PL6951 Podręcznik użytkownika komputera ASUS Luty 2012
Spis treści Spis treści............................................................................................................... 2 Rozdział 1: Wprowadzenie do komputera O podręczniku użytkownika........................................................................... 6 Uwagi dotyczące tego podręcznika............................................................. 6 Zasady bezpieczeństwa.................................................................................... 7 Przygotowanie notebooka...
Rozszerzona klawiatura (w wybranych modelach).............................42 Przyciski sterowania multimediami..........................................................43 Przełączniki i wskaźniki stanu.......................................................................44 Przełączniki........................................................................................................44 Wskaźniki stanu.................................................................................................
Informacje o napędzie Blu-ray ROM (w wybranych modelach).. D-21 Zgodność wewnętrznego modemu..................................................... D-22 Deklaracje i oświadczenia dotyczące bezpieczeństwa.................. D-26 Oświadczenie o zgodności z przepisami Federal Communications Commission (FCC)......................................................................................D-26 Oświadczenie FCC dotyczące ostrzeżenia o ekspozycji częstotliwości radiowej (RF).......................................
1 Rozdział 1: Wprowadzenie do komputera
O podręczniku użytkownika To jest podręcznik użytkownika. Zawiera on informacje o podzespołach komputera oraz sposobie ich używania. Podręcznik został podzielony na następujące części: 1. Wstęp Ogólne informacje dotyczące komputera i tego podręcznika użytkownika. 2. Budowa komputera Informacje dotyczące komponentów komputera. 3. Wprowadzenie Podstawy korzystania z komputera przenośnego. 4. Korzystanie z komputera Wprowadzenie do pracy z komputerem przenośnym. 5.
Zasady bezpieczeństwa Przestrzeganie podanych poniżej zasad bezpieczeństwa pozwoli na długą i satysfakcjonującą pracę na komputerze. Należy się stosować do wszystkich wymienionych poniżej wskazówek. Poza czynnościami wskazanymi w tym podręczniku, wszelkie prace serwisowe należy powierzyć wykwalifikowanemu personelowi. Przed rozpoczęciem czyszczenia należy odłączyć zasilanie prądem zmiennym i wyjąć zestawy baterii.
BEZPIECZNA TEMPERATURA: ten komputer może być używany wyłącznie w miejscach, gdzie temperatura otoczenia mieści się w zakresie od 5° C (41°F) do 35°C (95°F). WARTOŚĆ ZNAMIONOWA WEJŚCIA: Sprawdź etykietę wartości znamionowych w dolnej części komputera i upewnij się, że adapter zasilania może zapewnić wymagane zasilanie. NIE NALEŻY przenosić lub przykrywać komputera z włączonym zasilaniem żadnymi materiałami, które redukują przepływ powietrza, takimi jak torba do przenoszenia.
Ostrzeżenie dotyczące ciśnienia dźwięku Nadmierne ciśnienie dźwięku ze słuchawek dousznych lub nagłownych, może spowodować uszkodzenie lub utratę słuchu. Regulacja głośności oraz korektora na ustawienia inne niż pozycja centralna, mogą zwiększyć napięcie wyjścia słuchawek dousznych lub nagłownych i poziomu ciśnienia dźwięku. Ostrzeżenie dotyczące wentylatora na prąd stały Należy pamiętać, że wentylator na prąd stały jest elementem ruchomym i może być niebezpieczny.
Przykrywanie komputera Należy zakupić torbę do przenoszenia komputera w celu ochrony go przed brudem, wodą, wstrząsami i zarysowaniami. Ładowanie baterii W celu korzystania z komputera podczas dłuższych wyjazdów, należy się upewnić że bateria jest naładowana, a także zabrać ze sobą zapasową baterię. Należy pamiętać, że adapter zasilania ładuje zestaw baterii przez cały czas podłączenia go do komputera i do źródła zasilania prądem zmiennym.
Przygotowanie notebooka W tym miejscu znajdują się jedynie krótkie instrukcje dotyczące używania komputera.
Otwieranie panela wyświetlacza LCD 1. Ostrożnie unieś kciukiem panel wyświetlacza. 2. Wolno przechyl panel wyświetlacza do przodu lub do tyłu, aby uzyskać wygodny kąt widzenia. Włączanie zasilania 1. Naciśnij i zwolnij przycisk zasilania poniżej panela wyświetlacza LCD. 2. Użyj [Fn]+[F5] lub [Fn]+[F6] do regulacji jasności LCD.
Rozdział 2: 2 Poznanie budowy
Widok z góry Układ klawiatury może się różnić w zależności od regionu geograficznego.
1 Mikrofon (wbudowany) Wbudowanego mikrofonu można używać do wideokonferencji, narracji głosowych lub zwykłego nagrywania audio. 2 Kamera Wbudowana kamera umożliwia wykonywanie zdjęć lub nagrywanie wideo. Można ją używać do wideokonferencji i innych aplikacji interaktywnych. 3 Wskaźnik pracy kamery Podczas używania wbudowanej kamery wyświetlany jest wskaźnik pracy kamery. 4 Panel wyświetlacza Funkcje panela wyświetlacza są takie same jak monitora typu desktop.
7 ���������� Klawiatura Komputer wyposażony jest w pełnowymiarową klawiaturę. Dwa klawisze funkcyjne Windows ułatwiają nawigację w systemie operacyjnym Windows. 8 Touchpad 9 Wskaźniki stanu (przód) 16 Touchpad z przyciskami to urządzenie wskazujące, które udostępnia te same funkcje, co mysz w komputerze typu desktop. Funkcja przewijania jest dostępna po zainstalowaniu dostarczonego sterownika touchpada i ułatwia nawigację w systemie Windows lub w sieci web.
Widok z dołu Widok dolnej części może się różnić w zależności od modelu. Rozmiar zestawu baterii różni się, w zależności od modelu. OSTRZEŻENIE! Dolna część komputera może silnie się rozgrzewać. Należy uważać podczas korzystania z komputera, w trakcie jego działania lub gdy był niedawno używany. Wysoka temperatura to zjawisko normalne podczas ładowania i używania. Nie należy używać komputera na miękkich powierzchniach, takich jak kanapy czy łóżka, które mogą blokować szczeliny wentylacyjne.
1 2 Blokada baterii - sprężynowa Sprężynowa blokada modułu baterii służy do zabezpieczania baterii. Po włożeniu zestawu baterii następuje automatyczne zamknięcie. Aby wyjąć baterię, należy przytrzymać zaczep sprężynowy w pozycji odblokowania. 3 Wnęka na dysk twardy Dysk twardy jest zabezpieczony we wnęce. Informacje o możliwościach rozbudowy dysku twardego dla komputera można uzyskać w centrum serwisowym lub u sprzedawcy.
