaksoisnapsauta Langaton konsoli -kuvaketta Windowsin ilmoitusalueella ja valitse wireless LAN -kuvake. 3. Napsauta Windows®-ilmaisinalueelta langattoman verkon kuvaketta, jossa on oranssi tähti . 4.
5. Yhdistettäessä ohjelma voi kysyä salasanaa. 6. Kun yhteys on muodostettu, se näkyy luettelossa. 7. Langattoman verkkoyhteyden kuvake näkyy käyttöjärjestelmän tehtäväpalkissa. Ylivedetty langattoman verkon kuvake tulee näkyviin, kun otat WLAN-toiminnon pois käytöstä painamalla + .
Langaton Bluetooth-liitäntä (tietyissä malleissa) Langatonta Bluetooth-teknologiaa käyttävissä kannettavissa tietokoneissa ei tarvita kaapeleita Bluetooth-laitteiden liitäntään. Examples of Bluetooth-laite-esimerkit eivät ehkä ole kannettavia tietokoneita, pöytätietokoneita, matkapuhelimia ja PDA-laitteita. Jos kannettavassa tietokoneessasi ei ole sisäänrakennettua Bluetooth-tekniikkaa, sinun on liitettävä USB- tai ExpressCardBluetooth-moduuli voidaksesi käyttää Bluetoothia.
Tai kaksoisnapsauta Langaton konsoli -kuvaketta Windowsin ilmoitusalueella ja valitse Bluetooth -kuvake. 3. Siirry kohdasta Ohjauspaneeli kohtaan Verkko ja internet > Verkko ja jakamiskeskus ja napsauta sitten Muuta sovitinasetuksia -painiketta vasemmassa sinisessä ruudussa. 4. Napsauta hiiren oikealla painikkeella Bluetoothverkkoyhteys –painiketta ja valitse Näytä Bluetoothverkkolaitteet. 5. Hae uusia laitteita napsauttamalla Lisää laite.
6. Valitse luettelosta Bluetoothlaite ja napsauta Seuraava -painiketta. 7. Anna laitteen Bluetoothsuojauskoodi ja aloita laiteparin muodostus. 8. Parinmuodostussuhde on nyt rakennettu. Päätä asetus napsauttamalla Sulje painiketta.
USB-laturi+ USB-laturi+:lla voi ladata USB-laitteita, jotka ovat yhteensopivia Akun lataus -version 1.1 (BC 1.1) määritysten kanssa olipa kannettava tietokone päällä tai ei. Voit päättää ja asettaa akkukynnyksen latauksen lopettamiseksi tarpeesi mukaan. Sovittimella USB-laturi+ on aina käytettävissä määritetyssä USB 3.0 -portissa, kun kannettava tietokone on liitetty sovittimella. Ilman sovitinta USB-laturi+:n ottaminen käyttöön 1. Napsauta USB-laturi+kuvaketta ilmoitusalueella ja valitse Asetukset. 2.
L Liitteet
Lisävarusteet Nämä tulevat halutessa lisävarusteina kannettavan täydennykseksi. USB-keskitin (lisävaruste) USB-keskittimen liittäminen lisää USB-porttien määrää ja mahdollistaa useiden USB-laitteiden kytkemisen tai irrottamisen nopeasti yhden kaapelin kautta. USB-muisti USB-muisti on lisävaruste, joka voi tarjota jopa usean sadan megatavun tallennustilan, korkeamman siirtonopeuden ja paremman keston. Nykyisten käyttöjärjestelmien kanssa ohjainten asentaminen ei ole tarpeen.
Käyttöjärjestelmä ja Ohjelmisto Tässä kannettavassa saattaa olla (alueen mukaan) käyttäjän valitsema esiasennettu käyttöjärjestelmä, kuten Microsoft Windows. Valinnat ja kielivalinnat ovat alueen mukaiset. Laitteisto- ja ohjelmistotuen määrä voi olla erilainen asennetun käyttöjärjestelmän mukaan. Muiden käyttöjärjestelmien vakautta ja yhteensopivuutta ei voida taata.
Järjestelmän BIOS-asetukset Tämän luvun BIOS-näyttökuvat ovat vain viitteellisiä. Todelliset näyttökuvat voivat vaihdella malleittain ja alueittain. Käynnistä laite 1. Valitse Boot (Käynnistys) -näytössä Boot Option #1 (Käynnistysvalinta 1). Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. ������������������������������� Main Advanced Chipset Boot Security Save & Exit Enables/Disables UEFI boot from disks.
Turvallisuuden asetus Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. ������������������������ Main Advanced Boot Security Save & Exit If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the user’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup, the User will have Administrator rights.
