User’s Manual

D-8
Uporabniški priročnik za prenosni računalnik
Geslo HDD
Nastavitev gesla HDD:
1. Na zaslonu Security (Varnost) kliknite Set Master Password
(Nastavi glavno geslo), vtipkajte geslo in pritisnite [Enter].
2. Znova vtipkajte geslo za potrditev in pritisnite [Enter].
3. Kliknite Set User Password (Nastavi upor. geslo) in ponovite
prejšnje korake za nastavitev uporabniškega gesla.
4. Geslo je nastavljeno.
• Geslo HDD lahko spremenite le, če se prijavite s privilegiji
skrbnika.
• Master Password (Glavno geslo) morate nastaviti, še
preden nastavite User Password (Uporabniško geslo).
Najprej boste morali vnesti uporabniško geslo (če obstaja) in
nato uporabniško geslo HDD v primeru, če zaženete prenosnik
in ne morete vstopiti v operacijski sistem, če ne vnesete
pravilnega gesla.
: Select Screen
: Select Item
Enter: Select
+/—: Change Opt.
F1: General Help
F9: Optimized Defaults
F10: Save ESC: Exit
Version 2.01.1204. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Boot Security Save & Exit
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the user’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup, the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Secure Boot control [Enabled]
HDD Password Status : NOT INSTALLED
Set Master Password
Set User Password
I/O Interface Security
Security Boot Policy
Set the system boot order.
***Advanced to Power Cycle
System after Setting Hard Disk
Passwords***
Create New Password