Widok z prawej 1 2 4 5 6 7 8 Gniazdo wyjścia słuchawek Gniazdo wyjścia słuchawek stereo (1/8 cala) jest stosowane do połączenia sygnału wyjścia audio komputera do głośników ze wzmacniaczem lub słuchawek. Użycie tego gniazda powoduje automatyczne wyłączenie wbudowanych głośników. Combo 1 3 2 3 Gniazdo wyjścia SPDIF To gniazdo zapewnia połączenie z urządzeniami zgodnymi z SPDIF (Sony/Philips Digital Interface (Interfejs cyfrowy Sony/ Philips)) dla cyfrowego wyjścia audio.
4 Napęd optyczny Występuje wiele wersji tego modelu komputera, które mogą być wyposażone w różne napędy optyczne. Napęd optyczny komputera może obsługiwać dyski kompaktowe (CD) i/lub cyfrowe dyski wideo (DVD) i posiadać możliwość zapisu (R) lub ponownego zapisu (RW). Szczegółowe informacje dotyczące każdego modelu znajdują się w specyfikacjach marketingowych. 5 6 Elektroniczne wysuwanie napędu optycznego Do wysuwania tacy napędu optycznego służy elektroniczny przycisk wysuwania.
8 Port blokady Kensington® Port blokady Kensington® umożliwia zabezpieczenie komputera, poprzez użycie produktów zabezpieczania notebooka zgodnych z Kensington®. Jest to zazwyczaj metalowa linka i zamek, które zabezpieczają komputer przed odłączeniem od stałego obiektu. Niektóre produkty zabezpieczenia mogą także zawierać detektor ruchu, generujący po poruszeniu dźwięk alarmu.
3 Szczeliny wentylacyjne Szczeliny wentylacyjne umożliwiają wpływanie powietrza chłodzącego i wypływanie ciepłego powietrza z notebooka. WAŻNE! Upewnić się, że papiery, książki, ubrania, kable lub inne przedmioty nie blokują żadnej ze szczelin wentylacyjnych. W przeciwnym razie może dojść do przegrzania. 4 Port sieci LAN 5 Ośmiopinowy port LAN RJ-45 jest większy od portu modemu RJ-11 i obsługuje standardowe połączenie kablem Ethernet z siecią lokalną.
Widok z tyłu 1 1 Moduł baterii Po podłączeniu do źródła zasilania prądu zmiennego rozpoczyna się automatyczne ładowanie zestawu baterii. Moduł baterii umożliwia korzystanie z notebooka bez konieczności podłączania do zasilania. Czas pracy komputera na baterii może się różnić w zależności od sposobu używania i specyfikacji danego notebooka. Baterii nie wolno rozbierać - należy ją zakupić w formie pojedynczego modułu.
Podłączanie subwoofera Subwoofer dostarczony z notebookiem ma niewielkie wymiary i jest łatwy do przenoszenia. Wystarczy podłączyć subwoofer do gniazda subwoofera notebooka, aby korzystać z doskonałych basów w aplikacjach multimedialnych. NIE należy podłączać subwoofera do innych gniazd audio niż gniazdo subwoofera, pokazane na ilustracji w podręczniku użytkownika. Może to spowodować uszkodzenie subwoofera lub gniazda audio.
3 Rozdział 3: Rozpoczęcie używania
System zasilania Zasilacz Komputer może być zasilany z dwóch źródeł, z sieci energetycznej poprzez zasilacz sieciowy, lub z zestawu bateryjnego. Zasilacz przekształca prąd zmienny ze ściennego gniazda zasilania na prąd stały wymagany przez komputer. Komputer jest dostarczany z uniwersalnym zasilaczem przekształcającym prąd zmienny na prąd stały. Oznacza to, że można podłączyć przewód zasilający do dowolnego źródła 100V-120V lub 220V-240V bez przestawiania przełączników lub używania konwerterów zasilania.
WAŻNE! Użycie zasilacza komputera do zasilania innych urządzeń elektrycznych, może spowodować uszkodzenie. Jeśli pojawi się dym, będzie wyczuwalny zapach spalenizny lub wystąpi zbyt wysoka temperatura zasilacza należy zgłosić się do serwisu. Z serwisem należy się skontaktować także wtedy, gdy istnieje podejrzenie uszkodzenia adaptera prąd zmienny - prąd stały. Uszkodzony zasilacz, może spowodować zniszczenie zestawu baterii i komputera.
Bateria Komputer jest przeznaczony do pracy z wymiennym zestawem baterii. Zestaw baterii składa się z połączonych we wspólnej obudowie ogniw baterii. W pełni naładowany zestaw, zapewnia zasilanie przez kilka godzin, a czas ten można wydłużyć poprzez stosowanie zarządzania zasilaniem. Dodatkowe zestawy baterii są opcjonalne i można je zakupić oddzielnie u sprzedawcy komputera.
Deinstalacja modułu baterii: 1 2 WAŻNE! Należy używać wyłącznie modułów baterii i zasilaczy dostarczonych z tym komputerem lub specjalnie zatwierdzonych przez producenta lub sprzedawcę do używania z tym modelem, 2 w przeciwnym przypadku może wystąpić uszkodzenie 1 komputera. Właściwa eksploatacja baterii Moduł baterii komputera, jak wszystkie ładowalne baterie, może być ładowany określoną ilość razy.
Włączanie zasilania komputera Po włączeniu komputera na ekranie wyświetlany jest komunikat włączenia zasilania. W razie potrzeby, jasność można wyregulować przyciskami skrótów. Aby uruchomić program konfiguracji BIOS w celu ustawienia lub modyfikacji konfiguracji systemu, naciśnij [F2] podczas uruchamiania. Po naciśnięciu [Tab] podczas wyświetlania ekranu początkowego, wyświetlone zostaną informacje startowe, takie jak wersja BIOS.
Technologia automatycznego wykrywania i naprawy błędów S.M.A.R.T. (Self Monitoring and Reporting Technology) sprawdza dysk twardy podczas testu POST i generuje komunikat z ostrzeżeniem, jeśli dysk twardy wymaga serwisowania. Jeśli w trakcie uruchamiania zostanie wygenerowane ostrzeżenie o błędzie krytycznym dysku twardego, należy jak najszybciej wykonać kopię zapasową danych i uruchomić program sprawdzający dysk w systemie Windows.
Sprawdzenie baterii Moduł baterii obsługuje standard Smart Battery, dzięki czemu w systemie Windows możliwe jest monitorowanie stanu naładowania baterii. W zależności od konfiguracji sprzętowej i sposobu użytkowania, całkowicie naładowany zestaw baterii zapewnia zasilanie do kilku godzin poprzez stosowanie zarządzania zasilaniem.