I/O-käyttöliittymäturvallisuus ������������������������������������� Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Security If Locked, 2nd SATA HDD will be disabled. I/O Interface Security LAN Network Interface Wireless Network Interface HD AUDIO Interface SATA ODD Interface USB Interface Security [UnLock] [UnLock] [UnLock] [UnLock] LAN Network Interface Lock UnLock : Select Screen : Select Item Enter: Select +/—: Change Opt.
USB-käyttöliittymäturvallisuus Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Security ������������������������������������� If Locked, all USB device will be disabled. USB Interface Security USB Interface [UnLock] External Ports BlueTooth CMOS Camera Card Reader [UnLock] [UnLock] [UnLock] [UnLock] USB Interface LocK UnLock : Select Screen : Select Item Enter: Select +/—: Change Opt. F1: General Help F9: Optimized Defaults F10: Save ESC: Exit Version 2.01.1208.
HDD-salasana Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. ������������������������ Main Advanced Boot Security Save & Exit If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the user’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup, the User will have Administrator rights.
Tallenna muutokset Jos haluat säilyttää konfigurointiasetuksesi, sinun täytyy tallentaa muutokset ennen kuin poistut BIOS-asetusapuohjelmasta.. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. ����������������������������������� Main Advanced Chipset Boot Security Save & Exit Save Changes and Exit Discard Changes and Exit Exit system setup after saving the changes.
Yleisiä ongelmia ja ratkaisuja Laitteisto-ongelma – Optinen levy Optinen levyasema ei kykene lukemaan tai kirjoittamaan levyjä. 1. Päivitä BIOS uusimpaan versioon ja yritä uudelleen. 2. Jos BIOS:in päivittäminen ei auta, yritä parempilaatuisia levyjä ja yritä uudelleen. 3. Jos ongelma yhä pysyy, ota yhteys paikalliseen huoltokeskukseen ja pyydä apua insinööriltä. Tuntematon syy – Järjestelmä epävakaa Lepotilasta ei voi herättää. 1.
Laitteisto-ongelma - Sisäänrakennettu kamera Sisäänrakennettu kamera ei toimi oikein. 1. Tarkasta “Laitehallinta” nähdäksesi onko mitään ongelmia. 2. Yritä asentaa web-kameran laiteohjain uudelleen ongelman ratkaisemiseksi. 3. Jos ongelmaa ei ole ratkaistu, päivitä BIOS uusimpaan versioon ja yritä uudelleen. 4. Jos ongelma yhä pysyy, ota yhteys paikalliseen huoltokeskukseen ja pyydä apua insinööriltä. Laitteisto-ongelma - Akku Akun huolto. 1.
Oire ja ratkaisut: A. Ongelma saattaa olla emolevyssä, kovalevyssä tai itse kannettavassa – käy paikallisessa huoltoliikkeessä hakemassa apua. B. Käyttöjärjestelmän aiheuttama ongelma, yritä järjestelmäsi palauttamista palautusosiota tai levyä käyttäen. TÄRKEÄÄ: Sinun täytyy varmistaa kaikki datasi toiseen paikkaan ennen palauttamista. C. Sovitinongelma; tarkasta virtajohdon liitännät, muussa tapauksessa käy paikallisessa huoltokeskuksessa vaihtamista varten. D.
HUOMIO: Älä liitä internetiin ennen kuin olet asentanut virustorjuntaohjelmiston ja internet-palomuurin suojautumaan viruksilta. Ohjelmiso-ongelma – ASUS-niputettu ohjelmistoc Käynnistäessäni kannettavan PC:n, näkyy viesti “Avoimen politiikan tiedostovirhe”. A. Asenna uudelleen uusin versio “Power4 Gear” –apuohjelmasta ongelmasi ratkaisemiseksi. Se on saatavissa ASUS-web-sivulta.
5. Jos ongelmaa ei vielä voida ratkaista, käytä palautusprosessia asentamaan koko järjestelmäsi uudelleen. TÄRKEÄÄ: Sinun täytyy varmistaa kaikki datasi toiseen paikkaan ennen palauttamista. HUOMIO: Älä liitä internetiin ennen kuin olet asentanut virustorjuntaohjelmiston ja internet-palomuurin suojautumaan viruksilta. HUOMAUTUS: Varmista, että ensin asennat “Intel INF Update” -päivityksen ja “ATKACPI”-laiteohjaimet niin, että laitteiston laitteet voidaan tunnistaa. 6.