Ładowanie baterii Przed użyciem komputera w czasie podróży należy naładować zestaw baterii. Ładowanie zestawu baterii rozpoczyna się po podłączeniu do zewnętrznego zasilania poprzez adapter zasilania. Zestaw baterii należy całkowicie naładować przed pierwszym użyciem. Nowy zestaw baterii należy całkowicie naładować przed odłączeniem komputera od zewnętrznego zasilania. Pełne naładowanie baterii przy włączonym komputerze trwa kilka godzin, a przy włączonym komputerze może potrwać dwukrotnie dłużej.
Ponowne uruchamianie komputera W niektórych sytuacjach po wprowadzeniu zmian do systemu operacyjnego konieczne jest jego ponowne uruchomienie. Niektóre procesy instalacyjne wyświetlają okno dialogowe umożliwiające wykonanie restartu. Aby zrestartować system ręcznie, kliknij przycisk Start systemu Windows i strzałkę w prawo, a następnie wybierz Restart(Uruchom ponownie). W celu uzyskania innych opcji, takich jak “Przełącz użytkownika, Uruchom ponownie, Wstrzymaj lub Zamknij”, kliknij strzałkę w prawo.
Wyłączanie awaryjne Jeśli nie można prawidłowo wyłączyć lub uruchomić ponownie systemu operacyjnego, dostępne są dwa dodatkowe sposoby wyłączania komputera: • Przytrzymaj przycisk zasilania przez 4 sekundy. WAŻNE! Nie należy stosować wyłączania awaryjnego w trakcie zapisywania danych; może to spowodować ich utratę.
Tryby zarządzania zasilaniem Komputer posiada wiele automatycznych lub regulowanych funkcji oszczędzania energii, które można wykorzystać do maksymalizacji żywotności baterii i obniżenia TCO (Total Cost of Ownership [Całkowity koszt utrzymania]. Niektóre z tych funkcji można regulować przez menu Power (Zasilanie) programu BIOS Setup. Ustawienia zarządzania zasilaniem ACPI wykonuje się poprzez system operacyjny.
Uśpienie oznacza to samo co STR (Suspend-to-RAM). Funkcja ta zapisuje bieżące dane w pamięci RAM gdy wyłączanych jest wiele komponentów. Ponieważ pamięć RAM jest ulotna, do podtrzymania danych (odświeżania) wymagane jest zasilanie. Kliknij przycisk Windows i strzałkę w prawo, aby wyświetlić tę opcję. Do uaktywnienia tego trybu można także użyć skrótu klawiaturowego [Fn F1]. Przywrócenie działania następuje po naciśnięciu dowolnego przycisku, poza przyciskiem [Fn].
Kontrola temperatury Dostępne są trzy metody kontrolowania stanu termicznego komputera. Metody kontroli nie mogą być konfigurowane przez użytkownika i powinny być znane na wypadek, gdy komputer przejdzie do tych stanów. Następujące temperatury reprezentują temperaturę obudowy (nie procesora). • Gdy temperatura osiągnie bezpieczny górny limit włącza się wentylator w celu aktywnego chłodzenia.
Specjalne funkcje klawiatury Przyciski skrótów (w wybranych modelach) Poniżej znajduje się lista skrótów klawiszowych. W celu wywołania skrótu klawiszowego należy nacisnąć i przytrzymać przycisk funkcyjny [Fn] oraz klawisz skrótu. Umieszczenie konkretnych skrótów na klawiszach funkcyjnych może być różne w różnych modelach. Proszę zwracać uwagę bardziej na ikonki reprezentujące skróty, niż na numery klawiszy funkcyjnych.
Ikony LCD/Monitor (F8): Przełączanie pomiędzy wyświetlaniem na panelu LCD i zewnętrznym monitorze w kolejności: wyświetlacz LCD komputera->zewnętrzny monitor->obydwa. (Ta funkcja nie działa w trybie 256 kolorów, wybierz tryb High Color w ustawieniach wyświetlania). Ważne: Przed przełączeniem wyświetlania na zewnętrzny monitor należy go podłączyć. Przekreślony touchpad (F9): Przełączenie wbudowanego touchpada do pozycji zablokowany (wyłączony) i odblokowany (włączony).
Fn+C: Włączanie i wyłączanie funkcji “Splendid Video Intelligent Technology”. Funkcja ta umożliwia przełączanie pomiędzy różnymi trybami rozszerzania kolorów w celu poprawy kontrastu, jasności, odcienia skóry i niezależnego nasycenia kolorów czerwonego, zielonego i niebieskiego. Bieżący tryb jest wyświetlany w menu ekranowym (OSD). Fn+V (w wybranych modelach): Uruchamia aplikację “Life Frame”. W niektórych modelach ta funkcja jest dostępna wyłącznie po włączeniu aparatu.
Przyciski Microsoft Windows Na klawiaturze znajdują się dwa specjalne przyciski Windows, opisane poniżej. Przycisk z logo Windows uaktywnia menu Start w dolnej, lewej części pulpitu Windows. Drugi przycisk, który wygląda jak menu Windows z małym kursorem, uaktywnia menu właściwości i stanowi odpowiednik naciśnięcia prawym przyciskiem myszy obiektu Windows. Rozszerzona klawiatura (w wybranych modelach) Rozszerzona klawiatura jest dostępna w wybranych modelach.
Przyciski sterowania multimediami Przyciski sterowania multimediami umożliwiają wygodne sterowanie aplikacjami multimedialnymi. Poniżej podano przeznaczenie każdego z przycisków multimedialnych w komputerze. Niektóre funkcje przycisków zależą od modelu komputera. Użyj przycisku [Fn] w połączeniu z przyciskami strzałek do funkcji sterowania CD. Start/Pauza odtwarzania CD Podczas zatrzymania CD, rozpoczyna odtwarzanie CD. Podczas odtwarzania CD, wstrzymuje odtwarzanie CD.
Przełączniki i wskaźniki stanu Przełączniki Przełącznik zasilania 44 Przełącznik zasilania umożliwia włączanie i wyłączanie komputera i przywracanie z hibernacji (STD). Naciśnij raz ten przełącznik w celu włączenia i raz w celu wyłączenia komputera. Przełącznik zasilania działa wyłącznie przy otwartym panelu wyświetlacza.
Wskaźniki stanu Wskaźnik zasilania Wskaźnik zasilania świeci się po włączeniu komputera i wolno miga, gdy komputer znajduje się w trybie Suspend-to-RAM (Wstrzymanie). Wskaźnik ten jest wyłączony, gdy wyłączony został komputer lub znajduje się w trybie Suspend-to-Disk (Hibernacja).
Wskaźnik aktywności napędu Oznacza, że komputer znajduje się w trakcie dostępu do jednego lub więcej urządzeń pamięci masowej, takich jak dysk twardy. Częstotliwość migania światła jest proporcjonalna do czasu dostępu. Bluetooth / Wskaźnik sieci bezprzewodowej Dotyczy to wyłącznie modeli z wewnętrzną funkcją Bluetooth (BT) i wbudowaną bezprzewodową siecią LAN. Światło tego wskaźnika wskazuje uaktywnienie wbudowanej funkcji Bluetooth (BT) komputera.
Używanie przycisku natychmiastowego uruchomienia Naciśnięcie przycisku natychmiastowego uruchomienia, umożliwia szybkie uaktywnienie wstępnie ustawionej funkcji przycisku natychmiastowego uruchomienia. Jednocześnie można uaktywnić jedną funkcję przycisku natychmiastowego uruchomienia.
2. Na ekranie powitalnym, kliknij Ustawienia w celu uruchomienia ekranu ustawień. 3. Na ekranie ustawień, kliknij jedną z ikon, skonfiguruj ustawienie, a następnie kliknij Zastosuj. Kliknij strzałki, aby wyszukać funkcje przycisku natychmiastowego uruchomienia, które można skonfigurować.
Skonfigurować można następujące funkcje przycisku natychmiastowego uruchomienia: Funkcja Opis Tłumienie głośności Zwiększanie/zmniejszanie głośności lub ustawianie trybu wyciszenia. Natychmiastowe uruchomienie aplikacji Szybkie uruchamianie często używanych aplikacji lub plików biurowych. Natychmiastowe uruchomienie sieci web Szybkie uruchomienie ulubionej strony sieci web. Wstępne ustawienia funkcji Splendid Umożliwia wybór spośród sześciu wstępnych ustawień wyświetlania.
Funkcja Opis Wybieranie wyjścia wyświetlania Szybkie przełączanie pomiędzy komputerem notebook, zewnętrznym monitorem i drugim monitorem. Funkcja ta naśladuje sekwencję + , uruchamiającą przełączanie LCD/monitora touchpada. Połączenie bezprzewodowe Umożliwia włączenie lub wyłączenie Wi-Fi i Bluetooth. Funkcja ta naśladuje sekwencję + , przełączającą WLAN/Bluetooth. Sterowanie multimediami Szybkie uruchomienie Windows Media Player i odtwarzanie/wstrzymanie odtwarzania multimediów.
4 Rozdział 4: Używanie komputera
Urządzenie wskazujące Komputer notebook PC posiada zintegrowane urządzenie wskazujące o nazwie touchpad, wrażliwe na naciskanie i nie zawierające części ruchomych. Do pracy z niektórymi aplikacjami wymagany jest sterownik. Przycisk prawego kliknięcia (strefa na zewnątrz kropkowanej linii) Przycisk lewego kliknięcia (strefa wewnątrz kropkowanej linii) Do obsługi touchpada NIE należy używać żadnych innych obiektów zamiast palca. Mogą one uszkodzić powierzchnię touchpada.
Używanie touchpada Touchpad to urządzenie interaktywne, które symuluje funkcje normalnej myszy. Umożliwia to wykonywanie gestów jednym lub wieloma palcami dla przesunięcia wskaźnika w celu wyboru i kliknięcia elementów, obracania i powiększania obrazów, przewijania list oraz do przesuwania i przełączania okien. Przesuwanie wskaźnika Można kliknąć w dowolnym miejscu touchpada w celu uaktywnienia jego wskaźnika, a następnie przesunąć palcem po touchpadzie w celu przesunięcia wskaźnika ekranowego.
Ilustracje używania touchpada Stuknięcie - Stuknięcie touchpada umożliwia wybór elementów ekranowych i otwieranie plików. Stuknij raz, aby wybrać element. Stuknij dwukrotnie, aby otworzyć wybrany element. Kliknięcie - Kliknięcie touchpada, symuluje funkcje lewego przycisku myszy i prawego przycisku myszy. Kliknięcie lewym przyciskiem Kliknięcie prawym przyciskiem Kliknij raz, aby wybrać element, Kliknij raz w celu wyboru elementu a następnie kliknij dwukrotnie w i sprawdzenia jego opcji menu.
Obracanie - Obracanie obrazów zgodnie/przeciwnie do kierunku ruchu wskazówek zegara wykonuje się na touchpadzie gestem zbliżenia palców. W celu obrócenia obrazu, połóż dwa palce na touchpadzie, a następnie przesuń je ruchem kołowym, zgodnie lub przeciwnie do kierunku ruchu wskazówek zegara. Przewijanie - Używając dwóch palców na touchpadzie, można przewijać listy pionowo i poziomo.
Przesuwanie trzema palcami - Używając trzch palców na touchpadzie, można przesuwać strony od lewej do prawej/od prawej do lewej. Można także wykorzystać ten gest do przełączenia pomiędzy aktywnymi oknami na pulpicie. Dbanie o touchpad Touchpad jest wrażliwy na naciskanie. Niewłaściwa obsługa może spowodować jego łatwe uszkodzenie. Należy zastosować się do następujących środków ostrożności. • Należy sprawdzić, czy touchpad nie jest zabrudzony, nie ma na nim płynów lub nie jest zatłuszczony.
Automatyczne wyłączanie touchpada Po podłączeniu zewnętrznej myszy USB, touchpad można wyłączyć automatycznie. W celu wyłączenia touchpada: 1. Przejdź do Panel sterownia. Zmień ustawienia widoku na Duże ikony, a następnie wybierz Mysz. 2. Wybierz zakładkę ELAN . 3. Zaznacz okno z opcją Wyłącz po podłączeniu zewnętrznego urządzenia wskazującego. 4. Wybierz Zastosuj , aby zapisać bieżące zmiany lub wybierz OK , aby zapisać zmiany, a następnie zakończ.
Urządzenia pamięci masowej Dzięki urządzeniom pamięci masowej notebook może odczytywać lub zapisywać dokumenty, obrazy i inne pliki w różnych urządzeniach przechowywania danych. Napęd optyczny (w wybranych modelach) Wkładanie dysku optycznego 1. Przy włączonym zasilaniu notebooka, naciśnij przycisk wysuwania napędu, po czym nastąpi częściowe wysunięcie tacy. 2. Delikatnie pociągnij panel przedni i wysuń tacę całkowicie na zewnątrz. Uważaj, aby nie dotknąć soczewki napędu CD i innych mechanizmów.
3. Przytrzymaj dysk za krawędzie i ustaw dysk stroną z nadrukiem skierowaną do góry. Naciśnij po obu stronach centralnej części dysku, aż dysk zaskoczy na zaczep gniazda. Po prawidłowym zamontowaniu, zaczep gniazda powinien wystawać nad dysk. 4. Delikatnie pchnij tacę napędu do wnętrza. Napęd zacznie odczytywać spis zawartości (TOC) dysku. Po zatrzymaniu napędu, dysk jest gotowy do użycia. Słyszalne i wyczuwalne obroty dysku CD są zjawiskiem normalnym przy dużej prędkości odczytu danych.