Ohjelmisto-ongelma - BIOS BIOS:in päivittäminen. 1. Varmista kannettavan PC:n tarkka malli ja lataa malliisi sopiva uusin BIOS-tiedosto ASUS-sivustolta ja tallenna se flashlevyasemalle. 2. Liitä flash-levyasemasi kannettavaan PC-tietokoneeseesi ja kytke virta päälle. 3. Käytä ”Start Easy Flash” -toimintoa BIOS-asennusohjelman Lisäasetukset-sivulla. Seuraa annettuja ohjeita. Main �������� Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Kannettavan tietokoneen palauttaminen Palautusosion käyttäminen Recovery Partition (Palautusosio) palauttaa nopeasti kannettavan tietokoneen ohjelmiston sen alkuperäiseen toiminnallisuuteen.Ennen palautusosion käyttämistä, kopioi data-tiedostosi (kuten Outlook PST -tiedostot) USB-laitteeseen tai verkkoasemalle ja merkitse muistiin kaikki mukautetut konfigurointiasetukset (kuten verkkoasetukset).
Palauta Windows koko-HD:lle 2 osion kanssa. Tämä valinta poistaa kaikki osiot kovalevyasemaltasi ja luo kaksi uutta osiota “C” (40%) ja “D” (60%). 6. Seuraa näytölle tulevia ohjeita palautusprosessin suorittamiseksi loppuun saakka. Vieraile osoitteessa www.asus.com päivitettyjä laiteohjaimia ja apuohjelmia varten. Palautus-DVD:n käyttäminen: (tietyissä malleissa) Lukitse toissijainen kiintolevyasema: Palautus-DVD:n luominen: 1. Kaksoisnapsauta Windowsin työpöydältä AI Recovery Burner -kuvaketta. 2.
Palautus-DVD:n käyttäminen 1. Laita Palautus-DVD sisään optiseen asemaan (Kannettava PC tarvitsee käynnistää). 2. Käynnistä kannettava PC ja paina käynnistyksessä ja valitse optinen asema (saattaa olla otsikoitu “CD/DVD”) käyttäen alas-kohdistinta ja paina käynnistääksesi Palautus-DVD: ltä. 3. Aloita kuvan palautus valitsemalla OK. 4. Varmista järjestelmän palautus valitsemalla OK. Palauttaminen kirjoittaa kovalevyn päälle.
DVD-ROM-aseman tietoja Kannettava tulee valinnaisen DVD-ROM-aseman tai CD-ROM-aseman kanssa. DVD-nimikkeiden katselemiseen tarvitsee asentaa DVDkatseluohjelma. Tämän kannettavan lisävarusteena voi ostaa DVDkatseluohjelman. DVD-ROM-asema mahdollistaa sekä CD- että DVDlevyjen käytön. Tietoja alueellisesta toistosta DVD-elokuvien katselu vaatii MPEG2-videon ja digitaalisen AC3audion purkua sekä CSS-suojatun sisällön avaamista.
Aluemääritykset Alue 1 Kanada, Yhdysvallat, US Territories Alue 2 Tsekki, Egypti, Suomi, Ranska, Saksa, Gulf States, Unkari, Islanti, Iran, Irak, Irlanti, Italia, Japani, Alankomaat, Norja, Puola, Portugali, SaudiArabia, Skotlanti, Etelä-Afrikka, Espanja, Ruotsi, Sveitsi, Syyria, Turkki, Iso-Britannia, Kreikka, Entiset Jugoslavian tasavallat, Slovakia Alue 3 Burma, Indonesia, Etelä-Korea, Malesia, Filippiinit, Singapore, Taiwan, Thaimaa, Vietnam Alue 4 Australia, Karibia (paitsi US Territories), Keski-Ameri
Blu-ray ROM -asematiedot (tietyissä malleissa) Aluemääritykset Alue A Pohjois-, Keski- ja Etelä-Amerikan maat ja niiden territoriot, Taiwan, Hongkong, Macao, Japani, Korea (Etelä- ja Pohjois-), Etelä-Aasian maat ja niiden territoriot. Alue B Euroopan, Afrikan ja Etu-Aasian maat ja niiden territoriot, Australia ja Uusi-Seelanti. Alue C Keski- ja Etelä-Aasian, Itä-Euroopan maat ja niiden territoriot, Kiina ja Mongolia. Katso lisätietoja Blu-ray Discin kotisivulta osoitteesta www.bluraydisc.
Sisäinen modeemiyhteensopivuus Kannettava tietokone, jossa on sisäinen modeemimalli, on JATE (Japani) -, FCC (Yhdysvallat, Kanada, Korea, Taiwan) - ja CTR21yhteensopiva. Sisäinen modeemi on hyväksytty neuvoston päätöksen 98/482/EC mukaisesti yleiseurooppalaiseksi yhden päätteen liitännäksi yleiseen puhelinverkkoon (public switched telephone network) (PSTN).