Wyjmowanie dysku optycznego Wysuń tacę i delikatnie pociągnij za krawędź dysku do góry, pod kątem, w celu wyjęcia dysku z zaczepu gniazda. Wysuwanie awaryjne Przycisk wysuwania awaryjnego znajduje się w otworze na napędzie optycznym i służy do wysuwania tacy napędu optycznego, gdy nie działa wysuwanie elektroniczne. Nie należy używać wysuwania awaryjnego zamiast wysuwania elektronicznego. Należy uważać, aby nie uszkodzić diody sygnalizacyjnej pracy napędu, która znajduje się na tym samym obszarze.
Używanie napędu optycznego Z dyskami optycznymi i sprzętem do ich odtwarzania należy obchodzić się z ostrożnością, ponieważ są to mechanizmy precyzyjne. Należy stosować się do zaleceń dostawców CD. W odróżnieniu od napędów optycznych w komputerach typu desktop, notebook wykorzystuje zaczep gniazda do ustawienia dysku CD we właściwym miejscu niezależnie od kąta nachylenia.
Czytnik kart pamięci Flash Zwykle czytniki kart ExpressCard lub kart pamięci należy zakupić oddzielnie, aby można było korzystać z kart pamięci takich urządzeń jak aparaty cyfrowe, odtwarzacze MP3, telefony komórkowe i PDA. Ten notebook ma wbudowany pojedynczy czytnik kart pamięci, który może odczytywać wiele rodzajów kart pamięci flash.
Dysk twardy Dyski twarde mają większe pojemności i działają dużo szybciej niż napędy dyskietek i napędy optyczne. Komputer jest dostarczany z wymiennym dyskiem twardym. Aktualnie montowane dyski obsługują technologię S.M.A.R.T. (Self Monitoring and Reporting Technology), umożliwiającą wykrywanie błędów dysków twardych lub awarii przed ich wystąpieniem. W celu wymiany lub modernizacji dysku twardego należy zawsze odwiedzić autoryzowany punkt serwisowy lub sprzedawcę tego komputera.
Lokalizacja dysków twardych Odłączanie dysku twardego 1 1 2 2 2 2 1 1 1 1 2 2 64 Podręcznik użytkownika komputera ASUS
2 1 Instalacja dysku twardego 2 1 2 2 1 2 1 Podręcznik użytkownika komputera ASUS 65
Pamięć operacyjna Dodatkowa pamięć zwiększa wydajność poprzez zmniejszenie częstotliwości dostępu do dysku twardego. W celu uzyskania informacji dotyczących modernizacji pamięci w komputerze należy skontaktować się z autoryzowanym punktem serwisowym lub ze sprzedawcą. W celu zapewnienia maksymalnej zgodności i niezawodności moduły rozszerzenia należy kupować u autoryzowanych sprzedawców tego komputera.
Połączenia Wbudowana sieć nie może być instalowana w późniejszym czasie jako uaktualnienie. Po dokonaniu zakupu sieć może być zainstalowana jako karta rozszerzeń. Połączenie sieciowe Podłącz kabel sieciowy, ze złączami RJ-45 na każdym końcu, do portu karty sieciowej komputera, a drugi koniec do huba lub do switcha. Przy szybkościach transmisji 100 BASE-TX / 1000 BASE-T, jako kabel sieciowy należy stosować skrętkę kategorii 5 lub wyższej (nie w kategorii 3).
Skrętka kablowa Kabel wykorzystywany do podłączenia karty sieciowej Ethernet do hosta (generalnie hub lub switch) to nieskrosowana skrętka Ethernet (TPE). Końcowe złącza nazywają się RJ-45 i nie są zgodne ze złączami telefonicznymi RJ-11. Do połączenia ze sobą dwóch komputerów bez huba wymagany jest skrosowany kabel LAN (model FastEthernet). (Modele Gigabitowe obsługują automatyczne krosowanie, więc skrosowany kabel LAN jest w tym przypadku opcjonalny.
Połączenie bezprzewodowej sieci LAN (w wybranych modelach) Opcjonalna, wbudowana bezprzewodowa karta sieci LAN, to kompaktowy, łatwy w użyciu adapter bezprzewodowej sieci Ethernet. Poprzez zastosowanie standardu IEEE 802.11 bezprzewodowych sieci LAN (WLAN), karta sieci LAN może zapewnić szybką transmisję danych, poprzez technologie DSSS (Direct Sequence Spread Spectrum) i OFDM (Orthogonal Frequency Division Multiplexing) przy częstotliwościach 2,4GHz/5GHz.
Tryb Ad-hoc Tryb Ad-hoc umożliwia połączenie komputera z innym urządzeniem bezprzewodowym. W tym środowisku bezprzewodowym nie jest wymagany punkt dostępowy (AP). (Wszystkie urządzenia muszą mieć zainstalowane opcjonalne adaptery bezprzewodowej sieci LAN 802.11.
Połączenie bezprzewodowej sieci w systemie Windows Podłączenie do sieci 1. Włącz przełącznik sieci bezprzewodowej, jeśli istnieje w posiadanym modelu (patrz przełączniki w części 3). 2. Naciśnij powtarzająco kombinację klawiszy [Fn] + [F2], aż do wyświetlenia ikony bezprzewodowej sieci LAN i ikony bluetooth (w wybranych modelach). Lub kliknij dwukrotnie ikonę Konsola sieci bezprzewodowej w obszarze powiadamiania Windows i wybierz ikonę bezprzewodowa sieć LAN. 3.
5. Po połączeniu, może być konieczne wprowadzenie hasła. 6. Po ustanowieniu połączenia, zostanie ono pokazane na liście. 7. W obszarze powiadamiania pojawi się ikona sieci bezprzewodowej . Po naciśnięciu + w celu wyłączenia funkcji WLAN, pojawia się przekreślona ikona sieci bezprzewodowej .
Połączenie bezprzewodowe Bluetooth (w wybranych modelach) Komputery z technologią Bluetooth, eliminują konieczność używania kabli do podłączania urządzeń z włączoną funkcją Bluetooth. Przykładowymi urządzeniami z włączoną funkcją Bluetooth mogą być komputery typu notebook, komputery typu desktop, telefony komórkowe i PDA. Jeśli komputer nie posiada wbudowanej funkcji Bluetooth, aby można było używać Bluetooth należy podłączyć moduł Bluetooth USB lub ExpressCard.
Lub kliknij dwukrotnie ikonę Konsola sieci bezprzewodowej w obszarze powiadamiania Windows i wybierz ikonę Bluetooth. 3. �� W Panelu sterowania, przejdź do Sieć i Internet > Centrum sieci i udostępniania, a następnie kliknij Zmień ustawienia adaptera w lewym, niebieskim panelu�. 4. ��������������������������� Kliknij prawym przyciskiem Połączenie sieciowe Bluetooth i wybierz Widok urządzeń sieciowych Bluetooth�. 5. �������� Kliknij Dodaj urządzenie w celu wyszukania nowych urządzeń.
6. ����������������������������� Wybierz z listy urządzenie z włączoną funkcją Bluetooth i kliknij Dalej. 7. �������������������������� Wprowadź w urządzeniu kod zabezpieczenia Bluetooth i uruchom parowanie�. 8. ������������������� Zostanie pomyślnie utworzona relacja parowania. Kliknij Zamknij, aby zakończyć wykonywanie ustawienia�.
Ładowarka USB+ Ładowarka USB+ pomaga w łądowaniu urządzeń USB, zgodnych z wersją specyfikacji ładowania baterii 1.1 (BC 1.1), przy włączonym lub wyłączonym zasilaniu komputera notebook PC. W celu zatrzymania ładowania zgodnie z potrzebami, można określić i ustawić próg czułości baterii.� Z adapterem Funkcja Ładowarka USB+ jest zawsze dostępna w określonym porcie USB 3.0, po połączeniu komputera notebook PC z adapterem. Bez adaptera Aby włączyæ funkcję Ładowarka USB+ 1.
D Dodatek
Akcesoria opcjonalne Elementy te, w przypadku takiego życzenia, są dostarczane jako elementy opcjonalne uzupełniające komputer. Hub USB Podłączenie opcjonalnego huba USB zwiększy liczbę portów USB i umożliwi szybkie podłączenie lub odłączenie wielu urządzeń peryferyjnych USB poprzez pojedynczy kabel. Dysk pamięci Flash USB Dysk pamięci flash USB jest elementem opcjonalnym, który może zapewnić do kilkudziesięciu gigabajtów miejsca na zapis, wyższą szybkość zapisu i większą wytrzymałość.
System operacyjny i oprogramowanie Ten komputer może być dostarczony do klienta (w zależności od terytorium) z wybranym, wstępnie zainstalowanym systemem operacyjnym, takim jak Microsoft Windows. Możliwość wyboru i język zależą od terytorium. Poziomy sprzętu i oprogramowania mogą się różnić w zależności od zainstalowanego systemu operacyjnego. Nie można zagwarantować stabilności i zgodności innych systemów operacyjnych.
Ustawienia systemu BIOS Wygląd ekranów BIOS w tej części służy wyłączenie jako odniesienie. Boot Device (Urządzenie rozruchowe) 1. Na ekranie Boot (Uruchamianie), wybierz Boot Option #1 (Opcja uruchamiania #1). Main Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Chipset Boot Security Save & Exit Enables/Disables UEFI boot from disks. Boot Configuration UEFI Boot Launch PXE OpROM [Enabled] [Disabled] Boot Boot Boot Boot [P0: WDC WD7500BPKT...] [P2: MATSHITABD-MLT...
Security Setting (Ustawienie zabezpieczenia) Main Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Boot Security Save & Exit If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the user’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup, the User will have Administrator rights.
Zabzpieczenie interfejsu We/Wy Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Security If Locked, 2nd SATA HDD will be disabled. I/O Interface Security LAN Network Interface Wireless Network Interface HD AUDIO Interface SATA ODD Interface USB Interface Security [UnLock] [UnLock] [UnLock] [UnLock] LAN Network Interface Lock UnLock : Select Screen : Select Item Enter: Select +/—: Change Opt. F1: General Help F9: Optimized Defaults F10: Save ESC: Exit Version 2.01.1208.
Zabezpieczenie interfejsu USB Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Security If Locked, all USB device will be disabled. USB Interface Security USB Interface [UnLock] External Ports BlueTooth CMOS Camera Card Reader [UnLock] [UnLock] [UnLock] [UnLock] USB Interface LocK UnLock : Select Screen : Select Item Enter: Select +/—: Change Opt. F1: General Help F9: Optimized Defaults F10: Save ESC: Exit Version 2.01.1208. Copyright (C) 2011 American Megatrends, Inc.
Hasło dysku twardego Main Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Boot Security Save & Exit If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the user’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup, the User will have Administrator rights.
Save Changes (Zapisanie zmian) Aby zachować ustawienia konfiguracji, przed zakończeniem programu konfiguracji BIOS należy zapisać zmiany. Main Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Chipset Boot Security Save & Exit Save Changes and Exit Discard Changes and Exit Exit system setup after saving the changes.
Popularne problemy i ich rozwiązania Problem sprzętowy - dysk optyczny Napęd dysku optycznego nie może odczytywać lub zapisywać dysków. 1. Zaktualizuj BIOS do najnowszej wersji i spróbuj ponownie. 2. Jeśli aktualizacja BIOS nie pomaga, spróbuj użyć lepszej jakości dysków i spróbuj ponownie. 3. Jeśli problem dalej utrzymuje się, skontaktuj się z lokalnym centrum serwisowym i poproś inżyniera serwisu o pomoc. Nieznany powód - niestabilność systemu Nie można wybudzić komputera z hibernacji. 1.
Problem sprzętowy - Wbudowana kamera Wbudowana kamera nie działa prawidłowo. 1. Sprawdź “Menedżer urządzeń”, aby ocenić, czy nie są tam widoczne problemy. 2. Spróbuj przeinstalować sterownik kamery sieci web w celu rozwiązania problemu. 3. Jeśli problem nie został rozwiązany, zaktualizuj BIOS do najnowszej wersji i spróbuj ponownie. 4. Jeśli problem dalej utrzymuje się, skontaktuj się z lokalnym centrum serwisowym i poproś inżyniera serwisu o pomoc. Problem sprzętowy - Bateria Konserwacja baterii. 1.
Symptomy i rozwiązania: A. Problem może dotyczyć MB, HDD lub NB; w celu uzyskania pomocy należy udać się do lokalnego punktu serwisowego. B. Problem jest spowodowany przez system operacyjny, spróbuj odtworzyć system z partycji przywracania lub z dysku DVD. WAŻNE: Przed wykonaniem przywracania należy wykonać kopię zapasową wszystkich danych i zapisać ją w innym miejscu. C. Problem z adapterem; sprawdź połączenia przewodu zasilającego albo udaj się do lokalnego punktu serwisowego w celu wymiany. D.