Verkkoyhteensopivuusilmoitus Vakuutus, joka laitevalmistajan on annettava käyttäjälle: ”Tässä vakuutuksessa mainitaan verkot, joissa laite on suunniteltu toimimaan, ja mahdolliset ilmoitetut verkot, joissa laitteella voi olla yhteentoimivuusongelmia. Laitteen valmistajan on myös liitettävä laitteeseen tiedote, jossa kerrotaan selkeästi tapauksista, joissa yhteensopivuus verkon kanssa riippuu laitteiston ja ohjelmiston asetuksista.
Taulukossa on lueteltu maat, joissa CTR21-standardi on käytössä.
Nämä tiedot on kopioitu CETECOMilta ja ne on toimitettu ilman sitoumusta. Jos haluat päivittää taulukon tietoja, vieraile osoitteessa http://www.cetecom.de/technologies/ctr_21.html 1 Kansallisia vaatimuksia sovelletaan vain, jos laitteisto voi käyttää pulssivalintaa (laitevalmistaja voi ilmoittaa käyttöoppaassa, että laite on tarkoitettu vain tukemaan DTMF-signaalia, mikä tekee lisätesteistä tarpeettomia). Alankomaissa lisätestausta vaaditaan sarjaliitäntöjen ja soittajan tunnustoimintojen vuoksi.
Lausunnot ja turvallisuuslausunnot FCC-lausunto Tämä laite täyttää FCC sääntöjen kohdan 15. Käyttö täyttää seuraavat kaksi ehtoa: • • Tämä laite ei saa aiheuttaa haitallista häiriötä. Tämän laitteen tulee hyväksyä kaikki vastaanotettu häiriö, mukaan lukien häiriö, joka voi aiheuttaa ei-toivottuja toimintoja. Tämä laite on testattu ja sen on havaittu toimivan digitaalilaitteiden luokan B rajoissa, jotka on määritelty FCC:n sääntöjen kohdassa 15.
(Uusi painos kohteesta Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and Records Administration, U.S. Government Printing Office.) FCC:n radiotaajuusaltistuvaroitus FCC:n varoitus: Kaikki muutokset, joita yhteensopivuudesta vastaava osapuoli ei erikseen ole hyväksynyt, voivat kumota käyttäjän oikeuden käyttää tätä laitetta.
CE-merkkivaroitus CE-merkintä laitteille, joissa ei ole langatonta LAN/Bluetoothtoimintoa Tämän laitteen toimitettu versio täyttää EY-direktiivit 2004/108/ EY (sähkömagneettinen yhteensopivuus) ja 2006/95/EY (pienjännitedirektiivi). CE-merkintä laitteille, joissa on langaton LAN/Bluetooth Tämä laite täyttää Euroopan parlamentin ja komission direktiivin 1999/5/EY (9.3.1999) radio- ja telepäätelaitteista ja keskinäisestä yhdenmukaisuudesta.
Langaton käyttökanava eri alueilla Pohjois-Amerikka 2.412-2.462 GHz Ch01 – CH11 Japani 2.412-2.484 GHz Ch01 – Ch14 Eurooppa ETSI 2.412-2.472 GHz Ch01 – Ch13 Ranskan rajoitetut langattoman taajuuskaistat Joillakin Ranskan alueilla on rajoitettu taajuuskaista. Pahimmat maksimit valtuutettuna tehona sisällä ovat: • • 10 mW koko 2,4 GHz -kaistalle (2400 MHz–2483,5 MHz) 100 mW taajuuksille väliltä 2446,5 MHz ja 2483,5 MHz Kanavat 10 – 13 käyttävät yksin kaistaa 2446,6 MHz – 2483,5 MHz.
60 Oise 61 Orne 63 Puy du Dôme 64 Pyrénées Atlantique 66 Pyrénées Orientales 67 Bas Rhin 68 Haut Rhin 70 Haute Saône 71 Saône et Loire 75 Paris 82 Tarn et Garonne 84 Vaucluse 88 Vosges 89 Yonne 90 Territoire de Belfort 94 Val de Marne Tämä vaatimus muuttuu todennäköisesti ajan myötä ja antaa käyttää langatonta verkkokorttia useammilla Ranskan alueilla.Tarkista viimeisimmät tiedot ART:lta (http://www.arcep.fr).