OSTRZEŻENIE: W celu zabezpieczenia przed wirusami, nie należy łączyć się z Internetem przed zainstalowaniem oprogramowania antywirusowego i firewalla połączeń z Internetem. Problem programowy - pakiet oprogramowania ASUS Po włączeniu zasilania komputera, wyświetlany jest komunikat o błędzie otwarcia pliku. A. W celu rozwiązania problemu, zainstaluj najnowszą wersję programu narzędziowego “Power4 Gear”. Program ten jest dostępny na stronie sieci web ASUS.
5. Jeśli problem nadal nie został rozwiązany, zastosuj proces przywracania w celu przeinstalowania całego systemu. WAŻNE: Przed wykonaniem przywracania należy wykonać kopię zapasową wszystkich danych i zapisać ją w innym miejscu. OSTRZEŻENIE: W celu zabezpieczenia przed wirusami, nie należy łączyć się z Internetem przed zainstalowaniem oprogramowania antywirusowego i firewalla połączeń z Internetem.
Problem z oprogramowaniem - BIOS Aktualizacja BIOS. 1. Sprawdź dokładnie model komputera i pobierz dla niego plik najnowszego systemu BIOS z witryny firmy ASUS, a następnie zapisz go na nośniku pamięci flash. 2. Podłącz nośnik pamięci flash do komputera i włącz go. 3. Użyj funkcji „Start Easy Flash” na w zakładce "Advanced" konfiguracji systemu BIOS. Postępuj zgodnie z instrukcjami. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Przywracanie ustawień komputera Wykorzystanie partycji przywracania Partycja przywracania umożliwia szybkie przywrócenie oryginalnego stanu działania oprogramowania komputera. Przed użyciem funkcji Partycja przywracania, skopiuj pliki z danymi (takie jak pliki PST Outlook) na nośniki danych lub na dysk sieciowy i zapisz dostosowane ustawienia konfiguracji (takie jak ustawienia sieciowe).
Przywracanie systemu Windows na całym dysku twardym. Ta opcja usuwa wszystkie partycje z dysku twardego i tworzy nową partycję systemową, jako napęd “C”. Przywracanie systemu Windows na całym dysku twardym z 2 partycjami. Ta opcja usuwa wszystkie partycje z dysku twardego i tworzy dwie nowe partycje “C” (40%) i “D” (60%). 6. Wykonaj instrukcje ekranowe w celu dokończenia procesu przywracania. W celu pobrania zaktualizowanych sterowników i narzędzi należy odwiedzić stronę sieci web www.asus.
Używanie dysku Recovery DVD: 1. Włóż dysk Recovery DVD do napędu optycznego. Komputer wymaga włączenia zasilania. 2. Uruchom komputer i naciśnij podczas uruchamiania oraz wybierz napęd optyczny (może być oznaczony jako “CD/DVD”) naciskając kursor w dół i przycisk w celu uruchomienia dysku Recovery DVD. 3. Wybierz OK w celu rozpoczęcia przywracania obrazu. 4. Wybierz OK, aby potwierdzić przywracanie systemu. Przywracanie spowoduje nadpisanie dysku twardego.
Informacja dotycząca napędu DVD-ROM Komputer dostarczany jest z opcjonalnym napędem DVD-ROM. W celu przeglądania tytułów DVD, konieczne jest zainstalowanie własnej przeglądarki oprogramowania DVD. Opcjonalne oprogramowanie przeglądarki DVD można zakupić z tym komputerem. Napęd DVD-ROM umożliwia stosowanie dysków CD i DVD. Informacje dotyczące regionalnego odtwarzania Odtwarzanie tytułów filmu DVD obejmuje dekodowanie wideo MPEG2, cyfrowe audio AC3 i deszyfrowanie zawartości zabezpieczonych poprzez CSS.
Definicje regionów Region 1 Kanada, USA, terytoria USA Region 2 Czechy, Egipt, Finlandia, Francja, Niemcy, kraje Zatoki Perskiej, Węgry, Islandia, Iran, Irak, Irlandia, Włochy, Japonia, Holandia, Norwegia, Polska, Portugalia, Arabia Saudyjska, Szkocja, Republika Południowej Afryki, Hiszpania, Szwecja, Szwajcaria, Syria, Turcja, Wielka Brytania, Grecja, kraje dawnej Jugosławii, Słowacja Region 3 Birma, Indonezja, Korea Południowa, Malezja, Filipiny, Singapur, Tajwan, Tajlandia, Wietnam Region 4 Australia, Ka
Informacje o napędzie Blu-ray ROM (w wybranych modelach) Definicje regionu Region A Kraje Ameryki Północnej, Środkowej i Południowej oraz ich terytoria; Tajwan, Hong Kong, Makao, Japonia, Korea (Południowa i Północna), kraje Azji Południowo Wschodniej i ich terytoria. Region B Kraje Europy, Afryki i Azji Południowo Zachodniej oraz ich terytoria; Australia i Nowa Zelandia. Region C Kraje Europy Środkowej, Wschodniej, Azji Południowej i ich terytoria; Chiny i Mongolia.
Zgodność wewnętrznego modemu Komputer z wewnętrznym modemem, jest zgodny ze standardami JATE (Japonia), FCC (USA, Kanada, Korea, Tajwan) i CTR21. Wewnętrzny modem posiada certyfikat zgodności z Decyzją Rady 98/482/EC dotyczącą pan-Europejskich, pojedynczych połączeń terminalowych z publiczną, telefoniczną siecią przełączaną (PSTN). Jednakże, ze względu na różnice pomiędzy indywidualnymi PSTN w różnych krajach, certyfikat nie daje bezwarunkowej pewności prawidłowego działania w każdym punkcie sieci PSTN.
Deklaracja zgodności sieci Oświadczenie producenta dla użytkownika: “Deklaracja ta wskazuje sieci, w których może działać ten sprzęt i sieci, w których mogą pojawić się problemy dotyczące współdziałania. Producent może także dołączyć oświadczenie, aby wyjaśnić gdzie zgodność sieci zależy od ustawień fizycznych i ustawień oprogramowania. Znajduje się tam także zalecenie, aby użytkownik skontaktował się ze sprzedawcą, jeśli chce używać to urządzenie w innej sieci.
W tej tabeli wymieniono kraje aktualnie zgodne ze standardem CTR21.
Ta informacja została skopiowana z CETECOM i została dostarczone bez odpowiedzialności. Aktualizacje dotyczące tej tabeli, znajdują się pod adresem http://www.cetecom.de/technologies/ctr_21.html 1 Wymagania krajowe będą miały zostosowanie wyłącznie wtedy, gdy urządzenie będzie wykorzystywało wybieranie impulsowe (w tej instrukcji użytkownika producenci utrzymują, że urządzenie może obsługiwać wyłącznie sygnałowanie DTMF, co może wymagać dodatkowych testów).
Deklaracje i oświadczenia dotyczące bezpieczeństwa Oświadczenie o zgodności z przepisami Federal Communications Commission (FCC) Urządzenie to jest zgodne z częścią 15 zasad FCC. Jego działanie podlega następującym dwóm warunkom: • Urządzenie to nie może powodować zakłóceń. • Urządzenie to musi przyjmować wszelkie odebrane zakłócenia, z uwzględnieniem zakłóceń, które mogą powodować niepożądane działanie.
(Przedruk ze zbioru przepisów Federal Regulations #47, część 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and Records Administration, U.S. Government Printing Office.) Oświadczenie FCC dotyczące ostrzeżenia o ekspozycji częstotliwości radiowej (RF) Jakiekolwiek zmiany lub modyfikacje wykonane bez wyraźnego zezwolenia strony odpowiedzialnej za zgodność, mogą spowodować pozbawienie użytkownika prawa do używania tego urządzenia.
Ostrzeżenie znaku CE Oznakowanie CE dla urządzeń bez obsługi bezprzewodowej sieci LAN/funkcji Bluetooth Dostarczana wersja tego urządzenia jest zgodna z wymogami dyrektyw dotyczących „Kompatybilności elektromagnetycznej” EEC 2004/108/EC i „Dyrektywą niskonapięciową” 2006/95/EC. Oznakowanie CE dla urządzeń z obsługą bezprzewodowej sieci LAN/funkcji Bluetooth Niniejsze urządzenie jest zgodne z wymogami dyrektywy 1999/5/EC Parlamentu Europejskiego i Komisji Europejskiej z 9 marca 1999 r.
Kanał operacji bezprzewodowych dla różnych domen Ameryka Północna Japonia Europa ETSI 2.412-2.462 GHz 2.412-2.484 GHz 2.412-2.472 GHz Kanał 01 do 11 Kanał 01 do 14 Kanał 01 do 13 Ograniczenie pasma częstotliwości bezprzewodowych we Francji Niektóre obszary we Francji mają ograniczone pasmo częstotliwości. W najgorszym przypadku, maksymalna, autoryzowana moc wewnątrz pomieszczeń może wynosić: • 10mW dla całego pasma 2,4 GHz (2400 MHz - 2483.
60 64 68 75 88 94 Oise 61 Orne 63 Puy du Dôme Pyrénées Atlantique 66 Pyrénées Orientales 67 Bas Rhin Haut Rhin 70 Haute Saône 71 Saône et Loire Paris 82 Tarn et Garonne 84 Vaucluse Vosges 89 Yonne 90 Territoire de Belfort Val de Marne To wymaganie może z czasem ulec zmianie, umożliwiając korzystanie z kart bezprzewodowych sieci LAN na dalszych terenach w obrębie Francji. W celu uzyskania najnowszych informacji należy skontaktować się z ART (http://www.arcep.fr).
Uwagi UL dotyczące bezpieczeństwa Sprzęt określony przez standard UL 1459, obejmujący telekomunikację (telefon), powinien być elektrycznie połączony z siecią telekomunikacyjną, przy różnicy napięcia roboczego w stosunku do uziemienia, nie przekraczającej 200V (peak), 300V peakto-peak, i 105V rms, a także powinien być zainstalowany lub używany zgodnie z przepisami Państwowych Przepisów Elektrycznych (NFPA 70).
Wymagania dotyczące bezpieczeństwa zasilania Do zasilania produktów wymagających prądu elektrycznego do 6A o ciężarze większym niż 3kg, konieczne jest stosowanie certyfikowanych przewodów zasilających większych lub równych: H05VV-F, 3G, 0,75mm2 lub H05VV-F, 2G, 0,75mm2.
Ostrzeżenia dotyczące baterii litowych dla krajów skandynawskich (dotyczą baterii litowo-jonowych) CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. (English) ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica.
Informacje dotyczące bezpieczeństwa napędu optycznego Informacja dotycząca bezpieczeństwa korzystania z lasera Sprzedawane z tym komputerem wewnętrzne lub zewnętrzne napędy optyczne, zawierają PRODUKT LASEROWY KLASY 1. Klasyfikacje lasera znajdują się w słowniku na końcu tego podręcznika użytkownika. OSTRZEŻENIE: Wykonywanie regulacji lub przygotowanie procedur innych, niż określone w tym podręczniku użytkownika, może spowodować narażenie na niebezpieczne działanie lasera.
Uwaga dotycząca produktów Macrovision Corporation Produkt ten zawiera technologię ochrony praw autorskich, wykorzystującą pewne rozwiązania opatentowane w USA oraz podlegające innym prawom o ochronie dóbr intelektualnych, które są własnością firmy Macrovision Corporation i innych prawnych właścicieli. Korzystanie z niniejszej technologii ochrony praw autorskich musi być autoryzowane przez firmę Macrovision Corporation.
Certyfikat CTR 21 (dla komputerów notebook PC z wbudowanym modemem) Danish Dutch English Finnish French German Greek Italian Portuguese D-36 Podręcznik użytkownika komputera ASUS
Spanish Swedish Podręcznik użytkownika komputera ASUS D-37
Etiqueta Ecológica da União Européia Este Notebook PC recebeu a etiqueta da EU Flower, o que significa que este produto tem as seguintes características: 1. Consumo de energia reduzido durante o uso e modos de espera. 2. Uso limitado de metais pesados tóxicos. 3. Uso limitado de substâncias prejudiciais ao meio ambiente e à saúde. 4. Redução do uso de recursos naturais por meio do encorajamento da reciclagem. 5.
Zgodność i deklaracja zgodności z ogólnoświatowymi przepisami ochrony środowiska Firma ASUS wprowadza koncepcje ekologii podczas projektowania i produkcji produktów, a także zapewnia, że na każdym etapie cyklu żywotności produktu ASUS, będzie on zgodny z ogólnoświatowymi przepisami ochrony środowiska. Dodatkowo, ASUS udostępnia odpowiednie informacje, w oparciu o wymagania przepisów. Sprawdź stronę sieci web http://csr.asus.com/english/Compliance.
Informacje o prawach autorskich Żadnej z części tego podręcznika, włącznie z opisami produktów i oprogramowania, nie można powielać, transmitować, przetwarzać, przechowywać w systemie odzyskiwania danych lub tłumaczyć na żadne języki, w jakiejkolwiek formie lub w jakikolwiek sposób, bez wyraźnego pisemnego pozwolenia ASUSTeK COMPUTER, INC. (“ASUS”).
Ograniczenie odpowiedzialności W przypadku wystąpienia określonych okoliczności, za które odpowiedzialność ponosi ASUS, a w wyniku których wystąpiły szkody, właściciel będzie uprawniony do uzyskania od firmy ASUS odszkodowania.
EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address, City: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C. Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.