UL-turvallisuushuomautukset Vaaditaan UL 1459:n sisältämälle telekommunikaatiolaitteelle (puhelimelle), joka on tarkoitettu sähköisesti yhdistettäväksi telekommunikaatioverkkoon, jossa on käyttöjännite maahan, joka ei ylitä 200 V huippujännitettä, 300 V huipusta huippuun -jännitettä ja 105 V tehollisarvoa, ja joka on asennettu tai käytetty National Electrical Coden (NFPA 70) mukaisesti.
Virtaturvallisuusvaatimus Tuotteiden, joiden sähkövirtaluokitus on jopa 6 A ja jotka painavat yli 3 kiloa, tulee käyttää hyväksyttyjä virtajohtoja, jotka ovat vähintään: H05VV-F, 3G, 0.75mm2 tai H05VV-F, 2G, 0.75mm2. Huomautuksia TV-virittimestä Huomautus CATV-järjestelmän asentajalle Kaapelijakelujärjestelmän tulee olla maadoitettu (maatettu) ANSI/NFPA 70 –normin mukaisesti, National Electrical Code (NEC), erityisesti osan 820.
Eri maiden varoitukset Pohjoismaiden varoitukset (litium-ioniakut) CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. (English) ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente.
Optisen aseman turvallisuustiedot Laserturvallisuustiedot Sisäiset tai ulkoiset optiset asemat, jotka myydään tämän kannettavan kanssa, sisältävät LUOKAN 1 LASERTUOTTEEN. Laserluokitukset löytyvät tämän ohjekirjan lopun sanastosta. VAROITUS: Muiden kuin ohjekirjassa määritettyjen säätöjen tai toimenpiteiden tekeminen voi johtaa vaaralliseen laseraltistukseen. Älä yritä purkaa optista asemaa. Turvallisuutesi vuoksi anna vain valtuutetun huoltajan huoltaa optinen asema.
Macrovision Corporationin tuotehuomautus Tämä tuote käyttää kopio-oikeuksien suojaamaa tekniikkaa, jota suojaa tiettyjen Yhdysvaltain patenttien menetelmä sekä muut immateriaalioikeudet, jotka omistaa Macrovision Corporation ja muut oikeuksien omistajat. Tämän kopio-oikeudeltaan suojatun tekniikan käytön tulee olla Macrovision Corporationin valtuuttamaa ja se on tarkoitettu vain kotikäyttöön ja muuhun rajoitettuun katseluun ellei Macrovision Corporation ole muuhun valtuuttanut.
CTR 21 -hyväksyntä������������������������������� (kannettaville ������������������������������ tietokoneille, joissa on sisäänrakennettu modeemi) Danish Dutch English Finnish French German Greek Italian Portuguese L-36 Kannettavan tietokoneen käyttöopas
Spanish Swedish Kannettavan tietokoneen käyttöopas L-37
Euroopan unionin ekomerkintä Tälle kannettavalle tietokoneelle on myönnetty EU:n kukkamerkintä, mikä tarkoittaa, että tuote täyttää seuraavat ehdot: 1. Pienempi energiankulutus käytön ja valmiustilan aikana. 2. Myrkyllisten raskasmetallien rajoitettu käyttö. 3. Ympäristölle ja terveydelle haitallisten ainesosien rajoitettu käyttö. 4. Luonnonvarojen vähäisempi käyttö kierrätystä edistämällä. 5.
Globaalien ympäristösäädösten vaatimustenmukaisuus ja vakuutus ASUS toimii vihreä design -käsitteen mukaisesti tuotteidensa suunnittelussa sekä valmistuksessa ja varmistaa, että ASUStuotteiden kaikki elämänkaaren vaiheet ovat globaalien ympäristösäädösten mukaisia. Lisäksi ASUS julkistaa asiaankuuluvat säädösvaatimuksiin perustuvat tiedot. Katso osoitteesta http://csr.asus.com/english/Compliance.
Tekijänoikeustiedot Tämän käyttöoppaan osia tai siinä kuvattuja tuotteita ja ohjelmistoja ei saa monistaa, siirtää, jäljentää, tallentaa hakujärjestelmään tai kääntää millekään kielelle missään muodossa tai millään tavalla, lukuun ottamatta dokumentaatiota, jonka ostaja on säilyttänyt varmistustarkoituksessa, ilman ASUSTeK COMPUTER INC:n (“ASUS”) erikseen myöntämää, kirjallista lupaa.
Vastuurajoitus Joissain tapauksissa voit olla oikeutettu saamaan korvauksia ASUSilta ASUSin tai muun vastuullisen osapuolen virheen vuoksi.
EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address, City: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C. Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.